a. Determine the safe uniform load that the beam could carry over a 5 meterb. Determine the required spacing of bolts Wide FlangeA = 14000 mm²Ix = 435 x 106 mmªIy 90.6 x 106 mmtw = 10 mmd = 400 mmFb = 138 MPaDiameter of bolt = 18 mmPlateA = 3000 mm²=Ix 100 x 106 mm4Iy = 2.4 x 106 mm410 mmtw =Fb = 110 MPaFv bolt 100 MPa

We need to first locate the centroid of the section in order to calculate the Moment of inertia…

Answered: a. Determine the safe uniform load that…

Engineering

Civil Engineering

a. Determine the safe uniform load that the beam could carry over a 5 meter b. Determine the required spacing of bolts

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: What is the Nominal Shear Capacity of the following shear splice 3/4" A325N bolts W18x35 W24x55 F1…

A: Anb = 3.14 x (3/4)2 = 1.76625 sq inch fu = 105ksi FOS = 1.25

Q: From the above figure, determine the numbe a. 10 x 20 x 40 cm CHB b. Vertical reinforcement spaced…

A: I have solved your problem

Q: draw -for the tread bars - 3-D 10 mm -for teh iser bars- d 10 mm @150 mm o.c. size of wooden…

A: We need to draw the reinforcement details of tread and riser

Q: Determine the net tensile area for the connection plate shown. Use a 3/8" plate with 3/4" bolts with…

A: Given data, Plate thickness (t)= (3/8) = inches Bolt dia = (3/4) inches So, hole diameter= dh =…

Q: Find out the strength and efficiency of a bolted lap joint .The bolts are of 30mm diameter, grade…

A: Diameter of bolt, d= 30 mmDiameter of bolt hole, do=30+2.5=32.5 mmFor bolts of grade 4.6 fub =400…

Q: How many inches of 1/8-in weld are necessary to transfer a shear force of 6000 lb from one plate to…

A: The objective of the question is to find out the length of the weld required to transfer a shear…

Q: A 22.2 mm diameter bolt having a diameter at the root of the threads of 18.6 mm is used to fasten…

A: db = 22.2 mmd = 18.6 mm = 34 kPa

Q: 7. Compute the tensile capacity for the A36 steel plate shown. Bolts are 7/8 in diameter. Neglect…

A: For A36 steelUltimate Tensile Strength, fu = 58,000 psiYield Tensile Strength, fy = 36,300 psiThe…

Q: Draw and label the different types of trusses according to their classifications as to Simple,…

A: Answer Simple Truss Simple truss begins with 3 bar forming a triangular element but can be expanded…

Q: Find out the strength and efficiency of a bolted lap joint .The bolts are of 30mm diameter, grade…

A: Diameter of bolt, d= 30 mmDiameter of bolt hole, do=30+2.5=32.5 mmFor bolts of grade 4.6 fub =400…

Q: discuss the possible failure modes when in different bolts when the bolts are subjected to shear,…

A: ## Potential Failure Modes of Bolts in Shear, Tension, or Both**Understanding Bolt Failure**Bolts, a…

Q: you were asked to increase the tensile strength of an existing truss tension member.…

Q: What is the required diameter of sag rods in mm? Considering sag rods and tie rods at midspan…

Q: 2. PLATE WITH STAGGERED BOLTS Compute A and A for a 14-in.-wide and 2-in.-thick plate subject to…

Q: Determine (approximately) the force in each truss member of the portal frame. Assume all members of…

Q: Required: block shear strength of the gusset plate.

A: Plate 6 x 1/2 weld length in shear = 71/2 weld length in tension = 6 in thickness of plate t = 1/2…

Q: please use BS 5950 for steelworks

A: Please refer below pages.If you have any doubts please feel free to ask.Explanation:Step 1:Step…

Q: A secondary timber member in a warehouse is made of seasoned MGP10 grade timber. The length of the…

A: To determine if a 140x45mm timber section is adequate to resist the applied tension forces in a…

Q: Problem 3.. for 7/8 in bolts. . Compute the net area for the 7/8 x 12 plate shown below. The holes…

Q: Do bolts, rivets and pins create stresses on the points of contact or bearing surfaces of the member…

A: It is asked whether the statement is true or false. Since, Bolts, rivets and pins are used to…

Q: Question 3) The tension member shown in Figure 1 contains holes for in. bolts. At what spacing, s,…

A: We need to calculate spacing between two bolts.

Q: What is the wet service factor, Cm, for a nailed connection that is "wet" (MC>19%) at the time of…

A: Given data: wet service factor nailed connection wet at the time of fabrication nailed connection…

Q: a) Determine the net area to satisfy block shear check for the plate shown below: PL 4X10 3"8 bolts…

Q: Calculate the minimum girder width to fit the longitudinal bars shown that have center-to-center…

A: Given data: Total depth of the beam, D=20 in Diameter of main reinforcing bar,d=98=1.125 in Center…

Q: etermine the net area An of a 1/4 in by 4 inches plate and the diameter of the bolt is 7/8 in.…

A: width of plate=4in thickness of plate=1/4in diameter of bolt=7/8 in to find net area of plate

Q: Problem # 5: The figure shows a roof truss and the detail of connection at joint I. The allowable…

A: Given allowable stresses for shear = 70 MPa, for bearing = 135 MPa…

Q: High-strength bolts may be tightened until they have very high ....stresses Weights (A) shear…

A: High-strength bolts may be tightened until they have very high .......stresses WeightsPmf, which is…

Q: Compute A,, and A, for a 14-in.-wide and ½-in.-thick plate subject to tensile loading with staggered…

A: Given : Width = 14 inches Thickness = 1/2 inches Compute An and Ae for the given plate ?

Q: Solution accu

A: Approach to solving the question:Understand the concept of net area: The net area is the effective…

Q: 9.0 A C12 x 30 is connected with 25 mm diameter bolts in each flange, as shown. If Fy= 345 MPa, Fu=…

Q: a) What is traffic management? b) Enumerate and explain four (4) types of traffic management…

A: The traveling, visiting places, and imports and exports are only done by the transportation facility…

Q: Please make a step by step procedure on how to calculate the maximum shearing stress experienced by…

A: Structural joints made by joining two or more pieces of metal together with welding techniques are…

Q: -1. Determine whether the W14 x 34 beam shown in Figure 11-43 is adequate for flexural rupture and…

A: Beam size: W 14 x 34Steel grade: 50 (ASTM A992)To find:Check the adequacy against flexural rupture…

Q: subject

Question

a. Determine the safe uniform load that the beam could carry over a 5 meter
b. Determine the required spacing of bolts

Wide Flange
A = 14000 mm²
Ix = 435 x 106 mmª
Iy 90.6 x 106 mm
tw = 10 mm
d = 400 mm
Fb = 138 MPa
Diameter of bolt = 18 mm
Plate
A = 3000 mm²
=
Ix 100 x 106 mm4
Iy = 2.4 x 106 mm4
10 mm
tw =
Fb = 110 MPa
Fv bolt 100 MPa

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1: Calculation of the location of the centroidal axis

VIEW

Step 2: Calculation of Moment of inertia of the section

VIEW

Step 3: Calculation of Moment capacity and safe uniform load

VIEW

Step 4: Calculation of required spacing of bolts

VIEW

Solution

VIEW

Step by step

Solved in 5 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

PROBLEM. DETERMINE THE DESIGN CAPACITY OF THE GIVEN TENSION MEMBER ASSUME THAT THE SLENDERNESS REQUIREMENT IS SATISFIED AND THE PLATE AND CONNECTION DESIGN ARE ADEQUATE. UKSE LREB SPECIFICATIONS ASTM A36 (Fy=36 KS) ;FU=58 KSI) A-DETERMINE THE CAPACITY OF THE SECTION BASED ON THE YIELDING OF GROSS IDEA. B DETERMINE THE CAPACITY OF THE SECTION BASED ON TENSILE FRACTURE OF THE CRITICAL CONSIDER ALL POSSIBLE RUPTURE CONNECTING PLATE دریا 2." 1.5 ju 12 · PL 3/4" X 60 "1/2" & bolts
Problem 3.. for 7/8 in bolts. . Compute the net area for the 7/8 x 12 plate shown below. The holes are 2 in O 3 in 3 in 4 in 3 in 2 in PL 7/8 x 12 12 in-
11-1. Determine whether the W14 x 34 beam shown in Figure 11-43 is adequate for flexural rupture and flexural yielding at the cope. The steel is ASTM A992, grade 50. 1/2" W14x34 R₁ = 40kips FIGURE 11-43 Detail for Exercise 11-1
Answer only letter D, E, F
For the connection shown, the average shear stress in the 12-mm-diameter bolts must be limited to 220 MPa. Determine the maximum load P that may be applied to the connection. O 164 KN 149 kN O 94 KN O 109 kN O 122 kN
Using the principles of zero force member, determine which members are zero force members? Assume all joints are equally spaced horizontally and vertically. [Must show work to receive partial credit] P1 ct B E H F J K L P2
Two steel plate tension members have been connected using 0.72 inch diameter bolts arranged in an equally-spaced 9 by 3 rectangular formation. Both plates have a thickness equal to 1/3 in. Take shear fracture stress as 51.2 ksi, clear distance for each edge bolt as 0.12 in, and the clear distance for the other bolts as 1.072 in. a)Sketch the connection showing all the details and measurements with units. b)Find the maximum allowable service dead load and live load assuming live load is half as much as dead load. Consider ASD.
A steel plate is 300 mm wide and 40 mm thick is connected using 24 mm dia bolts of 3 numbers. The net sectional area of the plate is
#9
1. An L 178 x 102 x 19 with one line of 20mm diameter bolts in each leg in usual gage as shown. Assume the connection length is 450mm. The pitch distance for the subsequent standard size holes is 75mm. Use ASTM A572M Grade 345 steel materials and : a. Determine the design strength of the member. b. Specify the maximum permitted length of the member as per AISC specifications.) 102mm g g 19mm 178mm L 178 x 102 x 19 Gusset Plate
Thank youu
The tension member shown in the figure is connected to a gusset plate as shown with 1.210-inch diameter bolts. It is subjected to the dead and live loads as shown. Take Fy = 33.29 ksi and Fu = 52.93 ksi. Assume Ae = An. a) Draw the critical cross-section and show its dimensions using your data. b) Determine whether this member has enough strength using LRFD and the critical ASCE 7 loading combination.