A well is 3500 meters deep and 3100 meters vertically deep. It is filled with two drilling fluids, the first with a density of 10.5 lb/gal located up to 1000 meters and the rest of the well is filled to the bottom with fluid with a density of 12 lb/gal. During the operation, a wellhead pressure equivalent to 320 psi was recorded. With these data in hand, the pressures occurred at the bottom of the well and the equivalent density of the bottom of the well in lb/gal are, respectively. The. 6389 psi/ 12.12 lbs/gal 6429 psi/ 12.1 lbs/gal 5959 psi/13.2 lbs/gal 6220 psi/11.9 lbs/gal

A well is 3500 meters deep and 3100 meters vertically deep. It is filled with two drilling fluids, the first with a density of 10.5 lb/gal located up to 1000 meters and the rest of the well is filled to the bottom with fluid with a density of 12 lb/gal. During the operation, a wellhead pressure equivalent to 320 psi was recorded. With these data in hand, the pressures occurred at the bottom of the well and the equivalent density of the bottom of the well in lb/gal are, respectively. The. 6389 psi/ 12.12 lbs/gal 6429 psi/ 12.1 lbs/gal 5959 psi/13.2 lbs/gal 6220 psi/11.9 lbs/gal

Name: A well is 3500 meters deep and 3100 meters vertically deep. It is fil
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A well is 3500 meters deep and 3100 meters vertically deep. It is filled with two drilling fluids, thefirst with a density of 10.5 lb/gal located up to 1000 meters and the rest of the well is filled to thebottom with fluid with a density of 12 lb/ga

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The fuel gage for a gasoline tank in a car reads proportionalto the bottom gage pressure as in Fig. . Ifthe tank is 30 cm deep and accidentally contains 2 cmof water plus gasoline, how many centimeters of airremain at the top when the gage erroneously reads“full”?
The gauge pressure in a pipe is measured by a manometer containing mercury (density 0f 13,600 kg/m^3). The top of the mercury is open to the atmosphere and the atmospheric pressure is 100 Kpa. If the mercuty column height is 24 cm, the gage pressure in the pipe in kPa is (WITH FREE BODY DIAGRAM)
Two pipes A & B carries an oil of specific gravities 0.9 & 1.2 respectively. The center of the pipe A is 35 cm above the pipe B. The height of oil in right limb is 40 cm. Also, the mercury level difference is found in right limb as 80 cm. Find 1-The difference of pressure between two pipes (PA-PB) (Unit is in kPa) = 2-Equivalent to Water head in mm =
The inclined tube manometer shown in the next figure is used to measure small pressure perturbations (Ap). This manometer is composed of a large tube (diameter (D), area (A)) and a small inclined capillary tube (diameter (d), area (a)) and angle (0). Any small pressure difference will result in fluid displacement (Ah) in the large tube and a significant displacement of the fluid in the capillary at a length (AL.). Ap AL initial level Ap (1) Obtain a relationship between (Ah) and (AL) ! (hint: displaced liquid in large tube is equal to that in the small tube ) (2) What the formula for (z2 – 21) ? (hint : height between level 2 and level 1) (3) Express the pressure (Pz-P1) in terms of (AL, 0, p, g, d, and D) ? (4) At what angle should the manometer be adjusted so that (AL-5 Ah) ?
An open tank contains water up to a depth of 1.2m from the bottom and above it mercury for a depth of 0.8m and above it an oil of specific gravity 0.8 for a depth of 1m. Assume the atmospheric pressure is 1 bar. Find the gauge pressure and absolute pressure i) at the bottom of the container, ii) at the interface of water and mercury and iii) at the interface of an oil and mercury. ( i) At bottom Gauge Pressure = ________________N/m2 Absolute Pressure =_________________ N/m2 ii) At the interface of water and mercury Gauge Pressure =_______________ N/m2 Absolute pressure =_____________ N/m2 iii) At the interface of oil and mercury Gauge Pressure =_____________ N/m2 Absolute Pressure = _________________ N/m2
You are out at your grandparents property where they store rainwater in large tanks for later use. On hot sunny days, they release water from the hose at the bottom and water jets upwards into a fountain for the livestock to cool down. The tank is airtight currently to keep the water clean and is pressurized to a gauge pressure of p= 131.69kPa. You can assume standard atmospheric pressure 101.3 kPa, the density of water rhow = 1003kg/m3, acceleration due to gravity 9.81 m/s?, and the nozzle of the hose is in line with the bottom of the tank. Given the current depth of water in the tank is d = 9m, how high can the water freely rise as it exits the hose if friction is neglected? Provide your answer to 2 decimal places. d. h (m) =
The U tube differential manometer is connected between two pipes, with the specific gravity of liquid in pipe A & in pipe B is 0.84 and 0.63 respectively as shown in the figure, h;= 104 cm, hz = 28 cm, mercury level difference hg = 16 cm. Find the difference in pressure between the pipes A & B in kPa. (ENTER ONLY THE VALUE IN THE BOXES BY REFERRING THE UNIT GIVEN IN BRACKET. ALSO UPLOAD YOUR HAND WRITTEN ANSWERS IN THE LINK PROVIDED) h2 hi hg The difference in pressure between pipes A &B (in kPa)
In Fig.the tank contains water and immiscibleoil at 20 ° C. What is h in cm if the density of the oil is898 kg/m 3 ?
Two pipes A & B carries an oil of specific gravities 0.9 & 1.2 respectively. The center of the pipe A is 65 cm above the pipe B. The height of oil in right limb is 35 cm. Also, the mercury level difference is found in right limb as 50 cm. Find the pressure difference between these two pipes in kPa. Also find the pressure equivalent in water head in mm. -The difference of pressure between two pipes (PA-PB) (Unit is in kPa) = -Equivalent to Water head in mm =
1. In the benzene plant, the pressure drop at some point of a pipeline in which benzene is passing through is measured with a U-tube manometer (Rm,1) as 10 cm (1st situation). The manometer fluid is carbon tetrachloride (CC14). Then, in order to avoid CC14 poisoning, it is decided to add a layer of water to both arms of manometer (2nd situation). So, 4 cm of water is added to the left arm and 8 cm of water is added to right arm. In this new situation, what will be the height difference of manometer fluid (CC14) between the arms of the manometer (Rm,2)? Data: pbenzene=876 kg/m³, pwater=997 kg/m², pccCI4=1587 kg/m³ Benzene Flow Benzene Flow "wright=8cm Rm,1 Rm2 =4cm[ 1 st Situation: Before adding water to manometer's arms 2 nd Situation: After adding water to manometer's arms
The tank of an air compressor has a volume of 2m3 and is filled with air at a temperature of 40 degrees C. If agauge pressure on the tank reads 7.5 bars,what is themass of the air in the tank?
Figure shows a gage for very low pressures, inventedin 1874 by Herbert McLeod. ( a ) Can you deduce,from the fi gure, how it works? ( b ) If not, read about it andexplain it to the class.