You are out at your grandparents property where they store rainwater in large tanks for later use.On hot sunny days, they release water from the hose at the bottom and water jets upwards into a fountain for the livestock to cool down. The tank is airtight currently to keep the water clean and is pressurized to a gauge pressure ofp= 131.69kPa. You can assume standard atmospheric pressure 101.3 kPa, the density of water rhow = 1003kg/m3, acceleration due to gravity 9.81 m/s?, and the nozzle of the hose is in line with the bottom of the tank.Given the current depth of water in the tank is d = 9m, how high can the water freely rise as it exits the hose if friction is neglected?Provide your answer to 2 decimal places.d.h (m) =

Answered: Image /qna-images/answer/59ea924a-4afe-4ed6-8f82-7413c378d9bd.jpg

You are out at your grandparents property where they store rainwater in large tanks for later use. On hot sunny days, they release water from the hose at the bottom and water jets upwards into a fountain for the livestock to cool down. The tank is airtight currently to keep the water clean and is pressurized to a gauge pressure of 131.69kPa. You can assume standard atmospheric pressure 101.3 kPa, the density of water rhou = 1003kg/m3, acceleration due to gravity 9.81 m/s, and the nozzle of the hose is in line with the bottom of the tank. Given the current depth of water in the tank is d = 9m, how high can the water freely rise as it exits the hose if friction is neglected? Provide your answer to 2 decimal places. d h (m) =

You are out at your grandparents property where they store rainwater in large tanks for later use. On hot sunny days, they release water from the hose at the bottom and water jets upwards into a fountain for the livestock to cool down. The tank is airtight currently to keep the water clean and is pressurized to a gauge pressure of 131.69kPa. You can assume standard atmospheric pressure 101.3 kPa, the density of water rhou = 1003kg/m3, acceleration due to gravity 9.81 m/s, and the nozzle of the hose is in line with the bottom of the tank. Given the current depth of water in the tank is d = 9m, how high can the water freely rise as it exits the hose if friction is neglected? Provide your answer to 2 decimal places. d h (m) =

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The water in a tank is pressurized by air, and the pressure is measured by a multifluid manometer as shown in the Figure. The elevation differences are , , and . The density of water, oil, and mercury are , , , respectively. The gravitational acceleration is . (3) Calculate the gage pressure of the air in the tank_________kPa
If 100 ft3 of atmospheric air at zero Fahrenheit temperature are compressed to a volume of 1 ft3 at a temperature of 25 0F, what will be the pressure of the air in psi?
Please make it short and simple.
Some people experience nose bleeding and some others experience shortness of breath at high elevations. What are the reasons for this? Check All That Apply The pressure is lower at higher elevations. As a result, the difference between the blood pressure in the veins and the air pressure outside Increases. This pressure Imbalance may cause some thin-walled velns such as the ones in the nose to burst, causing bleeding. The shortness of breath is caused by the exhaustion of reaching high altitudes. The shortness of breath is caused by the lower r density at higher elevations and thus lower amount of oxygen per unit volume. Climbing high altitudes often involves trekking through rough terrain. Therefore, nose bleeding and shortness of breath occur due to fatigue.
3. The reading of an automobile gage is proportional to the gage pressure at the bottom of the tank as shown. The tank is 32 cm deep. Unit weight of gasoline is 6670 N/m³ and that of air is 11.8 N/m³. Unit weight of water is 9790 N/m³. Vent Air Gasoline Water a. Determine the gage reading when the tank is full of gasoline. b. How many cm of air remains at the top when the gage indicates full and the tank is contaminated with 3 cm of water? c. Determine the pressure at the interface of the gasoline and water when the gage indicates full.
In a tank with a height of 1 meter, open to the atmosphere at the top, there are two immiscible liquids (which do not mix) and whose densities are 13,600 kg/m3 and 750 kg/m3, respectively. The tank is completely full and each liquid occupies half of the container. If the atmospheric pressure of the place is 105 Pa, at what depth, measured from the top of the tank, is the value of the gauge pressure equal to half the value of the atmospheric pressure of the place? Consider that the gravitational acceleration of the place is 9.8 m/s2? a) 84.76 cmb) 34.75 cmc) 50.00 cmd) 37.51 cm
Determine the pressure in kPa at the following points: Point 1 Point 2 Point A Fluid from Point 1 to Point 2 is mercury (Hg) with Specific Gravity of 13.6. Fluid from Point 2 to Point A is water (H2O).
The speicfic gravity of a liquid is 0.75. what height of that liquid is needed to provide a pressure difference of 200 kPa?
if air is at pressure of 2200 lb/ft^3, and at a temperature of 800°R, what is the specific volume?
PROBLEM 4: The basic barometer can be used to measure the height of a building. If the barometric readings at the top and at the bottom of a building are 29.7” and 28.7” Hg, respectively, determine the height of the building in feet. Assume an average air density of 0.0023 slug/ft3 (1 slug = 32.174 lb) and SG of Hg = 13.55.
Q7 A water manometer is used to measure the pressure in a gas main. The graduated scale reads 260 mm in one limb and 146 mm in the other. Atmospheric pressure is normal. Determine the following (a) the gas pressure in kPa (gauge) (b) the absolute gas pressure
A pump is cavitating at its inlet (i.e., on the suction side). The fluid is water at 120°F. The atmosphericpressure is 0.9 bar. What is the gage pressure of the water in units of kPa?