A vessel is pressurised at A. The ends of the vessel are shut with two-disc plates connected by the shaft BC. The internal gauge pressure is 6.8 MPa. The Young's modulus is 210 GPa, the inner radius of the vessel is 80 cm, and the wall thickness is 12 mm.

A vessel is pressurised at A. The ends of the vessel are shut with two-disc plates connected by the shaft BC. The internal gauge pressure is 6.8 MPa. The Young's modulus is 210 GPa, the inner radius of the vessel is 80 cm, and the wall thickness is 12 mm.

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter9: Moments And Products Of Inertia Of Areas

Section: Chapter Questions

Problem 9.94RP: The properties of the unequal angle section are Ix=80.9in.4,Iy=38.8in.4, and Iu=21.3in.4. Determine...

See similar textbooks

Related questions

Q: A cylinder has an internal diameter of 230 mm, has walls 5 mm thick and is I m long. It is found to…

A: Given data as per question Internal diameter of cylinder=230 mm Thickness of wall =5 mm Length =1 m…

Q: For a thin-walled cylindrical pressure vessel with hemispherical end caps, constructed of uniform…

Q: The pressure vessel shown.above is made from 4 mm thick steel plate. A pressure of 3.5 MN/m² is…

Q: A 540-N uniform rectangular sign 4.00 m wide and 3.00 m high is suspended from a horizontal,…

A: Part aCentre of gravity of rectangular sign board lies at6-2= 4mCentre of gravity of rod lies at6-3=…

Q: A cylindrical pressure vessel of radius r = 10.2 in is filled with a gas at a pressure of 455.0 psi…

A: Given Radius, r = 10.2 in Cap radius, R = 22 in Pressure, P = 455 psi Weight, W = 31…

Q: Q3/ An open belt drive connected two parallel shafts 1.2 m apart. The driving and driven shafts…

Q: A steel tank has an inside diameter of 3 m and 6 m high contains gasoline with a relative density of…

Q: You have the thin walled pressure vessel shown. Given the dimensions of the pressure vessel, will…

Q: cylindrical vessel of 1 m diameter and 3 m long is made of steel 12 mm thick and filled with water…

Q: A cylinder is made of steel plate is intended to be used as a container for compressed air. The…

Q: A rod as shown below is subjected to a tensile force F = 1.1 kN acting at the centroid of two faces.…

A: As the rod is subjected to tensile force, there will be tensile stress on the rod. Tensile stress…

Q: 11. A boiler shell 200 cm diameter and plate thickness 1.5 cm is subjected to internal pressure of…

Q: thickness 8 mm and both diameter of 12 mm. Determine (a) bearing stress V between strut and pin (b)…

Q: An open belt drive connected two parallel shafts 1.2 m apart. The driving and driven shafts rotate…

A: Here Given that L=1.2m= distance between driving pulley and driven pulley N1=350 rpm= rotational…

Q: The inner diameter of a cylindrical pressure vessel is 400 mm. When subject to pressure, the hoop…

Q: Member AB (helical spring) and Member AC (axial rod) are carrying a weight at point A. Member AB has…

Q: The length of a cylindrical pressure vessel is 4 m. The ends are closed with flat plates. When…

Q: Consider the vessel in which the wall thickness of the cylindrical and hemispherical portions has a…

Q: The BC and DE bars in the figure are made of steel (Eç = 200GPA), each of which has a width of 12 mm…

Q: 15°C to 40°C and it is free to expand. The bar wil A steel bar of 5m induce :

A: Given data : Length (L)=5 mmCoefficient of thermal expansion (α)=1.2×10-5Initial temperature…

Q: A pipe carrying steam at 3.5 MPa has an outside diameter of 450 mm and a wall thickness of 10 mm. A…

Q: A cylindrical vessel whose ends are closed by means of rigid flange plate is made of steel plate 3…

A: Write the given information.

Q: A spherical shell of volume mass density p, thickness t and radius R(R>>t) is placed concentrically…

Q: The length of a cylindrical pressure vessel is 4 m. The ends are closed with flat plates. When…

Q: Q6. A hydro-cylinder with an inner diameter of D=200 mm has the oil pressure isp =1 N/mm. The…

A: GivenD=200mmP=1N/mm2n=8boltsK=kbkb+km=0.4

Q: Compound axial member ABC has a uniform diameter of d = 1.0 in. Segment (1) is an aluminum [E1 =…

Q: 1. The circular tube shown in Fig. 1 is subjected to a uniform internal pressure P; and external…

A: 1 2

Q: A cylinder with a 0.30-m inner diameter and a 0.40-m outer diameter is internally pressurized to 100…

A: Given Diameter, d = 0.3 m Thickness, t = 0.20 - 0.15 = 0.05 m

Q: 1. A cylinder tankhas a maximum load of 2600 kg while the pressure is 2600 kpa. If the ultimate…

A: Dear student, we are suppose to solve only one question. Please post other question as a separate…

Q: cylindrical tank with a spherical end-cap has an outer radius of 2.54m and a wall kness of 53 mm. if…

Q: A truck bed cargo shell has a rectangular glass window that is held up by two strut pistons. Assume…

Q: A cylinder is made of steel palte is intended to be used as a container for compressed air. The…

Q: The cylindrical steel tank shown is 3.5m in diameter 5m high and filled with brine solution. Brine…

A: Given data ρ=1198 kg/m3t=12.5 mm

Q: B: A 30 m long vessel with cross section shown in Fig.4 is to carry a load of 6006 kN. If the free…

Q: A disk of SBR elastomer 3.0 cm in diameter 0.5 cmthick is used as a cushioning surface between two…

A: Write the given data with suitable variables: d=3 cm=30 mm10 mm1 cmt=0.5 cm=5 mmP=100 N

Q: Q4//Determine the required vertical force F to be applied at the lower edge to open the square gate…

A: Area= 2.8×2.8 =7.84m2 Location of CG(y) =1.8+2.8sin45/2 =2.78m…

Q: The pressure vessel shown.above is made from 2 mm thick steel plate. A pressure of 1 MN/m is applied…

Q: 6 m A cylindrical pressure vessel contains a gas at a pressure of 6.0 MPa. The cylinder, which has…

Q: A circular plate with simply supported edges subjected to a uniform pressure of P=10 KPa, as shown…

A: Given dataPressure = P = 10 kPaPlate thickness = h = 19mmRadius of plate = 1.340 mmYoung's Modulus =…

Q: A rigid horizontal bar of negligible mass is connected to two rods as shown. If the system is…

Q: (a) A thin steel cylinder 1.3 m long is subjected to internal pressure; the change in volume owing…

Q: A gas is stored in a cylindrical tank of inner radius 7 m and wall thickness 50 mm. The gage…

A: Given, Radius of cylinder = R = 7 m = 7000 mm Wall thickness = t = 50 mm Gage pressure of the gas =…

Q: Q. An air vessel, which is made of steel in 2m long. It has an external diameter 40 cm and is 2cm…

Q: Consider the vessel in which the wall thickness of the cylindrical and hemispherical portions has a…

Q: A 150mm* 50mm* 25mm steel block is subjected to a hydrostatic pressure of 10MPa. The Young's modulus…

A: Given:V=150mm*50mm*25mmP=10 MPaE=100GPaμ=0.1

Q: A cylindrical pressure vessel of radius r = 10.2 in is filled with a gas at a pressure of 455.0 psi…

Q: A steel cylindrical vessel is subjected to a pressure of 21 MPa. Its outer diameter is 4.6 m and its…

Q: A drill string is composed of 5,100 ft of 4½-in. drill pipe with a unit weight of 18 lbf/ft, 300 ft…

A: here, as we know the specific gravity of steel, =7.5 So, the Buoyancy factor, (BF);…

Q: If a copper ring with an outer diameter of 2000 mm and a thickness of 20 mm and a steel ring with an…

A: Given,

Concept explainers

Pressure Vessels

The term pressure vessel refers to a closed container that contains gas or liquid at a different pressure than environment pressure. The pressure vessels have a wide scale of applications in our day-to-day lives and other industrial places. Some common examples of pressure vessels are gas cylinders, autoclaves, compressor vessels, etc.

Question

A vessel is pressurised at A. The ends of the vessel are shut with two-disc plates
connected by the shaft BC. The internal gauge pressure is 6.8 MPa. The Young's
modulus is 210 GPa, the inner radius of the vessel is 80 cm, and the wall thickness
is 12 mm.
1. Determine the change in the diameter of the vessel.
80 cm
12 mm
12 cm
C

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Step by step

Solved in 3 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A steel pipe has an inside diameter of d = 250 mm and an outside diameter of D = 268 mm. The length of the pipe is L = 6.0 m. The changes in dimension caused by an increase in temperature of 80°C for the: Outside diameter - Blank 1 mm Inside diameter - Blank 2 mm Lenght - Blank 3 mm Note: All answer must be round off up to 3 decimal places.
A gas is stored in a cylindrical tank of inner radius 7 m and wall thickness 50 mm. The gage pressure of the gas is 2 MPa. The maximum shear stress (in MPa) in the wall is
Find the thickness of a metal needed of the semi-spherical end of cylinder vessel 0.70 meter in diameter to an internal pressure of 2.70 N/mm2. The material is mild steel and tensile is 69 N/mm2
Find the ox value for the plate as shown below, where b1=d2%=D16 mm, d1=70 mm,b2%=90mm. (ENTER ONLY THE VALUES IN THE BOXES BY REFERING THE UNITS GIVEN IN THE BRACKET) b1 b2 d2 d1
The final answer is Mb= 4350 Ib-ft
A thick walled cylinder has an inner radius, a, of 95 mm and an outer radius, b, equal to 1.4a. The cylinder is subjected to an internal pressure, P, of 8 N/mm². Determine the circumferential stress at the inner radius of the cylinder. Give your answer in N/mm².
A cylinder has an internal diameter of 230 mm, has walls 5 mm thick and is 1 m long. It is found to change in internal volume by 12.0 x 10-6 m3 when filled with a liquid at a pressure p. If E = 200GN/m2 and v = 0.25, and assuming rigid end plates, determine the values of hoop stress
For an art project, a Student uelds 3 COpper "fins" to a steal tune to form a base for on exhibit. Giren tha6 the Pipe nas a thicknes3 Of lOmm and the fins noe a thickness of 5mm, each, what Is the center of gravty of the overall base. * Densitt of copper =8949 kg/m? • densityof Steel=7890 KA Im? 50mm 100 mm a 00mm 120
A weight of 300 N is suspended below a horizontal beam by means of two wires at angles of 30 ° and 45 ° to the horizontal as shown below. The Young's modulus of the both wires is E=200,000 MN/m². The cross sectional area of the left wire is 40mm2 while for the right wire it is 50mm². Select the correct answer for the direct stress in the left wire. Give your answer in N/mm2 to three decimal places. Assume tension to be positive and compression negative. 30° 45° (Not to scale) 2m 300 N O 6.725 O 5.490 O 4.392 O 5.380
1. A hydraulic system is used to apply a force in an external fixation device to hold broken ends. The piston of this hydraulic ram is 30 cm in diameter and the water pressure (shaded portion of the sketch) is 3 MN/m² as shown in Figure QI.1. 3 MN/m 30 cm 4 cm Figure QI.I Hydraulic system Determine: 1.1. The stress in the piston rod which has dimeter of 4 cm 1.2. The elongation of the 2 m long piston rod. Take Young's modulus as E- 200 GN/m²
A closed thin walled cylindrical vessel has a diameter D of 780 mm, a wall thickness t of 3.5 mm and length L of 950 mm. It is subject to an internal pressure P of 50.0 MPa. Assuming that Youngs modulus is 200 GN/m² and Poisson's ratio is 0.3, calculate the change in length of the vessel due to the internal pressure. Give your answer in mm to 3 significant figures. 00 P D 00 $ de OL 4
QUESTION 1. A hydrazine tank, designed by Orbital Propulsion Center, is made of T16A14V STA (3.7164.7) titanium alloy is shown in the figure. a. The length of the tank is 890 mm and its volume is 176.5 liters. Calculate the radius of the tank. b. Determine the tank thickness, t such that the tank resists the proof pressure of 36.9 Bar without permanent deformation and the burst pressure of 49.2 Bar without fracture. c. Under the operational conditions (MEOP), determine the absolute maximum shear stress that occurs on the tank. http://www.space-propulsion.com/spacecraft-propulsion/hydrazine-tanks/index.html Surface Tension Propellant Tank OST 33/0 Net Volume Range 176.5 Litres Propellants Hydrazine (N,H) Spherical with a gylindrical Intersection Geometrical Shape Maximum Expected Operating Pressure (MEOP) 24.63 bar Proof Pressure (1.5 x MEOP) 36.95 bar Burst Pressure (2.0 x MEOP) 49.26 bar Interface Fixation 4 Suspension Trunnions Materials - Pressure Vessel TIGAIAV STA (3.7164.7) -…