A Tachometer is set up at an intermediate point on a survey line PQ and the following observationswere made on a vertically held staff.Staff intercept1.235 m1.115 mAxial hair readings2.445 m1.335 mStaff stationVertical angle15° 20 ' 50"12° 40 ' 10 "i) Compute length of the line PQ.2.5ii) Compute R.L of Q, if R.L of P is 189.66 m2.5

i) Introduction : Tacheometry's main principle is based on the isosceles triangle's basic principle.…

A Tachometer is set up at an intermediate point on a survey line PQ and the following obser were made on a vertically held staff. Staff station Vertical angle 15° 20 ' 50" 12° 40 ' 10 ' Compute length of the line PQ. Staff intercept 1.235 m Axial hair readings 2.445 m 1.335 m Q 1.115 m i)

A Tachometer is set up at an intermediate point on a survey line PQ and the following obser were made on a vertically held staff. Staff station Vertical angle 15° 20 ' 50" 12° 40 ' 10 ' Compute length of the line PQ. Staff intercept 1.235 m Axial hair readings 2.445 m 1.335 m Q 1.115 m i)

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Question: 1 To determine the elevation of station A, the following observation were taken, the rod held vertically. The instrument fitted with Anallatic lens and value of constant was 100. Inst. Station Height of instrument Staff Station Vertical angle Staff Reading Remarks O 1.440 B.M - 5o40’ 1.332 1.896 2.460 R.L of BM = 158.205 m B 1.440 C.P +8o 20’ 0.780 1.263 1.746 A 1.380 C.P -6o 24’ 1.158 1.617 2.076 subject: Engneering surveyin 1
Module 03- Coursework Activity 03 Complete the Differential Leveling Notes by providing data to the unknown quantities. STA FS BM1 TP1 TP2 BM2 BM3 TP3 BM4 BS 1.256 1.116 1.228 1.189 1.070 1.831 HI 1.886 1.527 2.246 2.017 2.656 2.765 ELEV 127.133
I need Answer of A only A. A tachometric surveying was conducted to obtain some readings forinaccessible points, where it was found that the multiplying and additiveconstants are 98 and 0.1, respectively. The instrument was setup at point C and the readings listed in the table were taken while the staff was held vertically. Calculate the horizontal distance between BM and station D. Also, calculate the reduced level of station D. Figure 1 shows a schematic view of the site.
a) In the process of taking a rod reading, one can eliminate parallax mathematically. Parallax is basically a systematic error. True False b) The page check in the field notes is a quality control measure to determine if the user satisfied 1st order class I leveling. True False C) The upper cross hair reading was 8.00 ft. The lower cross hair reading was 6.00 ft. The stadia constant was 100. The horizontal distance from the center of the level to the face of the level rod = 200.0 ft. True False
Two pegs A and B are driven in the ground at a distance of abour 120 m. A dumpy level is set up at station Q exactly mid-way between pegs A and B. The staff readings on peg A and B were found to be 3.513 m and 3.149 m. The instrument was then moved and set up at a point P beyond peg A, in line BA produced at a distance of 20 m from A. The staff readings on pegs A and B were 1.763 m and 0.847 m respectively. What is the true difference in elevation between the two points? With the level in the same position at P what rod readings on B should the line of sight is adjusted. Check these reading against the true difference in elevation previously SOLVE THE FOLLOWING PROBLEMS: Problem Sketch Solution Answer
Two pegs A and B are driven in the ground at a distance of abour 120 m. A dumpy level is set up at station Q exactly mid-way between pegs A and B. The staff readings on peg A and B were found to be 3.513 m and 3.149 m. The instrument was then moved and set up at a point P beyond peg A, in line BA produced at a distance of 20 m from A. The staff readings on pegs A and B were 1.763 m and 0.847 m respectively. What is the true difference in elevation between the two points? With the level in the same position at P what rod readings on B should the line of sight is adjusted. Check these reading against the true difference in elevation previously determined. a. Sketch b. Solution C. Answer
Q#15: The following is the data relative to observed stations made on vertically held staff with a tacheometer fitted with an anallactic lens. The constant of instrument was 100. Instrumen Height of axis Staff Stn. W.C.B Vertical Hair Readings Remarks t Stn Angle 2.56 A 12°25' 0°0' 2.88, 3.25, R.L of O = 3.62 230.25 B 60°45' +15°10' 2.83, 3.15, 3.47 Calculate the distance AB, and reduced levels of A and B. O Activate Windows
The following tacheometric observations were made from station A to stations 1 and 2. The height of the instrument above the ground was 1.52 m. Take stadia interval factor and constant as 100 and 0, respectively. If the staff was inclined by 1° to the vertical, solve for the following:a. Error in horizontal distance if the staff is inclined towards theinstrument for the line A-1. b. Error in the vertical distance if the staff is inclined away from theinstrument for the line A-2. c. If the elevation of point 1 is 115.673 m, determine the correctelevation of point 2.
Question 13 In a 3-wire Leveling, the mean reading for the backsights or foresights is computed as: O sum of the middle reading, upper reading, and lower reading divided by 3. O sum of the upper reading and lower reading divided by 2. sum of the upper reading and lower reading divided by 3. O sum of the middle reading, upper reading, and lower reading divided by 2.
Problem 8: The following are the results of the measurement of a survey line between two tripod heads, where the tape was allowed to Sag Line AB Slope Length Vertical Angle Temperature Tension 25.510m 6° 00' 20 °C 80 N The Tape weighted 0.25 N/m; had cross sectional Area of 3mm2 and was actually 30.005 m long at the time of measurements. Where the nominal length of the tape is 30.0 m Calculate the corrected horizontal length of the Line AB
3:14 م أنت الآن nt/1/CELS%202100%20Part%208%20%28C%29.pdf 4 /5 100% Q25. The length and angles obtained during surveying of a park with a 30 m tape is shown in the following Fig. 25. The tape used was 30 mm too long. 15 38 45 4.5 m 90 Fig. 25 i) Calculate the correct area of the park. 2.5 ii) Calculate the correct perimeter of the park. 2.5 Page 4 of 5 个 I
B. Double-Rodded Leveling 3. Complete differential level notes for the information shown and perform the customary arithmetic check. STATION BS HI FS STATION 1.722 BM1 127.378 m 1.722 ΤΡΙΗ 2.623 1.382 TP1L 2.789 1.522 TP2 H 3.089 0.899 TP2 L 3.214 0.714 ТРЗ Н 1.521 2.452 TP3 L 1.632 2.678 ТРА Н 2.333 1.113 TP4 L 2.589 1.523 TP5 H 0.667 2.877 TP5 L 0.986 2.543 3.521 BM2 3.214