A spherical gas-storage tank with an inside diameter of 29 ft is being constructed to store gas under an internal pressure of 218 psi. The tank will be constructed from structural steel that has a yield strength of 38 ksi. If a factor of safety of 3.0 with respect to the yield strength is required, determine the minimum wall thickness required for the spherical tank.

Q: A VERTICAL CYLINDRICAL STEEL STORAGE TANK HAS 30 M DIAMETER AND THE SAME IS FILLED UPTO A DEPTH OF…

A:

Q: 20m diameter spherical tank is to be used to store gas. The shell plating is 10 mm thick and the…

A: Given:- d=20mm t=10mm Maximum stress = 125MPa To find:- Maximum permissible gas pressure

Q: A cylindrical boiler with an outside diameter of 3.60 m and a wall thickness of 40 mm is made of a…

A:

Q: A circular aluminum alloy [E = 70 GPa; a = 22.5 x 10-6/°C; v = 0.33] pipe has an outside diameter of…

A:

Q: A polymer cylinder (2) is clamped between rigid heads by two steel bolts (1). The steel [E = 29,000…

A: To determine: normal stress in the polymer cylinder normal strain in the polymer cylinder normal…

Q: A circular aluminum alloy [E = 70 GPa; a = 22.5 x 10-6/°C; v = 0.33] pipe has an outside diameter of…

A: Given:Outside diameter of pipe, D=240 mmWall thickness=10 mmInside diameter of pipe, d=240-2×10…

Q: A spherical gas-storage tank with an inside diameter of 7.3m is being constructed to store gas under…

A:

Q: The internal diameter of a thin cylinder is 200 mm and it is subjected to internal pressure of 15…

A:

Q: A RECTANGULAR ALUMINUM BLOCK IS 40mm LONG IN THE Y DIRECTION, 20mm WIDE IN THE Z DIRECTION AND 25mm…

A: Given rectangular box subjected to triaxial loading,Length of the block, L = 40  m in…

Q: 1.41 Estimate the tensile strength required to prevent cracking in a concrete-like material that is…

A: Given Length L = 50 in initial temperature =100oF Final temperature = 0oF α=5×10-6/FoE=5×106psi To…

Q: An aluminum cylinder and a bronze cylinder are centered and secured between two rigid slabs by…

A:

Q: A spherical pressure vessel of 900 mm outer diameter is to be fabricated from a steel having an…

A:

Q: Determine the bulk modulus for the following material glass E, - 8 (10³) ksi : v- 0.26 Vg - 5556 ksi…

A:

Q: Steel railroad rails 10m long are laid with a clearance of 3mm at a temperature of 15oC. The modulus…

A:

Q: 6. The temperature of concrete for highways reaches 60C in summer, and in winter the temperature…

A:

Q: a. What is the maximum pressure that the form needs to withstand if the wall is to be 114 mm thick,…

A:

Q: 3. A steel bolt through a 31-in long aluminum tube has the nut turned on until it just touches the…

A:

Q: eam, 80 mm wi nly from zero at

A:

Q: 7. A solid aluminum cylinder is placed within an ASTM A501 steel tube as shown. Compute the stresses…

A: Given Data: The diameter of the solid aluminum cylinder is d1=3 in. The diameter of the steel tube…

Q: Compute the safe wall thickness in mm of a 60-in steel tank with an internal pressure of 10 MPa. The…

A:

Q: Find out the working stress if a steel column carries a load of 1.6 MN with a factor of safety of 5.…

A: Given, Load = 1.6 MN  Factor of safety FOS = 5  Ultimate stress = 472 MN/m2  Find, Working stress

Q: A) A specimen of alloy having the following engineering stresses produces the corresponding plastic…

A: Given above table and we have to find the engineering stress which produces engineering strain of…

Q: Problem Two: Consider the cross-sectional shown in the figure below. The cross-section is reinforced…

A:

Q: a concrete beam simply supported at both ends 300 × 600mm it stressed by 3 cables of 700 mm each…

A: given data: ps =1200n/mm2                     e=100mm, ec =30,000

Q: The development length (in mm) in compression for a 18 mm diameter deformed bar of grade Fe415…

A:

Q: cuba tank is being designed for an internal pressure of 2,655 psi with a factor of safety of 2.0…

A: given- a scuba tank having internal pressure of 2655psi with factor of safety 2. required-to find…

Q: A spherical gas-storage tank with an inside diameter of 9.7 m is being constructed to store gas…

A:

Q: For a given elextic material, the Eastic Modulus E is 210 GPa and its Poission's Ratio is 0.27. What…

A:

Q: Steel railroad rails 10 m long are laid with end-to-end clearance of 3 mm at a temperature of 15°C.…

A:

Q: Question 7: Given a 1050 HR steel, estimate (a) the rotating-beam endurance limit at 106 cycles. (b)…

A: Given data: 1050 HR steel

Q: A polymer cylinder (2) is clamped between rigid heads by two steel bolts (1). The steel (E = 29,000…

A:

Q: A rectangular nylon [E = 8 GPa; ?= 0.35; ?= 24 x107 P/°C] plate has a circular hole in its center.…

A: Young's modulus, E = 8 GPaThermal coefficient, Intial temperature = 15CFinal temperature =…

Q: A circular aluminum alloy [E = 70 GPa; a = 22.5 x 10-6/°C; v = 0.33] pipe has an outside diameter of…

A: Given: Modulus of elasticity =E  Coefficient of thermal expansion Outside diameter Thickness  Length…

Q: 1) The plastic polymer cylindrical pipe is carrying flowing water at 0.5 N/mm pressure. The pipe has…

A:

Q: solution

A:

Q: A circular aluminum alloy [E = 70 GPa; a = 22.5 x 10-6/°C; v = 0.33] pipe has an outside diameter of…

A:

Q: A composite column is formed by placing a steel bar, 20 mm in diameter and 200 mm long, inside an…

A: Given:- The diameter of the steel bar = 20 mm  The length of the steel bar = 200 mm  The internal…

Q: Find out the working stress if a steel column carries a load of 1.6 MN with a factor of safety of 5.…

A: Given data:- The given Ultimate stress of steel, =472 MN/M2 The given factor of safety, =5 The given…

Q: A rectangular concrete beam, 360mm deep and 200mm wide, is prestressed by means of fifteen 5mm…

A: Note: The given depth is 360mm but the correct answer is coming if we use 300mm. In this solution…

Storm Sewers and Detention

The storm drains system transports rainwater or stormwater and other runoff from roads, parking lots, and roof downpipes directly to nearby creeks, rivers, or the sea without any treatment.