A metal bar with length L = 0.40 m ,mass m = 200 gram, and resistanceR = 10 N is placed on frictionless metal rails that are inclined at an angleØ = 45° above the horizontal. The rails have negligible resistance. A uniformmagnetic field of magnitude B = 1.40 T is directed upward as shown in Figure.The bar is released from rest and slides down the rails. After the terminal speed(constant speed) has been reached, at what rate is electrical energy beingconverted to thermal energy in the resistance of the bar? (g = 10 m/s²).A) 26.01 W B) 72.70 W C) 32.55 W D) 122.86 W E) 127.55 W

Length of Bar= 0.4 m Mass= 0.2 Kg Resistance = 10 Ohms Magnetic Field= 1.4 T g= 10 m/s^2

A metal bar with length L = 0.40 m „mass m = 200 gram, and resistance R = 10 N is placed on frictionl ess metal rails that are indined at an angle Ø = 45° above the horizontal. The rails have negligible resistance. A uniform magnetic field of magnitude B = 1.40 T is drected upward as shown in Figure. The bar is released from rest and slides down the rails. After the terminal speed (constant speed) has been reached, at what rate is electrical energy being converted to thermal energy in the resi stance of the bar? (g = 10 m/s²).

A metal bar with length L = 0.40 m „mass m = 200 gram, and resistance R = 10 N is placed on frictionl ess metal rails that are indined at an angle Ø = 45° above the horizontal. The rails have negligible resistance. A uniform magnetic field of magnitude B = 1.40 T is drected upward as shown in Figure. The bar is released from rest and slides down the rails. After the terminal speed (constant speed) has been reached, at what rate is electrical energy being converted to thermal energy in the resi stance of the bar? (g = 10 m/s²).

Principles of Physics: A Calculus-Based Text

5th Edition

ISBN:9781133104261

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter23: Faraday’s Law And Inductance

Section: Chapter Questions

Problem 24P

See similar textbooks

Similar questions

How many turns must be wound on a flat, circular coil of radius 20 cm in order to produce a magnetic field of magnitude 4.0105 T at the center of the coil when the current through it is 0.85 A?
A particle moving downward at a speed of 6.0106 m/s enters a uniform magnetic field that is horizontal and directed from east to west. (a) If the particle is deflected initially to the north in a circular arc, is its charge positive or negative? (b) If B = 0.25 T and the charge-to-mass ratio (q/m) of the particle is 40107 C/kg. what is ±e radius at the path? (c) What is the speed of the particle after c has moved in the field for 1.0105s ? for 2.0s?
An election moves through a uniform electric field E = (2.50i + 5.00j) V/m and a uniform magnetic field B = 0.400k T. Determine the acceleration of the electron when it has a velocity v = 10.0i m/s.
A circular loop of wire with a radius of 4.0 cm is in a uniform magnetic field of magnitude 0.060 T. The plane of the loop is perpendicular to the direction of the magnetic field. In a time interval of 0.50 s, the magnetic field changes to the opposite direction with a magnitude of 0.040 T. What is the magnitude of the average emf induced in the loop? (a) 0.20 V (b) 0.025 V (c) 5.0 mV (d) 1.0 mV (e) 0.20 mV
A square loop whose sides are 6.0-cm long is made with copper wire of radius 1.0 mm. If a magnetic field perpendicular to the loop is changing at a rate of 5.0 mT/s, what is the current in the loop?
A conductor slides along two parallel rails, as shown below. The magnetic field of 3.80 T points into the page and the distance between two horizontal rails is L = 5.00 cm. The moving conductor induces an emf of 1.65 V. What is the speed of the moving conductor? [Answer in unit m/s with 3 sig digits, but do not enter units with your answer) x x x x x x x x x x x x x x x X x xX x x X X x x xx x X X X x x x x x X X Your Answer: Your Answer
In the figure, a conducting rod of length LLL = 35.0 cm moves in a magnetic field B⃗ B→\vec{B} of magnitude 0.530 T directed into the plane of the figure. The rod moves with speed v = 7.00 m/s in the direction shown. What is the magnitude VbaVbaV_ba of the potential difference between the ends of the rod? Express your answer in volts to at least three significant figures.
A very long, rectangular loop of wire can slide without fnction on a horizontal surface. Initially the loop has part of its area in a region of uniform magnetic field that has magnitude B=3.10 T and is perpendicular to the plane of the loop.The loop has dimensions 4.00 cm by 60.0 cm, mass 260 g, and resistance R=6.00×10−3Ω The loop is initially at rest, then a constant force Fext = 0.180 N is applied to the loop to pull it out of the field (Figure 1).. i ) What is the acceleration of the loop when v = 3.00 cm/s? a = ---------m/s^2
A straight conductor of length l moves with an acceleration a = 0.1 ms−2 at right angles to amagnetic field of uniform strength B = 10 T. The e.m.f. between the ends of the conductorincreased from 0 to 5 V during the first 20 s after the beginning of motion. Calculate l.
A 13-cm length of wire is held along an east-west direction and moved horizontally to the north with a speed of 2.2 m/s in a region where the magnetic field of the earth is 55 micro-T directed 28° below the horizontal. What is the magnitude of the potential difference between the ends of the wire? Write your answer in micro-volts.
In the figure (Figure 1) a conducting rod of length L = 31.0 cm moves in a magnetic field B of magnitude 0.480 T directed into the plane of the figure. The rod mc with speed v = 5.30 m/s in the direction shown. Figure X X X X X b X χαχ X X 1 of 1 X X X What is the potential difference between the ends of the rod? Express your answer in volts. NO | ΑΣΦΑ ▼ V = Submit Part B Which point, a or b, is at higher potential? b Submit Part C Request Answer E = Submit Request Answer When the charges in the rod are in equilibrium, what is the magnitude of the electric field with Express your answer in volts per meter. VG ΑΣΦΑ V Request Answer V/m
A small object with mass 4.00x10-6 kg and positive charge 6.00x10-6 C enters a region where the magnetic field is uniform and has magnitude 2.00 T and direction into the page. Just before the object enters the field region its speed is 800 m/s. What is its speed when it reaches point P on its semicular path in the field region?