A machine costing $215,000 with a four-year life and an estimated $19,000 salvage value is installed in Luther Company’s factory on January 1. The factory manager estimates the machine will produce 490,000 units of product during its life. It actually produces the following units: 122,700 in Year 1, 124,200 in Year 2, 121,000 in Year 3, 132,100 in Year 4. The total number of units produced by the end of Year 4 exceeds the original estimate—this difference was not predicted. Note: The machine cannot be depreciated below its estimated salvage value. Required: Compute depreciation for each year (and total depreciation of all years combined) for the machine under each depreciation method. (Round your per unit depreciation to 2 decimal places. Round your answers to the nearest whole dollar.)
Q: Question 13 What is the Job 1's cost per unit? Question 13 options: $11 $10 $20 $1...
A: Materials Cost=Units of materials requisitioned×Cost per unitDirect Labor Cots=Direct Labor hours of...
Q: Maximum Bank has analyzed the accounts receivable of Scientific Software, Inc. The bank has chosen e...
A: In this question, we have to find out the maximum amount that the bank will lend In the next questio...
Q: Maxim Company acquired 40,000 ordinary shares on October Problem 16-12 (AICPA Adapted) 1 for P6,600,...
A: Ordinary shares, often known as common shares, are publicly traded securities. In most circumstances...
Q: Accountancy Company acquired 75% of the outstanding shares of Finance Company for P900,000. Book val...
A: NET INCOME OF PARENT 350000 + DIVIDEND 42000 +SHARE OF NET INCOME OF SUBSIDARY (REFER WORKING ...
Q: On January 1, 2018, Apple Company sold delivery equipment costing P1,000,000 with accumulated deprec...
A: Note means an instrument acknowledging as debt due from one party to another party. It carry defined...
Q: May Company has ending finished goods inventory of P40,000.00, beginning finished goods inventory P5...
A: Solution.. Ending finished goods inventory = P40,000 Beginning Finished goods inventory = P55,000...
Q: On October 1, A company acquired for cash all the outstanding ordinary shares of B company. Both com...
A: In case one company overtake the assets and liabilities of another company , then accounting for am...
Q: , with a salvage value of P4,000. The annual operating cost was P18,000. Determine the annual cost o...
A: Given as, Cost of asset= P1,00,000, Useful life = 15 years, Salvage value= P4,000, Annual operating ...
Q: A. Luther was admitted to the Evergreen Partnership as a 25% partner. He contributed land with a fai...
A: A) Luther Tax Basis Partner tax basis is = Net value of the partner's contribution + share of liabil...
Q: Your rich uncle named you beneficiary of his life insurance policy. The insurance company gives you ...
A: Amount today = 100,000 Annual payment = P12,000 Period = 12 Years
Q: On January 1, 2018, Apple Company sold delivery equipment costing P1,000,000 with accumulated deprec...
A: Gain (loss) on sale of delivery equipment in 2018 = Present value of the Note - Net carrying value o...
Q: Choose the journal entry 4. Record the cost of goods manufactured Dr Factory overhead; Cr Finish...
A: The good produced is transferred through different departments like material inventory, work in proc...
Q: On January 1, 2020, Blue Company purchased P500,000 8% bonds for P475,126 (including broker's commis...
A: Discount on company’s bonds = 500000-475126= 24874 interest =8% x 500000 = 40000 interest income at...
Q: Required information [The following information applies to the questions displayed below.] Forten Co...
A:
Q: bonds were issued, the prevailing market interest rate for similar debt without the conversion optio...
A: Financial statements refer to the final documents prepared at the end of the year by the business re...
Q: Briefly explain any TWO (2) similarities between job order and process costing
A: Job order costing and process costing are two systems of cost accounting. In job order costing syste...
Q: ompany produces a single product. They have recently received the results of a market survey that in...
A: In Marginal Costing we get contribution margin by deduct...
Q: 7. The entry to record the purchase of materials using a job costing system would include Ocredit to...
A: The question is based on the concept of Cost Accounting. Job costing is used in manufacturing entity...
Q: In June 2008, when gasoline prices were at an all-time high (more than $2.95 per gallon), Chrysler M...
A: In this question, In the first point, we will find out that indifference point in miles over three...
Q: CHAS, Inc. is engaged in the sale of parts for electric gate motors for residential and commercial g...
A: Accounts Payable seems to be the title used whenever a company purchases goods on credit and must pa...
Q: Summarized data for Walrus Co. for its first year of operations are: Sales (110,000 units) $6,600,00...
A: Variable Costing - In this costing method, variable costs are considered while preparing the cost of...
Q: Answers: 1. Purchases, 2. Beginning inventory, Ending inventory, ; Cost of goods sold,
A: Solution Formula used Goods available for sale =beginning inventory + purchases Cost ...
Q: 2021?
A: Financial assets at fair value through profit or loss, including cost of P500,000 of YSA Inc. 2,500,...
Q: On July 1, 2021 ABC issued bonds dated March 1, 2021 and for their principal (maturity value) of 100...
A: Interest Expense=Face Value of Bond×Interest Rate
Q: May Company has ending finished goods inventory of P40,000.00, beginning finished goods inventory P5...
A: Solution.. Cost of goods manufactured = P120,000 Beginning finished goods inventory = P55,000 En...
Q: Depreciation OMR 12000 Net Profit OMR 148000 The following accounts decreased during 2020: Accounts ...
A: Introduction: Statement of cash flows: All cash in and out flows are shown in statement of cash flow...
Q: On January 1, 2020, Myeoong Company granted 60,000 share options to employees. The share options wil...
A: Upon exercise of equity options on December 31, 2023, Following journal entry will be passed: Par...
Q: Chapter 10: Assessing and Responding to Fraud Risks Assessing the risk of fraud in a financial sta...
A: Brainstorming seems to be a way of generating solutions and exchanging information for the purpose o...
Q: Using the data given below, compute for the total amount of items that meet the definition of financ...
A: Financial Assets means: Cash Investment in Equity instruments Right to receive cash or any financia...
Q: LA Corporation donated P1,000,000 to a government agency which was created to generate profit for th...
A: Solution under the law on donor's tax , when a donation is made to a government agency conducted for...
Q: Discuss the basic difference between absorption costing and variable costing from a product-costing ...
A: It is a technique of costing wherein: All variable manufacturing costs ( like direct material, dire...
Q: Divisional income statements for the year 2020 for the two divisions of a company appear below. ...
A: Computation of ROI and answer for above question are as follows
Q: 1. For the Ski department only, prepare a departmental income statement. 2. & 3. For the Ski departm...
A:
Q: Problem 6 Listed below are several costs incurred by the loan department of J P Morgan and Chase Ban...
A: Explanation to Cost classification a. Controllable by the loan department- Expenses that managers o...
Q: Calculate the Workers' Compensation premium owing for an employer in Ontario with assessable earning...
A: The worker's compensation premium is the premium paid by the employer to insure the employee is case...
Q: The net income for Bramble Co. for 2022 was $332,200. For 2022, depreciation on plant assets was $72...
A: The cash flow statement is part of the financial statements of the company. It is prepared at the en...
Q: Why are some accounts "temporary" and others are "permanent?" How does this relate to the financial ...
A: There are two types of account namely permanent account and temporary account. Permanent accounts ...
Q: Beginning inventory, purchases, and sales for Item Copper are as follows: Mar. 1 Inventory 450 units...
A: Out of beginning inventory of 450 units , 390 units were sold on march 09 , remaining 60 units were ...
Q: YSL Corporation acquired 80% of the outstanding ordinary shares of GBX Company on June 1, 2022 for P...
A: Non-controlling interest is the part of net assets and ownership that is not in the hands of parents...
Q: On January 3, 2019, P Company acquired 70% interest in S Company for P4,200,000 cash. On this date, ...
A: The consolidated equity represents the amount that is attributable to the shareholders of the group ...
Q: proposal to reduce oil spill on MX5 has a B-C ratio of 1.5. The conventional annual worth of benefit...
A: Solution Formula for benefit cost ratio =present value or the benefit / present value of cost Discou...
Q: manufacturer who uses a job order costing ated to production and sales for January, ory overhead on ...
A: Cash flow statement refers to the statements which reflect all the cash that comes and goes out of t...
Q: Diane Company has the following details for March. Cost of Direct Material used in production P21,00...
A: The cost of goods sold is calculated as follows: Cost of goods sold = Finished goods beginning inven...
Q: The Statement of Comprehensive Income of PRINCESS Merchandising for three years ending December 31, ...
A:
Q: A company has 1,400 units in ending work in process that are 20% complete after transferring out 11,...
A: Work-in-progress (WIP) is a term used in manufacturing and supply-chain management to describe parti...
Q: 6. The local non profit youth symphony is planning a concert fundraiser. The organization estimates ...
A: Lets understand the basics. Break even point is a point at which there is no profit no loss conditio...
Q: TRUE OR FALSE? 1. Cash set aside for bonds payable that will mature in five years is shown as curre...
A: Restricted cash is money maintained for a specified purpose and thus not available for immediate or ...
Q: Case: Verification Department of a Credit Company is in-charged in verifying and approving loans. Th...
A: Department performance refers to the measure to evaluate the efficiencies and productivity of all th...
Q: Vision Limited manufactures a product that has the following costs: Per unit Per year Direct materia...
A: a) Fixed manufacturing overhead per unit = Fixed manufacturing overheadNumber of units= 360,00030,00...
A machine costing $215,000 with a four-year life and an estimated $19,000 salvage value is installed in Luther Company’s factory on January 1. The factory manager estimates the machine will produce 490,000 units of product during its life. It actually produces the following units: 122,700 in Year 1, 124,200 in Year 2, 121,000 in Year 3, 132,100 in Year 4. The total number of units produced by the end of Year 4 exceeds the original estimate—this difference was not predicted. Note: The machine cannot be
Required:
Compute depreciation for each year (and total depreciation of all years combined) for the machine under each depreciation method. (Round your per unit depreciation to 2 decimal places. Round your answers to the nearest whole dollar.)
Trending now
This is a popular solution!
Step by step
Solved in 4 steps with 5 images
- St. Johns Medical Center (SJMC) has five medical technicians who are responsible for conducting cardiac catheterization testing in SJMCs Cath Lab. Each technician is paid a salary of 36,000 and is capable of conducting 1,000 procedures per year. The cardiac catheterization equipment is one year old and was purchased for 250,000. It is expected to last five years. The equipments capacity is 25,000 procedures over its life. Depreciation is computed on a straight-line basis, with no salvage value expected. The reading of the catheterization results is conducted by an outside physician whose fee is 120 per test. The technicians report with the outside physicians note of results is sent to the referring physician. In addition to the salaries and equipment, SJMC spends 50,000 for supplies and other costs needed to operate the equipment (assuming 5,000 procedures are conducted). When SJMC purchased the equipment, it fully expected to perform 5,000 procedures per year. In fact, during its first year of operation, 5,000 procedures were run. However, a larger hospital has established a clinic in the city and will siphon off some of SJMCs business. During the coming years, SJMC expects to run only 4,200 cath procedures yearly. SJMC has been charging 850 for the procedureenough to cover the direct costs of the procedure plus an assignment of general overhead (e.g., depreciation on the hospital building, lighting and heating, and janitorial services). At the beginning of the second year, an HMO from a neighboring community approached SJMC and offered to send its clients to SJMC for cardiac catheterization provided that the charge per procedure would be 550. The HMO estimates that it can provide about 500 patients per year. The HMO has indicated that the arrangement is temporaryfor one year only. The HMO expects to have its own testing capabilities within one year. Required: 1. Classify the resources associated with the cardiac catheterization activity into one of the following: (1) committed resources, or (2) flexible resources. 2. Calculate the activity rate for the cardiac catheterization activity. Break the activity rate into fixed and variable components. Now, classify each activity resource as relevant or irrelevant with respect to the following alternatives: (1) accept the HMO offer, or (2) reject the HMO offer. Explain your reasoning. 3. Assume that SJMC will accept the HMO offer if it reduces the hospitals operating costs. Should the HMO offer be accepted? 4. Jerold Bosserman, SJMCs hospital controller, argued against accepting the HMOs offer. Instead, he argued that the hospital should be increasing the charge per procedure rather than accepting business that doesnt even cover full costs. He also was concerned about local physician reaction if word got out that the HMO was receiving procedures for 550. Discuss the merits of Jerolds position. Include in your discussion an assessment of the price increase that would be needed if the objective is to maintain total revenues from cardiac catheterizations experienced in the first year of operation. 5. Chandra Denton, SJMCs administrator, has been informed that one of the Cath Lab technicians is leaving for an opportunity at a larger hospital. She met with the other technicians, and they agreed to increase their hours to pick up the slack so that SJMC wont need to hire another technician. By working a couple hours extra every week, each remaining technician can perform 1,050 procedures per year. They agreed to do this for an increase in salary of 2,000 per year. How does this outcome affect the analysis of the HMO offer? 6. Assuming that SJMC wants to bring in the same revenues earned in the cardiac catheterization activitys first year less the reduction in resource spending attributable to using only four technicians, how much must SJMC charge for a procedure?A machine costing $257,500 with a four-year life and an estimated $20,000 salvage value is installed in Luther Company’s factory on January 1. The factory manager estimates the machine will produce 475,000 units of product during its life. It actually produces the following units: 220,000 in 1st year, 124,600 in 2nd year, 121,800 in 3rd year, 15,200 in 4th year. The total number of units produced by the end of year 4 exceeds the original estimate—this difference was not predicted. (The machine must not be depreciated below its estimated salvage value.) Required: Compute depreciation for each year (and total depreciation of all years combined) for the machine under each depreciation method. (Round your per unit depreciation to 2 decimal places.)A machine costing $257,500 with a four-year life and an estimated $20,000 salvage value is installed in Luther Company’s factory on January 1. The factory manager estimates the machine will produce 475, 000 units of product during its life. It actually produces the following units: 220,000 in 1st year, 124,000 in 2nd year, 121,800 in 3rd year, 15,200 in 4th year. The total number of units produced by the end of year 4 exceeds the original estimate—this difference was not predicted. (The machine must not be depreciated below its estimated salvage value.) Required: Prepare a table with the following column headings and compute depreciation for each year (and total depreciation of all years combined) for the machine under each depreciation method.
- A machine costing $214,000 with a four-year life and an estimated $18,000 salvage value is installed in Luther Company's factory on January 1. The factory manager estimates the machine will produce 490,000 units of product during its life. It actually produces the following units: 122,400 in Year 1, 123,600 in Year 2, 121,000 in Year 3, 133,000 in Year 4. The total number of units produced by the end of Year 4 exceeds the original estimate-this difference was not predicted. Note: The machine cannot be depreciated below its estimated salvage value. Required: Compute depreciation for each year (and total depreciation of all years combined) for the machine under each depreciation method. Note: Round your per unit depreciation to 2 decimal places. Round your answers to the nearest whole dollar. Complete this question by entering your answers in the tabs below. Straight Line Units of Production Double declining balance Compute depreciation for each year (and total depreciation of all years…A machine costing $207,000 with a four-year life and an estimated $17,000 salvage value is installed in Luther Company’s factory on January 1. The factory manager estimates the machine will produce 475,000 units of product during its life. It actually produces the following units: 123,300 in Year 1, 122,500 in Year 2, 120,300 in Year 3, 118,900 in Year 4. The total number of units produced by the end of Year 4 exceeds the original estimate—this difference was not predicted. (The machine cannot be depreciated below its estimated salvage value.)Required:Compute depreciation for each year (and total depreciation of all years combined) for the machine under each depreciation method. (Round your per unit depreciation to 2 decimal places. Round your answers to the nearest whole dollar.)A machine costing $213,200 with a four-year life and an estimated $18,000 salvage value is installed in Luther Company’s factory on January 1. The factory manager estimates the machine will produce 488,000 units of product during its life. It actually produces the following units: 122,200 in 1st year, 124,000 in 2nd year, 121,000 in 3rd year, 130,800 in 4th year. The total number of units produced by the end of year 4 exceeds the original estimate—this difference was not predicted. (The machine must not be depreciated below its estimated salvage value.) Required: Compute depreciation for each year (and total depreciation of all years combined) for the machine under each depreciation method. (Round your per unit depreciation to 2 decimal places. Round your answers to the nearest whole dollar.)
- A machine costing $209,000 with a four-year life and an estimated $17,000 salvage value is installed in Luther Company’s factory on January 1. The factory manager estimates the machine will produce 480,000 units of product during its life. It actually produces the following units: 122,900 in Year 1, 123,300 in Year 2, 119,900 in Year 3, 123,900 in Year 4. The total number of units produced by the end of Year 4 exceeds the original estimate—this difference was not predicted. Note: The machine cannot be depreciated below its estimated salvage value.Required:Compute depreciation for each year (and total depreciation of all years combined) for the machine under each depreciation method. (Round your per unit depreciation to 2 decimal places. Round your answers to the nearest whole dollar.) Compute depreciation for each year (and total depreciation of all years combined) for the machine under the Straight-line depreciation. Straight-Line…A machine costing $209,000 with a four-year life and an estimated $17,000 salvage value is installed in Luther Company's factory on January 1. The factory manager estimates the machine will produce 480,000 units of product during its life. It actually produces the following units: 122,900 in Year 1, 123,700 in Year 2, 120,000 in Year 3, 123,400 in Year 4. The total number of units produced by the end of Year 4 exceeds the original estimate-this difference was not predicted. Note: The machine cannot be depreciated below its estimated salvage value. Required: Compute depreciation for each year (and total depreciation of all years combined) for the machine under each depreciation method. Note: Round your per unit depreciation to 2 decimal places. Round your answers to the nearest whole dollar. Complete this question by entering your answers in the tabs below. Straight Line Compute depreciation for each year (and total depreciation of all years combined) for the machine under the…A machine costing $215,200 with a four-year life and an estimated $18,000 salvage value is installed in Luther Company's factory on January 1. The factory manager estimates the machine will produce 493,000 units of product during its life. It actually produces the following units: 122,300 in Year 1, 124,000 in Year 2, 120,100 in Year 3, 136,600 in Year 4. The total number of units produced by the end of Year 4 exceeds the original estimate-this difference was not predicted. Note: The machine cannot be depreciated below its estimated salvage value. Required: Compute depreciation for each year (and total depreciation of all years combined) for the machine under each depreciation method. Note: Round your per unit depreciation to 2 decimal places. Round your answers to the nearest whole dollar. Complete this question by entering your answers in the tabs below. Straight Line Units of Production Compute depreciation for each year (and total depreciation of all years combined) for the machine…
- A machine costing $210,000 with a four-year life and an estimated $16,000 salvage value is Installed in Luther Company's factory on January 1. The factory manager estimates the machine will produce 485,000 units of product during Its life. It actually produces the following units: 122,900 in Year 1, 123,900 In Year 2. 120,200 in Year 3. 126,000 in Year 4. The total number of units produced by the end of Year 4 exceeds the original estimate-this difference was not predicted. (The machine cannot be depreciated below its estimated salvage value.) Required: Compute depreciation for each year (and total depreclation of all years combined) for the machine under each depreciation method. (Round your per unit depreciation to 2 decimal places. Round your answers to the nearest whole dollar.) Complete this question by entering your answers in the tabs below. Units of Straight Line DDB Production Compute depreciation for each year (and total depreciation of all years combined) for the machine…A machine costing $213,800 with a four-year life and an estimated $19,000 salvage value is installed in Luther Company's factory on January 1. The factory manager estimates the machine will produce 487,000 units of product during its life. It actually produces the following units: 121,400 in Year 1, 122,500 in Year 2, 120,000 in Year 3, 133,100 in Year 4. The total number of units produced by the end of Year 4 exceeds the original estimate-this difference was not predicted. Note: The machine cannot be depreciated below its estimated salvage value. Required: Compute depreciation for each year (and total depreciation of all years combined) for the machine under each depreciation method. Note: Round your per unit depreciation to 2 decimal places. Round your answers to the nearest whole dollar. Complete this question by entering your answers in the tabs below. Straight Line Units of Production Year Year 1 Year 2 Year 3 Year 4 Total Compute depreciation for each year (and total depreciation…A machine costing $213,600 with a four-year life and an estimated $16,000 salvage value is installed in Luther Company's factory on January 1. The factory manager estimates the machine will produce 494,000 units of product during its life. It actually produces the following units: 121,600 in Year 1, 123,700 in Year 2, 119,700 in Year 3, 139,000 in Year 4. The total number of units produced by the end of Year 4 exceeds the original estimate-this difference was not predicted. Note: The machine cannot be depreciated below its estimated salvage value. Required: Compute depreciation for each year (and total depreciation of all years combined) for the machine under each depreciation method. Note: Round your per unit depreciation to 2 decimal places. Round your answers to the nearest whole dollar. Complete this question by entering your answers in the tabs below. Straight Line Units of Production Compute depreciation for each year (and total depreciation of all years combined) for the machine…