A generator is feeding the load. A second load will then be connected in parallel with the first load. The generator has an idle frequency of 61Hz and an Sp slope of 1MW/Hz. Load2 draws 800kW active power at 0.707 reverse power factor, while load1 draws 1000kW active power at 0.8 reverse power factor. What will be the operating frequency of the system after load 2 is connected? *Please explain the solution step by step

A generator is feeding the load. A second load will then be connected in parallel with the first load. The generator has an idle frequency of 61Hz and an Sp slope of 1MW/Hz. Load2 draws 800kW active power at 0.707 reverse power factor, while load1 draws 1000kW active power at 0.8 reverse power factor. What will be the operating frequency of the system after load 2 is connected? *Please explain the solution step by step

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

two synchronous generators are connected in parallel, feeding a load together. the frequency of the first generator in the no-load State is 52 Hz and the slope of the characteristic is 1 MW/Hz. the total power of the load fed by these two generators is 2.5 MW and the power coefficient is 0.6 inductive. by drawing the characteristic curve of the system;a) what is the frequency of the system when the load in question is fed, and how do the two generators share the load between themselvesb) if a load of 0.5 MW is added to the system, find the operating frequency of the new system and the powers given by each generatorc) if a second load of 0.5 MW is connected to the system, the idle operating frequency of the second generator is increased by 0.5 Hz, what happens to the operating frequency of the system and the power values given by the generators
. Two dc shunt generators A and B are rated at 100 and 150 kW at 110 V respectively, Their external load characteristics may be considered as straight line. The voltage drop In the terminal voltage from no-load to full-load Is 10 V for A and 20 V ſor B. Determine the operating voltage when these generators are operated in parallel to supply a load of 220 kW.
b) Two synchronous generators, G2 and G2, are connected parallelly supplying a load. Generator G1 has a no-load frequency of 50.5 Hz and a slope of 300 MW/Hz. Generator G2 has a no-load frequency of 50.2 Hz and a slope of 500 MW/Hz. The load consumes 250 MW real power. (1) At what frequency does this system operate, and how much power is supplied by each of the two generators? (ii) An additional 100 MW load is added to this power system. What is the new system frequency, and how much power do G1 and G2 supply? (iii) The governor set point of G2 is changed to control system frequency back to 50 Hz. Determine the G2 governor set point.
Three identical steam-turbine generators G1, G2, and G3 are operating in parallel. Each generator is: 7.2 KV, 20 MVA, 50 Hz, 0.85 PF lagging, 4-poles, Y-connected, with a synchronous reactance of 2 Q and an armature resistance of 0.05 Q. Each of generators G1 and G2 has a characteristic power-frequency slope of 4.7 MW/Hz, while generator G3 has a slope of 5.0 MW/Hz. If all three generators are supplying a total load of 51.2 MW, and the no-load frequency of each generator is set to 52.4 Hz, what will the system frequency be? How much power is supplied by generator G3? Select one: O a. fsys = 48.84 Hz, PG3 = 17.8 MW O b. None O c. fsys = 49.05 Hz, PG3 = 16.75 MW O d. fsys = 48.95 Hz, PG3 = 17.25 MW Clear my choice
Two identical 2,000 kW alternator operates in parallel. The governor of the first machine is such that the frequency drops uniformly from 50 Hz at no-load to 48 Hz at full-load. The corresponding uniform speed drop of the second machine is 50 Hz to 47.5 Hz. What is the maximum load that can be delivered without overloading either machine?
Three identical steam-turbine generators G1, G2, and G3 are operating in parallel. Each generator is: 7.2 KV, 20 MVA, 50 Hz, 0.85 PF lagging, 4-poles, Y-connected, with a synchronous reactance of 2 N and an armature resistance of 0.05 Q. Each of generators Gj and G2 has a characteristic power-frequency slope of 4.7 MW/Hz, while generator G3 has a slope of 5.0 MW/Hz. If all three generators are supplying a total load of 51.2 MW, and the no-load frequency of each generator is set to 52.4 Hz, what will the system frequency be? How much power is supplied by generator G3? Select one: O a. fsys = 48.84 Hz, PG3 =17.8 MW O b. fsys = 49.05 Hz, PG3 = 16.75 MW c. fsys = 48.95 Hz, PG3 = 17.25 MW d. None
Three identical steam-turbine generators G1, G2, and G3 are operating in parallel. Each generator is: 7.2 KV, 20 MVA, 50 Hz, 0.85 PF lagging, 4-poles, Y-connected, with a synchronous reactance of 2 Q and an armature resistance of 0.05 N. Each of generators G1 and G2 has a characteristic power-frequency slope of 4.7 MW/Hz, while generator G3 has a slope of 5.0 MW/Hz. If all three generators are supplying a total load of 51.2 MW, and the no-load frequency of each generator is set to 52.4 Hz, what will the system frequency be? How much power is supplied by generator G3? Select one: O a. fsys = 48.84 Hz, PG3 = 17.8 MW O b. fsys = 49.05 Hz, PG3 = 16.75 MW O c. fsys = 48.95 Hz, PG3 = 17.25 MW O d. None
READ THE PROBLEM AND JUST DRAW CIRCUIT DIAGRAM. NO NEED TO SOLVE ANYTHING. A short shunt compound generator delivers 150A at a terminal voltage is 230V.The shunt field current is 2.5A. The resistances of the armature, series field and diverterare 0.032 ohm, 0.015 ohm and 0.03 ohm respectively. Calculate the electrical efficiencyof the generator at this load. Modify the circuit diagram on the picture based on the problem. Answer: 95.7%
1.Two identical shunt generators running in parallel, each with armature resistance of 0.02 ohms and field resistance of 50 ohms. The combined load current is 5000A. The field are so excited that the generated voltages of one machine is 610V and the other is 600V. The terminal voltage of this parallel combination will be. www Ish1 Rh1 a.350-360 V b.450-460 V c. 550-560V Rat www az G₂ Raz 5000 A Ish2
.Two dc shunt generators A and B are rated at 100 and 150 kW at 110 V respectively, Their external load characteristics may be considered as straight line. The voltage drop In the terminal voltage from no-load to full-load is 10 v for A and 20 V for B. Determine the operating voltage when these generators are operated in parallel to supply a load of 220 kW.
Two 30 AC generators are such that one has twice the linear dimensions of the other. The field windings of each are excited to give identical sinusoidal air gap flux density waveform. Both have the same number of stator slots and identical winding patterns. The conductors per slot in big generator in K times that of the smaller one. The value of K to get equal no-load voltage at same frequency is (a)8 (b) 8 1 (d) 7 (c) 4
What are the conditions in paralleling of these DC Generators:a. Shuntb. Seriesc. Compound