Use (buoyancy concept).Fluid -mechanics A cylindrical measuring instrument is being designed to study the Ganga river. It is proposed that the instrument should float with some part above the water as shown in the figure below.waterDConsidering the density of the cylindrical instrument material as 920 kg/m³ and height as 1.5 m determine the minimum diameter of the cylindrical instrument for the floatation in a stableequilibrium. (Density of water -1000 kg / m³)

Name: Use (buoyancy concept).Fluid -mechanics A cylindrical measuring instru
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: Use (buoyancy concept).Fluid -mechanics A cylindrical measuring instrument is being designed to study the Ganga river. It is proposed that the instrument should float with some part above the water as shown in the figure below.waterDConsidering the d

Answered: Image /qna-images/answer/f2f2b8ae-03d2-43e1-948a-5598e3a584c7.jpg

Engineering

Mechanical Engineering

A cylindrical measuring instrument is being designed to study the Ganga river. It is proposed that the instrument should float with some part above the water as shown in the figure below. water Considering the density of the cylindrical instrument material as 920 kg/m³ and height as 1.5 m determine the minimum diameter of the cylindrical instrument for the floatation in a stable equilibrium. (Density of water -1000 kg/m³)

A cylindrical measuring instrument is being designed to study the Ganga river. It is proposed that the instrument should float with some part above the water as shown in the figure below. water Considering the density of the cylindrical instrument material as 920 kg/m³ and height as 1.5 m determine the minimum diameter of the cylindrical instrument for the floatation in a stable equilibrium. (Density of water -1000 kg/m³)

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter5: Analysis Of Convection Heat Transfer

Section: Chapter Questions

Problem 5.5P: Evaluate the dimensionless groups hcD/k,UD/, and cp/k for water, n-butyl alcohol, mercury, hydrogen,...

See similar textbooks

Similar questions

The capillary rise and fall in the glass tube used for both measuring water level and mercury level is not to exceed 0.8mm and 0.3mm respectively. Determine the minimum size of a glass tube for both liquids, given that surface tension of water = 0.082N/m and surface tension of mercury= 0.52 N/m with diagram. MODEL QUESTION PAPER
Quero.. mo A cylindrical measuring instrument is being designed to study the Ganga river. It is proposed that the instrument should float with some part above the water as shown in the figure below. water Considering the density of the cylindrical instrument material as 920 kg/m³ and height as 1.5 m determine the minimum diameter of the cylindrical instrument for the floatation in a stable equilibrium. (Density of water -1000 kg/m³)
Read the question carefully and give me right solution according to the question. Lacking on mercury, an improvised barometer uses a liquid that weighs 0.735 times that of mercury. Assuming that the unit of air is constant 12 N/m^3, evaluate the approximate height of the mountain if the barometer readings are 600 mm at the base and 850 mm at the top of the mountain. sg=13.6
Solve Correctly A cylinder object is suspended in a liquid at a distance of 38cm below the surface. The diameter of the object is 140cm and the density of the object is 960 kg/m3. The density ratio is 1. Determine the height of the cylinder, if the buoyant force is 7N.
A rigid container is closed at one end and measures 8 in. diameter by 12 in. long. The container is held vertically and slowly moved downward until the pressure in the container is 15.5 psia. What will be the depth of the water surface measure from the free water surface? ANswer: 22in Fluid Mechanics ( Please include units)
For your science exhibit, you want to make a block of wood float at the interface between a layer of oil of unknown density Poil, and water (pwater = 1000 kg/m3 inside a container as shown. The density of the wood is pwood = 800 kg/m3. What must be the density of the oil so that only 30.0 % of the wood is submerged in water?
The plastic block shown below measures l.5 m x/.S m x(.7 m and has a specific gravity of 0.38. The concrete block B (density = 2400 kg/m) is suspended from the corner of the plastic block by means of a cable and the plastic block is thus floating in the lake (T = 15°C) in the orientation shown. Determine the volume of the concrete block (units of liters) noting that it does not rest on the bottom of the lake, Neglect the weight and volume of the cable in your analysis. %3D %3D 1.7 m 0.5m Water Cable B
Q5 A U-tube manometer similar to that shown below is used to measure the gauge pressure of water (mass density p = 1000 kg /m3). If the density of mercury is 13.6 x 103 kg /m³, what will be the gauge pressure at A if h1 = 0.45 m and D is 0.7 m above BC. Wwater Wmercury
Calculate the capillary rise in cm in a glass tube of 3.0 mm diameter when immersed vertically in mercury. Take the surface tensions for mercury as 0.0725 N/m in contact with air. The specific gravity of mercury is 13.6.
The pressure outside the droplet of water of diameter 0.04 mm is 103.2 kPa (atmospheric pressure). Calculate the pressure within the droplet if surface tension is given as 0.0725 N/m of water. O (a) DROPLET (b) SURFACE TENSION (c) PRESSURE FORCES
Sometimes manometer dimensions have a signifi canteffect. In Fig. containers ( a ) and ( b ) are cylindricaland conditions are such that p a = p b . Derive a formula forthe pressure difference p a - p b when the oil–water interfaceon the right rises a distance ∆ h< h , for ( a ) d << D and ( b ) d=0.15 D . What is the percentage change in the value of ∆ p ?
An air-filled, hemispherical shell is attached to the ocean floor at adepth of 10 m as shown in fig. A mercury barometer located inside the shell reads 765 mmHg (absolute pressure inside the shell)m, and a mercury u-tube manometer designedto givethe outside water pressure indicates differential reading of 735 mmHg as illusrated. Based on these data,what is the atmospheric pressure at the ocean surface for seawater (SG=1.03)