A composite beam (as shown) is made up of wood (white) and steel (brown) with modulus of elasticity equal to 200,000 MPa for steel and 40,000 MPa for wood. If the allowable stress for steel is 50 MPa, and 5 MPa for wood, determine the largest bending moment (in kN-m) load that can be applied to the sectio

A composite beam (as shown) is made up of wood (white) and steel (brown) with modulus of elasticity equal to 200,000 MPa for steel and 40,000 MPa for wood. If the allowable stress for steel is 50 MPa, and 5 MPa for wood, determine the largest bending moment (in kN-m) load that can be applied to the sectio

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A composite beam is made of two brass [E = 120 GPa] bars bonded to two aluminum [E = 70 GPa] bars, as shown. The beam is subjected to a bending moment of 400 N-m acting about the z axis. Using a = 15 mm, b = 100 mm, c = 30 mm, and d = 65 mm, calculate (a) the maximum bending stress in the aluminum bars. (b) the maximum bending stress in the brass bars. Aluminum y Brass Aluminum b Brass C a d
A composite beam is made of two brass [E = 120 GPa] bars bonded to two aluminum [E = 73 GPa] bars, as shown. The beam is subjected to a bending moment of 445 N-m acting about the z axis. Using a = 15 mm, b = 125 mm, c = 30 mm, and d = 75 mm, calculate (a) the maximum bending stress in the aluminum bars. (b) the maximum bending stress in the brass bars. Z Aluminum C Aluminum Answers: (a) Ogl Brass (b) Obr= i i b Brass a MPa MPa
3 For a composite bar as shown below, what is the relation between axial deformation and thermal deformations in the bar? Cu tube (1) Steel bar (2) D d- Where, o,, o, = stresses in Cu and steel bar respectively. Coefficient of thermal expansion for Cu and steel bar respectively.
What will be the moment of resistance of the composite section shown in the figure below if the permissible stress in wood and steel is 70 N/mm2 and 120 N/mm2 respectively. Steel plate Wood -200- 10 150 400 126 20
A composite beam made of steel and bronze has the cross section shown. The cross-sectional dimensions are b1 = 0.5 in, b2 = 1.5 in., and d = 1.0 in. The elastic modulus of the steel is E1 = 30,000 ksi, and its allowable bending stress is 24 ksi. The elastic modulus of the bronze is E, = 15,000 ksi, and its allowable bending stress is 16 ksi. Calculate the magnitude of the allowable bending moment that can be applied about the z centroidal axis. y Bronze (2) Steel (1) bị b2 Answer: M = i Ib-in. Save for Later Attempts: 0 of 1 used Submit Answer
4. Steel and aluminum plates are used to reinforced 100 x 175 mm timber beam. The three materials are fastened firmly as shown so that there will be no relative movement between them. Given the following material properties, determine the safe resisting moment of the beam in KN.M. Allowable bending stress, Fb Modulus of Elasticity, E Steel = 130MPA Steel = 210MPA Aluminum = 90 MPa Aluminum = 80 MPa Wood = 20 MPa Wood = 15 MPa 30 mm CTEEL WOOD ww.skl A LUMINUM 140 mm
Q1 A cantilever composite beam is formed by bonding together brass bar (EB = 100 GPa) and aluminium (EA = 70 GPa) with cross section and loading at free end as shown in Figure Q1. Parameter x, y, and z are given by: X=0 Y=0 Z=2 (a) Determine the centroid and the moment of inertia of the composite section. (b) Calculate the maximum tensile and compressive stresses in the brass and aluminium. brass 5x mm (10 mm 20mm |4y mm 0.5(4y) mm M=2.z kN.m 4y mm aluminium Figure Q1 |
The composite bar is firmly attached to unyielding supports. The bar is stress-free at 50°F. Compute the stress in each material after the 80-kip force is applied and the temperature is increased to 100°F. Use a = 6.5 x106/°F for steel and a = 12.8 x106/°F for aluminum. Aluminum A = 2 in.² E = 10 x 106 psi 15 in. Steel A = 3 in.2 E = 29 × 106 psi 80 kips 10 in.
4
The composite bar shown is firmly attached to unyielding supports. An axial load P = 207 kN is applied at 26 ° C. Find the stress in each material at 63 °C. Assume a = 11.7 µm/(m-°C) for steel and 23 um/(m-C) for aluminum. Given: Ea = 75 GPa, Aa = 991 mm², La = 204 mm, Es = 213 GPa, As = 1,213 mm2, Ls = 318 mm. Answer must be in MPa. Aluminum Steel La Ls
I need the answer to the question in engineering resistance
A composite beam is made of two brass [E = 112 GPa] bars bonded to two aluminum [E = 69 GPa] bars, as shown. The beam is subjected to a bending moment of 350 N-m acting about the z axis. Using a = 15 mm, b = 115 mm, c = 25 mm, and d = 65 mm, calculate (a) the maximum bending stress in the aluminum bars. (b) the maximum bending stress in the brass bars. Z Aluminum с Aluminum Answers: (a) Jal= (b) Obr= Brass i y i b Brass a a MPa MPa