A closed cylindrical tank containing a pressurized fluid has an inside diameter of 820 mm and a wall thickness of 10.5 mm. The stresses in the wall of the tank acting on a rotated element have the following values: o, = 60 MPa, o, = 90 MPa, T = 20 MPa. Determine the fluid pressure. Answer: p= i 1.3610 On Tnt MPa

A closed cylindrical tank containing a pressurized fluid has an inside diameter of 820 mm and a wall thickness of 10.5 mm. The stresses in the wall of the tank acting on a rotated element have the following values: o, = 60 MPa, o, = 90 MPa, T = 20 MPa. Determine the fluid pressure. Answer: p= i 1.3610 On Tnt MPa

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

An 8 mm thick steel plate has an outside diameter of 600 mm and a length of 3 m. The plate is subjected to and internal pressure of 2 MPa. 54. When the tank is filled with water, determine the circumferential stress in MPa Determine the longitudinal stress in MPa at the bottom of the tank when filled with water.
A vertical cylindrical steel tank 3 m in diameter and 6 m high has a wall thickness of 12 mm. If the tank is filled with water, determine the circumferential stress. Select the correct response: 4.08 MPa 8.16 MPa 7.36 MPa 3.68 MPa
A cylindrical water tank is 8m in diameter and 12m high. If the tank is to be completely filled, determine the minimum thickness of the tank plating if the stress is limited to 40 MPa. Hint: The water pressure at a certain level is a product of its weight and depth. (p=yH) 13.18 mm O 5.89 mm 10.25 mm O 12.6 mm 11.77 mm 14.13 mm O 21 mm 26 mm 28.25 mm O 24.5 mm
A cylindrical tank for transporting compressed gas has an inside diameter of 350 mm and a wall thickness of 4 mm. If the tank is made of steel that can withstand a tensile stress of 220 MPa, determine the maximum gas pressure that the tank can contain. Answer: p= MPa
The cylindrical tank with a spherical end-cap has an outer radius of 2.54m and a wall thickness of 53 mm. if the tank is pressurized to 1.45 MPA. What is the circumferential stress (MPA) in the cylinder? 2 m
O d3-136.24x103 mm3 A water tank is 6 m in diameter and 14 m high, if the tank is to be completely filled .Determine the minimum thickness of the tank plating, if the stress is limited to 35 MPa ? the density of water is 103 kg/m3. O 0.0550 mm 0.0117 mm O 0.03312 mm Clear form Back Submit
A spherical tank is used to store gas. The tank should be able to withstand a maximum of 125 MPa stress. If the tank has a thickness of 10mm, what should be the inner radius (in meters) of the tank to be able to withstand an internal pressure of 2 atm.
The manhole cover of an ammonia storage tank is to be held by 25 stud bolts. If the pressure inside the storage tank will remain constant at 12.5 kg/cm2 and the manhole diameter is 508 mm, what should be the stress area of the carbon steel bolts?
An upright cylindrical tank 15 m in diameter and 13 m high is completely filled with water determine the minimum thickness of the tank plating if the stress is limited to 40 Mpa.
Design the thickness of the cylinder tank in the shown figure if it is to be filled with oil whose density is 790 kg/m³. The maximum stress of the material is 70MPa. Steel tank dimensions are D = 2.5m and L = 4m.
The cylindrical portion of the propane tank has an outer diameter of 12.02 in. and a wall thickness of 0.13 in. Calculate the longitudinal stress (in psi) in the wall of the cylinder when the tank is pressurized to 162.2 psi.
How much work is done in forcing 50 ft3 of water through a 0.5-inch pipe if the difference in pressure at the two ends of the pipe is 15 lbs/in2? PLS DONT FORGET TO INCLUDE FREE BODY DIAGRAM Use the equation Work=(P1-P2) times change in Volume If POSSIBLE