A 0.013 m diameter, 0.5 m long cylindrical metal bar is subjected to a compressive force of 8,500 N. This load does not exceed the yield strength of the material. Determine its diameter under this load. You will need some of the following properties of the metal to solve the problem: modulus of elasticity = 207 GPa, Poisson’s ratio = 0.30, yield strength = 180 MPa, tensile strength = 380 MPa, ductility = 23% elongation.

A 0.013 m diameter, 0.5 m long cylindrical metal bar is subjected to a compressive force of 8,500 N. This load does not exceed the yield strength of the material. Determine its diameter under this load. You will need some of the following properties of the metal to solve the problem: modulus of elasticity = 207 GPa, Poisson’s ratio = 0.30, yield strength = 180 MPa, tensile strength = 380 MPa, ductility = 23% elongation.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter2: Axially Loaded Members

Section: Chapter Questions

Problem 2.7.5P: Determine the strain energy per unit volume (units of psi) and the strain energy per unit weight...

See similar textbooks

Similar questions

You are given a square rod of 6061-T6 aluminum (cross-section = 4mm X 4mm, length = 2.3m). The material has a Young’s modulus of 72 GPa. If a tensile load of 3 kN is applied to the ends of the rod (parallel to the 2.3m dimension), what is the applied engineering normal stress?
You are given a square rod of 6061-T6 aluminum (cross-section = 4mm X 4mm, length = 2.3m). The material has a Young’s modulus of 72 GPa. If a compressive load of 3 kN is applied parallel to the 2.3m dimension, what is the resulting engineering normal strain?
2. Consider a cylindrical nickel wire 0.08 in. in diameter and 1200 in. long. Calculate its elongation when a load of 300 N is applied. Assume that the deformation is totally elastic. 3. A cylindrical specimen of a metal alloy 10 mm in diameter is stressed elastically in tension. A force of 3370 Ibr produces a reduction in specimen diameter of 7 x 10* mm. Compute Poisson's ratio for this material if its elastic modulus is 100 GPa. 4. A cylindrical specimen of a hypothetical metal alloy is stressed in compression. If its original and final diameters are 20.000 and 20.025 mm, respectively, and its final length is 74.96 mm, compute its original length if the deformation is totally elastic. The elastic and shear moduli for this alloy are 105 GPa and 39.7 GPa, respectively.
A tensile force of 200 KN is applied on a 0.02-m diameter and.2-m long rod. After applying the load, the diameter of the rod decreases to 0.01998 m and the length increases to 2.01 m. Assuming no permanent deformation occurs in that material, the modulus of elasticity (GPa) is?
A very fine fabric 0.020 mm in diameter can support a 20 g object. How does the stress in the fabric compare with the ultimate strength in tension of copper
The Young's modulus of a material is 125 GPa and Poisson's ratio is 0.25. The modulus of rigidity of the material is
Stress (MPa) 500 400 Consider the brass alloy for which the stress-strain behavior is shown in the Animated Figure 7.12. A cylindrical specimen of this material 9.9mm (0.3898 in.) in diameter and 98.8mm (3.890 in.) long is pulled in tension with a force of 9780N(2199/b). If it is known that this alloy has a value for Poisson's ratio of 0.35, compute (a) the specimen elongation, (b) the reduction in specimen diameter. Note: because the diameter decreases, enter a minus sign in your answer. Tensile strength 450 MPa (65,000 psi), Strain =0 Stress = 0 MPA Stress =0 psi 70 Strain = 0 Stress 0 MPA 60 Stress = 0 psi 103 psi 50 40 MPa Yield strength 300 250 MPa (36,000 psi) 40 30 200 200 20 100 10 100 0 0 T 10 P 0.10 0.20 Strain 10.065 0 0.30 0.40 30 20 10 Stress (10 psi)
A 8mm diameter rod, of unknown material, is subjected to 50kN tensile load. In the process, its length increased from 300mm to 303mm. If the stress is proportional to strain, determine the modulus of elasticity, in GPa. of the material?
A tensile stress is to be applied along the axis of a cylindrical brass rod with diameter of 200 mm. What is the load magnitude required to produce 2.8 x 10^-2 change in diameter if the deformation is entirely elastic?
A 3-mm-long gold alloy wire intended to electricallybond a computer chip to its package has an initial diameter of30 μm. During testing, it is pulled axially with a load of 15grams-force. If the wire diameter decreases uniformly to29 μm, compute the following:a. The final length of the wire.b. The true stress and true strain at this load.c. The engineering stress and strain at this load.
Sketch a tensile member with (a) a rectangular crosssection, (b) a solid circular cross section, and (c) a circulartubecross section, and label the dimensions symbolically (e.g.,label the radius for the solid circular case). For each member, write out the definition of engineering stress in terms of the actual dimensions of the component. If therectangular member has dimensions of width and thicknessequal to 1 cm 0.3 cm, what would be the radius of a solidcircular member such that the stress is equal for an equaltensile load? If a tube has an outer radius equal to that ofthis same solid cylinder, what is the maximum inner radiussuch that the stress does not exceed 200% of the stress inthe solid cylinder?
10-mm-diameter rod of 3003-H14 aluminium alloy is subjected to a 6-kN tensile load. Calculate the resulting rod diameter. Calculate the diameter if this rod is subjected to a 6-kN compressive load, given that the elastic modulus =70 GPa and poisson ratio=0.33