A tensile stress is to be applied along the axis of a cylindrical brass rod with diameter of 200 mm. What is the load magnitude required to produce 2.8 x 10^-2 change in diameter if the deformation is entirely elastic?

A tensile stress is to be applied along the axis of a cylindrical brass rod with diameter of 200 mm. What is the load magnitude required to produce 2.8 x 10^-2 change in diameter if the deformation is entirely elastic?

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter8: Applications Of Plane Stress (pressure Vessels, Beams, And Combined Loadings)

Section: Chapter Questions

Problem 8.2.8P: A spherical steel pressure vessel (diameter 500 mm, thickness 10 mm) is coated with brittle lacquer...

See similar textbooks

Related questions

Q: steel band 8mm thick is to be pulled on to a cylinder 30cm in diameter . The internal diameter of…

Q: A plastic bar of 88 mm is to be twisted by torques T until the angle of rotation between the ends of…

Q: a square rod of 6061-T6 aluminum (cross-section = 4mm X 4mm, length = 2.3m). The material has a…

A: Given Tensile load, P =3 kN Cross-section = 4mm X 4mm Find The applied engineering…

Q: A very fine fabric 0.020 mm in diameter can support a 20 g object. How does the stress in the fabric…

A: Given: Mass of the object (m)=0.020kgDiameter of the fabric (D)=0.020mm Assumption: Ultimate tensile…

Q: Calculate the reliability if information about both the strength data (170 ± 20 MPa) and stress data…

A: Given: The standard deviation based on strength data = 2x20 = 40 MPa The standard deviation based on…

Q: A bar is 500mm long and is stretched to 505mm with a force of 50kN.The bar is 10mm diameter.…

A: Given data: Initial length of the bar (Li) = 500 mm Stretched or final length of the bar (Lf) = 505…

Q: A round steel tension member (E = 206,900 MPa), 1,397 mm long, is subjected to a maximum load of…

Q: The length, Young's modulus and coefficient of thermal expansion of bar P are twice that of bar Q.…

A: Thermal stress: The stress induced in the restricted object (not allowed to contract or expand…

Q: Sketch a tensile member with (a) a rectangular crosssection, (b) a solid circular cross section, and…

Q: Calculate the modulus of rigidity and bulk modulus of a cylindrical bar of diameter of 25 mm and of…

A: Relation between the lateral and the longitudinal strain is εl=4εd The poison's ratio is…

Q: Compute the maximum length of the specimen before deformation if the

Q: Calculate the modulus of elasticity of the following material if it has a design stress of 250 kPa,…

Q: A bar of thickness 15mm and having a rectangular cross-section carries a load of 120kN. Determine…

Q: A cylindrical bar 120 mm long and having a diameter of 12 mm is pulled in tension with a load of…

Q: Find the strain proportions (ɛ1:E2:E3) that existed in a forming process where O3= 0. Also specify…

A: Given data, Stresses are σ1 σ2=σ13 and, σ3=0

Q: Problem Solving: Show your Solution 1. A sculpture weighing 10,000 N rests on a horizontal surface…

A: 1) Weight of sculpture =10000 N h=6 m A=0.20 m2 density =2700 kg/m3 length of segment =3 m

Q: To use Hooke's law and the definitions of stress and strain to calculate unknown values for linear…

A: Part A: Given data, Writing the formula for change in length due to axial load: -

Q: A cylindrical metal specimen 12.7 mm in diameter and 250 mm long is to be subjected to a tensile…

Q: A rubber block with dimensions of 120x120x120 mm is compressed in a rigid mold cavity with a…

Q: The force required to punch a 25 mm hole in mild steel plate 10 mm thick, when ultimate shear stress…

Q: A plastic bar of 53 mm is to be twisted by torques T until the angle of rotation between the ends of…

Q: A copper rod [E= 110 GPa] originally 599 mm long is pulled in tension with a normal stress of 278…

Q: A steel bar is stressed to 280 MPa. The modulus of elasticity is 205 GPa. The bar is 80 mm diameter…

A: Given data : Length (L)=240 mm Modulus of elasticity (E)=205 GPa Diameter (d)=80 mm Stress (σ)=280…

Q: A cylindrical specimen of a nickel alloy having an elastic modulus of 207 GPa and an original…

Q: A bar subjected to a stress of 1 GPa develops an elongation of 5mm. If the initial length of the bar…

Q: A 0.1-in wire that is 10-in long and supports a 100-lb weight stretches a total of 0.1-in. What is…

A: Given question belongs to the subject Strength of materials and can be solved using the concepts of…

Q: To support a tensile load of 65 kN, a circular cross section and A metallic rod with a length of…

Q: A steel wire 30 ft long, hanging vertically, supports a load of 500 lbf. Neglecting the weight of…

A: Given- Load=500 lbf = 2224.11 NStress (σ) = 20,000 psi = 137.9 MPaThe elongation in the bar is zero,…

Q: A 1.25 inch diameter hole is drilled on the centerline of a steel bar 3.5 inches wide by 3/8 inches…

Q: 5. A specimen of Al have a cross section 10×12.7 mm?, pulled with 35,500N, producing elastic…

Q: A pipe has an outside diameter of 3m and an inside diameter of 2.9m. It is acted upon by a tensile…

A: Dear student, According to the guidelines I am allowed to answer only first…

Q: An axial load of 100 kN is applied to a flat bar 20 mm thick, tapering in width from 120 mm to 40 mm…

Q: A composite bar is subjected to a tensile load of 115 kN. Bar 1 is rectangular cross section with…

Q: A metal bar 5.0 m long extends by 0.05 mm when a tensile load is applied to it. The percentage…

Q: Sketch the expected tensile stress versus strain curves for the following:

A: all the three curves are shown in the same stress train diagram so that comparison can be done.

Q: A bar produces a lateral strain of magnitude 60x105 m/m when subjected to a tensile stress of…

Q: Give ONLY the correct answers with their units A. Calculate the axial deformation of a steel rod 20…

Q: A steel bar of 8 mm is heated from 10° C to 25° C and the bar is free to expand. The bar will induce…

A: When a bar is heated, it has a tendency to expand. If it is somehow constrained to expand, there…

Q: Sketch two more stress-strain diagrams, again one for a ductile material and one for a brittle…

A: Stress and strain: Stress is defined as the internal resisting force per unit area; it represents…

Q: To support a tensile load of 65 kN, a circular cross section and A metallic rod with a length of…

A: Given: The tensile load, P = 65 kN The length of rod, L = 0.32 m The stress in the bar, σ = 240 MPa…

Q: Calculate the maximum stress of a cylindrical specimen of steel alloy having an initial diameter of…

A: Initial diameter of the specimen, d=12.55 mm Length of the specimen, L=110mm Tensile force applied…

Q: A punch for making holes in steel plates assumes that having a diameter of 0.75 in. is used to punch…

Q: A copper rod [E= 113 GPa] originally 606 mm long is pulled in tension with a normal stress of 242…

A: GivenE=113 GPaL=606mmσ=242 MPa

Q: round bar of 25mm in diameter undergoes a tensile load of 120kpa. The gage length is 30cm and…

Q: A rubber block with dimensions of 120x120x120 mm is compressed in a rigid mold cavity with a…

Q: For a point on a steel specimen, the principal stresses o of 230 MPa and o2 of 15 MPa are given.…

Q: A 250 mm diameter circle is etched on a 400 mm x 400 mm x 12 mm piece of sheet metal. The elastic…

A: Solution: Given Data: d = 250 mm E=190 GPav=0.3σx=40 MPaσy=75 MPat=12 mm

Question

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

(a) Solve part (a) of the preceding problem if the pressure is 8.5 psi, the diameter is 10 in., the wall thickness is 0,05 in., the modulus of elasticity is 200 psi, and Poisson's ratio is 0.48. (b) If the strain must be limited to 1.01, find the maximum acceptable inflation pressure
The Highest load sustained druing an uniaxial tensile testing experiment is 7,500lb. If the original cross section has a diamter of 0.25in, what is the ultimate tensile strength? (please also make a drawing)
Derive the following equation for computing shear stress in a solid bar along an oblique plane with angle B with respect to the vertical plane. The bar is subjected to centric axial loading. sin 0 cos 0 T = Ao
You are given a square rod of 6061-T6 aluminum (cross-section = 4mm X 4mm, length = 2.3m). The material has a Young’s modulus of 72 GPa. If a tensile load of 3 kN is applied to the ends of the rod (parallel to the 2.3m dimension), what is the applied engineering normal stress?
(Suppose you need to design a tension test machine capable of testing specimens that have nominal ultimate stresses as high as σu = 100 ksi . How much force must the machine be capable of generating? Assume the testing specimen has the ASTM shape shown. Answer for this is 19.6 kip) (If the maximum nominal strain is ϵf = 0.7 just before the test specimen fractures and the test machine operates by moving only one grip, how far must that grip be designed to travel? The total length of the deforming part of the specimen is 3 in. Answer for this is 2.10 in) Do not know if this info is needed but this was the other 2 parts
a)Draw the stress-strain curve of a ductile material such as that of a ductile steel and discuss the various regions of the curve. Explain the difference between a ductile and brittle material and the concept of ductility and its measurement. b)A machine part 10 mm thick, having the dimensions shown in the figure, is to be subjected to cyclic loading. If the maximum stress is limited to 60 MPa, determine the allowable force P. Approximate the stress concentration factors form the graph given. Where might a potential fracture occur?
Example: Convert the change in length data in Table 3-2 to engineering stress and strain and plot a stress-strain curve Homework- help Table 3-2 The results of a tensile test of a 0.505 in. diameter aluminum alloy test bar, initial length (1o) = 2 in. Calculated LTO Load (Ib) Change in Length (in.) Stress (psi) Strain (in./in.) 0.000 1000 0.001 0.0005 4,993 14,978 24,963 34,948 37,445 39,442 39,941 39,691 37,944 3000 0.003 0.0015 5000 0.005 0.0025 7000 0.007 0.0035 7500 0.030 0.0150 7900 0.080 0.0400 8000 (maximum load) 0.120 0.0600 7950 0.160 0.0800 7600 (fracture) 0.205 0.1025
A. Calculate the axial deformation of a steel rod 20 cm long, 10 cm diameter. If an axial loading 300 MPa is applied at the end. B. If the cross-sectional is square with t=10 mm, is the deformation will be higher or lower. (use E=200 GPa) * Vour onouIor
In the attached picture there is a sketch of a socket wrench. Assume the wrench is held at a fixed point “A”. The yield stress of the material is known to be 500 MPa. Answer the questions below Describe the stresses at point “A” and their causes and calculate the stresses. Determine the factor of safety against yield assuming the Tresca yield criteria. Determine the factor of safety against yield assuming the von Mises yield criteria using both principal stresses and “Cartesian” stresses. Do your values match or not, and is this expected? Explain. Do the calculated values make sense with the respect to the Tresca value? Explain, why or why not?
A tensile stress is applied along the long axis of a cylindrical brass rod thathas a diameter of 10 mm. Given the Poisson’s ratio for brass is 0.35,determine the magnitude of the load required to produce a 2.5 x 10-3 mmchange in diameter if the deformation is entirely elastic. Take the Young’sModulus (E) for brass as 10.1x104 MPa.
A sample test rod made of a ferrous material of 0.5 in. diameter was tested for tensile strength with the gauge length of 2.5 in. The following observations were recorded: Final length = 3.15 in; Final diameter = 0.275 in; Yield load = 7650 lb. and Ultimate load = 10375 lb. (a) Calculate: 1. yield stress, 2. ultimate tensile stress, 3. percentage reduction in area, and 4. percentage elongation. (b) What specific material, if any, is similar to this tested rod? Refer to AT7 and AT8. (c) This same material is then used as a tension member 55 inches long and is subjected to a maximum load of 6000 lb, repeated but not reversed. (d) Solve part (c) if the total elongation is not to exceed 0.025 in.? 1. %3D
A stress-strain diagram for a tension test of an alloy steel sample is shown in the diagram below. The initial sample diameter is 0.502”, the diameter of the fractured sample is 0.412”, the original gage length is 2.00” and the final length after fracture is 2.78”. Determine/ calculate the following: (a) The stress at the proportional limit. (b) The modulus of elasticity (E). (c) The yield stress using the 0.2% offset method. (d) Theultimatetensilestrength. (e) The rupture stress. (f) The percent reduction in area. (g) The percent elongation. (h) Is the material considered ductile or brittle?