Question 2 3.1. Groundwater is usually considered to be very pure. However,associated with groundwater quality.1. Hardness2. Organic content3. Suspended solids4. Virus BOD2. Rate constant in the BOD test is depend on1.2.3.DecPool of choices:No changeWrite the appropriate choices from the given pool of choices.a. Total Coliform Ruleis a common problemroblem inb. Stage 2 Disinfection and Disinfection By-Product RuleA. To control microbial contaminantsB. To reduce exposure to disinfection by-productsC. Five HaloaceticacidsD. Water corrosivityE. Total trihalomethanesF. VirusesG. To further reduce exposure todisinfecton by-productsH. Fecal coliformI. BromateJ. ChloriteK. Volatile organic contaminants

We need to write factors on which rate constant in BOD test depends.

Answered: 2. Rate constant in the BOD test is…

Engineering

Civil Engineering

2. Rate constant in the BOD test is depend on 1. 2. 3.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Please make presentation about this question How to determine chlorides in a water sample.? Presentation should include the following: Theory Significance Guidelines Apparatus / Chemicals Used Procedure
For each of the following indicate if the designated technology is appropriate for the indicated water-quality problem. Explain why or why not (answer in no more than a few sentences). i. Lime treatment for iron. j. Suspended sediment removal in a vigorously mixed fully-mixed tank.
PART II: A T TERBERG LIMITS PROBLEM A The following data shows the results of the Liquid limit and Plastic limit LIQUID LIMIT TEST TEST NO. 1.0 2.0 3.0 4.0 No. of Blows (N) Mass of Wet Soil + Mass of Container (g) Mass of Dry Soi1 + Mass of Container (g) 38.0 24.0 21.0 16.0 23.24 20.19 22.27 24.12 20.44 19.78 18.75 21.10 Mass of container (g) 12.74 13.24 13.06 13.27 PLASTIC LIMIT TEST TEST NO. 1.0 2.0 1. Determine the nearest No. of Blows (N) Mass of Wet Soil + Mass of Container (g) Mass of Dry Soil + Mass of Container (g) value of liquid limit (LL). 2. Determine the nearest value of plastic limit 24.52 22.84 21.42 21.59 13.07 13.18 (PL). 3. Determine the nearest value of plastic index NATURAL WATER CONTENT (PI) and its soil 1.0 2.0 description. 4. Determine the nearest value of liquid index, TEST NO. No. of Blows (N) 18.53 17.97 (LI) and its soil Mass of Wet Soil + Mass of Container (g) Mass of Dry Soil + Mass of Container (g) 15.54 15.56 description. 7.84 7.50
At a water treatment plant, the coagulation-sedimentation unit clarifies 50 MLD of water sample. The quantity of alum required at the plant is 20 mg/1. The alkalinity of raw water is 5 mg/1 as CaCO3. Find out the quantity of quicklime required on yearly basis at the plant.
Ql: 1-For the following data, calculate the total available water and the soil moisture deficit. Soil depth (em) WwP W 0 - 40 1.38 0.31 0.13 0.23 40 - 100 1.38 0.29 0.12 0.26
sanitary engineering laboratory Test " Conductivity and TDS " Same Question pleas help to solution 1-What are the potential sources of error in this analytical determination How could they be overcome?2- What are alternative methods for determining the TDS of aqueous samples?3- What are typical conductivity and TDS values of drinking water in Jordan? How do your data compare with these values?4- What are the main sources of TDS in water and wastewater?5-What are the potential health and environmental effects if any of extreme TDS values?6- What is the common conductivity reading for deionized, distilled, drinking and waste water?
HELP ME
1. (a) Groundwater at 10°C equilibrates with calcite (CaCO,) in an atmosphere that has a CO, partial pressure of 101 atm. What is the pH, [Ca"), total alkalinity and [HCO,] of the groundwater? (b) If a sample of the water in part (a) is equilibrated with Pco2 = 1035 atm and CaCco, how much Caco; precipitates (or dissolves)? What is the new pH, [Ca"], total alkalinity and [HCO, ]?
up to 120221 (Compatibility Mode] - Word References Mailings Review View Help Nitro Pro V Tell me what you want to do A A Aa E E-E EE T T 2 T AaBbCcl AaBbCcI AABBCCI A A、ッ、A 前,, Emphasis T Heading 1 I Normal Paragraph Styles 1. Q. The following results were obtained from a CBR test on a compacted subgrade soil. Calculate the CBR value for the soil. Do you recommend to use it as subbase? Illustrate your answer? Penetration (mm) Load (KN) 0.625 0.15 1.25 0.18 1.875 0.40 2.5 0.73 3.75 1.32 1.80 7.5 2.34 10 2.53 12.5 2.91 Standard Loads: 2.5 mm .... .13.36 KN 5.0 mm 19.96 KN tes) lenovo
Water treatment plant : SOR = 0.35 mm/sec; The analysis of this water found that there are 6 different particle sizes: 0.1 mm with settling velocity of 0.2 mm/sec; and percentage of particles = 10 %; 0.2 mm with settling velocity of 0.25 mm/sec; and percentage of particles = 20 %; 0.3 mm with settling velocity of 0.3 mm/sec; and percentage of particles = 15 %; 0.4 mm with settling velocity of 0.35 mm/sec; and percentage of particles = 5 %; 0.5 mm with settling velocity of 0.4 mm/sec; and percentage of particles = 30 %; 0.6 mm with settling velocity of 0.5 mm/sec; and percentage of particles = 20 %; Calculate the efficiency of this tank ?
The following analysis has been obtained for a lake water sample. Please indicate the alkalinity (a), total hardness (b), carbonate (c) and non-carbonate hardness (d) for this sample. Is this water hard (type: 1 for YES, 2 for NO) (e)? Also, estimate the percent reliability of the analysis (f). Answers a, b, c, and d in units of mg/L CaCO3. All answers with 3 significant digits, except for (e). (Tip: use %diff=((X-Y)/(X+Y))*100) lons in solution Concentration (mmol/L) Molecular mass (mg/mmole) 96.1 So. Co, Ch NO HCO Na 0.567 0.006 60.0 1.561 35.5 0.567 62.0 2.674 61.0 0.94 23.0 K* 1.221 39.1 Ca? 2.043 40.1 Mg2 Zn² 1.322 24.3 0.045 65.4 a) : b) d) ;e) ; f)
State the two major purposes of sludge stabilization.