00 x 200 mm ammonia compressor with a compression efficiency of 82% operates with a suction pressure of 291.57 kPPa and a condenser pressure of 1203.7 kPa at 22 rps. The refrigerant cools 100 kg/min of water from 250C to 20C and assuming 5% of the useful refrigerating effect is lost due to the process of cooling, determine: a) RE in tons of refrigeration h2 = 1653 kJ/kg b) mass flow rate of ammonia c) actual work of compression kW

00 x 200 mm ammonia compressor with a compression efficiency of 82% operates with a suction pressure of 291.57 kPPa and a condenser pressure of 1203.7 kPa at 22 rps. The refrigerant cools 100 kg/min of water from 250C to 20C and assuming 5% of the useful refrigerating effect is lost due to the process of cooling, determine: a) RE in tons of refrigeration h2 = 1653 kJ/kg b) mass flow rate of ammonia c) actual work of compression kW

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter45: Domestic Refrigerators And Freezers

Section: Chapter Questions

Problem 2RQ: The operating condition for the single compressor in a household refrigerator is the lowest box...

See similar textbooks

Similar questions

Why is two-stage compression popular for extra-low-temperature refrigeration systems?
What are the approximate temperature ranges tor low-, medium-, and high-temperature refrigeration applications?
Welded ______sealed compressors are normally used in household refrigerators.
The operating condition for the single compressor in a household refrigerator is the lowest box temperature, which is typically A. 0F B. -20F C. 20F D. 40F
The function of the pressure tank in an open-loop, geo-thermal heat pump well system is to prevent the well pump from _____.
2. A refrigeration system with a capacity of 15 tons of refrigeration, operates at 150 kPa in the evaporator, while the condenser is 1450 kPa. If refrigerant R-717 is saturated, calculate the theoretical power required to operate the compressor. Compressor Power = Answer kW.
Q2/ In simple refrigeration system uses R134a, the evaporator pressure is 0.25 MPa and the condenser pressure is 1. MPa. The evaporator load is 25 TR. Determine the required work to operate the compressor motor in (a) kW, (b) hp. What is the displacement volume of the compressor if the volumetric efficiency is 80%
a cooling system with a capacity of 10 tons of refrigeration, operates at 210 kPa in the evaporator, while in the condenser is 1100 kPa. if refrigerant R-717 is saturated, calculate the theoretical power required to operate the compressor. compressor power = .... kW
The catalogue for a refrigerant 22, four-cylinder, hermetic compressor operating at 29 r/s. a condensing temperature of 40 °C and an evaporating temperature of -4 °C shows a refrigeration capacity of 96.4 kW. At this operating points the motor (whose efficiency is 90 percent) draws 28.9 kW. The bore of the cylinders is 87 mm and the piston stroke is 70 mm. The performance data are based on 8 °C of subcooling of the liquid leaving the condenser. Compute 3.1 the actual volumetric efficiency and 3.2 the compression efficiency.
There are removed 3.06 m^3 /s of vapor from the water evaporator of a vacuum refrigeration system: thewarm water enters the evaporator at 18 o C and chilled water leaves at 10 o C, make-up water enters at29 o C. Determine the refrigerating capacity
For R-410A refrigerant, which operates at a flow rate of 0.102 kg/s. It is known that saturated vapor enters the compressor at -40ºC and that saturated liquid leaves the condenser at 0ºC. The refrigerant operates in the saturation region. Determine: a) The compression power. b)The cooling power. c) The coefficient of performance.
A two-stage refrigeration system operates with ammonia refrigerant flowing at the rate of 15 kg/min through the evaporator. The saturation temperature in the condenser and evaporator units have been noted to be 40⁰C and - 15⁰C respectively. If the system has intercooling by liquid refrigerant at 4.25 bar, determine (a) The capacity and COP of the system. (b) How will these parameters be affected if the compression is carried out in a single stage unit ; the operating temperature limits remaining the same? Use the p-h chart and property tables for saturated ammonia refrigerant