Three generating units within a power plant aresynchronized and supplying power to the main grid. Thetable below shows the respective capacities, initialloading and %droop of each generator for a gridfrequency of 60 Hz.Generator#G1G2G3SpeedDroop3%4%5%Capacity(MW)50100150Total 300 MWInitial Loading(MW)2060120200 MW1. What will be the output of G2 if the grid frequency dropsby 0.3 Hz?62. What will be the total output of the power plant if the gridfrequency dropped from 60 Hzto 59.8 Hz?3. What value of grid frequency will cause G1 output toincrease from 20 MW at 60 Hz to 25 MW?4. What value of grid frequency will cause the total plantoutput to decrease by 50 MW?

Since you have posted a question with multiple sub-parts, we will solve the first three sub-parts…

Three generating units within a power plant are synchronized and supplying power to the main grid. The table below shows the respective capacities, initial loading and %droop of each generator for a grid frequency of 60 Hz. Generator # G1 G2 G3 Speed Droop 3% 4% 5% Capacity (MW) 50 100 150 Total 300 MW Initial Loading (MW) 20 60 120 200 MW 6 1. What will be the output of G2 if the grid frequency drops by 0.3 Hz? 2. What will be the total output of the power plant if the grid frequency dropped from 60 Hz to 59.8 Hz? 3. What value of grid frequency will cause G1 output to increase from 20 MW at 60 Hz to 25 MW?

Three generating units within a power plant are synchronized and supplying power to the main grid. The table below shows the respective capacities, initial loading and %droop of each generator for a grid frequency of 60 Hz. Generator # G1 G2 G3 Speed Droop 3% 4% 5% Capacity (MW) 50 100 150 Total 300 MW Initial Loading (MW) 20 60 120 200 MW 6 1. What will be the output of G2 if the grid frequency drops by 0.3 Hz? 2. What will be the total output of the power plant if the grid frequency dropped from 60 Hz to 59.8 Hz? 3. What value of grid frequency will cause G1 output to increase from 20 MW at 60 Hz to 25 MW?

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

Figure below shows a power system. The rating of generators and transformers are:G1:25MVA, 6.6KV, jO.2 p.u. G2:15MVA, 6.6KV, jo.15 p.u. G3:30MVA, 13.2KV, jo.15 p.u. T1: 30MVA, 6.6A- 115Y KV, jo.1 p.u.T2: 15MVA, 6.6A- 115Y KV, jo.1 p.u. T3:single phase units each rated 10MVA, 69/ 6.9 KV, jo.1 p.u. Find te reactances in p.u, take a base of 30MVA, 6.6 KV in the circuit of G1 .=.XG1 G2} 4 A lubu T2 T1 T3 G1 G3 j120 2 j90 N
A generating system contains three 20 MW generating units each with a 3% FOR and one 45 MW unit with a 6% FOR. If the peak load for a 100 day period is 75 MW, what is the LOLE and EIR for this period? Assume the appropriate load characteristic is a straight line from the 100% to the 60% points.
The reactance of a generator is given as 0.25 per-unit based on the generator’s of 18 kV, 500 MVA. Find its per-unit reactance on a base of 20 kV, 100 MVA. a. 0.0505 b. 0.0605 c. 0.0405 d. 0.0606
The one-line diagram of a simple power system is shown in Figure below. The neutral of each generator is grounded through a current-limiting reactor of 0.25/3 per unit on a 100-MVA base. The system data expressed in per unit on a common 100-MVA base is tabulated below. The generators are running on no-load at their rated voltage and rated frequency with their emfs in phase. G Stark Item Base MVA Voltage Rating X' x² 20 kV 20 kV 20/220 kV 20/220 kV 100 0.05 0.15 0.15 0.10 0.10 220 kV 0.125 0.125 0.30 0.15 0.25 025 0.7125 0.15 100 100 0.15 0.05 0.10 0.10 0.10 100 0.10 100 100 Lu La 220 kV 0.15 220 kV 0.35 100 A balanced three-phase fault at bus 3 through a fault impedance Zf= jo.I per unit. The magnitude of the fault current in amperes in phase b for this fault is: Select one: A. 345.3 B. 820.1 C. 312500 3888888 产产

In the system shown in Figure 1, the transformers are connected star-star with both star points grounded and the generators are connected in star with thier star points grounded. The system base is 15 MVA. The transformers all have reactances of 0.04 p.u. on this 15 MVA base. The reactances of all other elements are given in Table 1 (in 2) and the voltage levels are given in Table 2. p.u. G1 p.u. T1 jö Per-Unit Convert all values to p.u. on a 15 MVA base. Xa= p.u. Xc₂= XL = V BABE G1 2 X 9 T3 Figure 1: A section of the distribution system T1 L Table 1: Sequence reactances (2) 3 G1 L G2 0.3 0.59 0.01 4 L 9/10 10 Fault Voltage What is the voltage at bus 3 (in Volts) after the fault has occurred? Vp= V T2 5 T2 34 10/4 Table 2: Voltage bases (kV) G2 4 T3 10/9 | G2 Fault Current A three-phase fault with a fault reactance of 0.01 p.u. occurs at bus 3. Calculate the fault current flowing at the fault point in KA. Ip=-j KA So
6. A 3 phase fault occurs at point F as shown in figure. Determine the critical clearing anglefor the system. The generator is delivering 1.0 p.u power under prefault conditio
The power factor of the system is?????
e = 0 Q1: What does happen if we change two currents? a. Q2: What does happen if we have a three-phase four poles machine? Q3: What does happen if we have a two-phase two poles machine? e = 0 Q4: What does happen if we apply a capacitance in phase b and then use same voltage for both phase. Dr. Ali Ki. pw --
Two 60MVA, alternators operate in parallel. The setting of the governor are such that the rise in speed from full load to no load is 2% in one machine and 3% in the other, the characteristics being straight lines in both cases. If each machine is fully loaded when the total load is 120MW, what will be the load on the first machine (with 2% speed regulation) when the total load is reduced to 80MW?
Two 50-MVA, 3-phase alternators operate in parallel. The settings of the governors are such that the rise in speed from full-load to no-load is 2 percent in one machine and 3 percent in the other, the characteristics being straight lines in both cases. If each machine is fully loaded when the total load is 100 MW, what would be the load on each machine when the total load is 60 MW? (Req'd) Draw an appropriate diagram.
A generator is rated 100 MVA, 22 kV. Its Y connected windings have areactance of 1.1 per unit. Find the reactance of the winding. Then find a new per unit value of reactance of the generator for 100 MVA and 20 kV.
Q2\ Two generators G1 & G2 are rated 15 MVA, 11 kV and 10 MVA, 11 kV respectively. The generators are connected to a transformer as shown in the following figure. Find the sub- transient current in each generator when a three-phase fault occurs on the high voltage side of the transformer. A/Y 15 MVA, 11 kV, X"gl=j0.10 pu G2 15 MVA, 11/66 kV, Xr-j0.06 pu 10 MVA, 11 kV, X"g2-j0.10 pu