A cylindrical metal rod of 20mm diameter and 1m length is subjected to a tensile load of 60KN. To what length the cylinder should be centrally bored on one side to reduce weight by material removal, so that the total extension will increase by 10 percent under the same pull. The diameter of the hole being bored on

A cylindrical metal rod of 20mm diameter and 1m length is subjected to a tensile load of 60KN. To what length the cylinder should be centrally bored on one side to reduce weight by material removal, so that the total extension will increase by 10 percent under the same pull. The diameter of the hole being bored on

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter8: Applications Of Plane Stress (pressure Vessels, Beams, And Combined Loadings)

Section: Chapter Questions

Problem 8.2.1P: A spherical balloon is filled with a gas. The outer diameter of the balloon is 20 in. and the...

See similar textbooks

Similar questions

3. A cylindrical metal rod of 50mm diameter and 3m length is subjected to a tensile load of 150KN. To what length the cylinder should be centrally bored on one side to reduce weight by material removal, so that the total extension will increase by 20 percent under the same pull. The diameter of the hole being bored on one side is equal to 25mm. Take E= 200GPa.
A tensile force of 100 kN is applied on a 0.02-m diameter and 2-m long rod. After applying the load, the diameter of the rod decreases to 0.01998 m and the length increases to2.01 m. The true axialstrain is?
A copper rod of diameter 10 mm and length 4 m has a tensile force of 5 kN applied on it . Modulus of Elasticity of Copper is 96 GPa. Calculate the stress in MPa and extension in mm .
Given a 2m-length rod with 23.0 mm diameter what is the actual stress (in MPa) if axial load is 10.4 kN.
Let's considera rod having a solid circular cross-section with diameter of 4 mm and it is made of a material having a Young's modulus E= 200 Gpa and a Poisson's ratio of 0.3. If a tensile force Fis subjected to that rod cross-section, the diameter becomes 3.995 mm. determine the applied force F Select one: OF 5236 N O F=15708 N Clear mopshoe Finish attempt
10-mm-diameter rod of 3003-H14 aluminium alloy is subjected to a 6-kN tensile load. Calculate the resulting rod diameter. Calculate the diameter if this rod is subjected to a 6-kN compressive load, given that the elastic modulus =70 GPa and poisson ratio=0.33
You are in charge of designing a new fixture for a “universal testing machine” that will attach a tensile specimen to the machine using a clevis—a U-shaped piece with holes drilled through the two arms—and a cylindrical pin that passes through the clevis and the specimen. If the maximum load exerted by the machine is 30 kN and the pin is to be made of some sort of steel, what is the minimum pin diameter needed to ensure that the shear stress in the pin does not exceed 600 MPa? Assume that the steel has similar elastic properties to pure Fe.
A steel rod 4m long and 20mm diameter is subjected to an axial tensile load of 45kN. Find the change in length, diameter and the volume of the rod. Take E = 2 x 105 N/mm2 and Poisson's ratio = 0.25
An eye bolt carries a tensile load of 20 kN. Find the size of the bolt , if the tensile stress is not to exceed 100 MPa.
What wall thickness in mm is required for a 634 mm diameter cylinder under an internal pressure of 18 MPa? Use a design stress of 80 MPa?
See the set of bars for made of a material that has a yield strength of 350 MPa, determine the minimum h1 and h2 dimensions required. Apply a safety factor F.S. = 1.5 without flow. Each bar is 12 mm thick
Q.3 A flat plate of width 60mm has a central hole of 10mm diameter. This plate is subjected to an axial load of PKN (tensile). Determine the thickness of plate if o,-300Mpa for plate material and FOS=3. Take P as 5KN, 6KN, 7KN, 8KN, 9KN, 11KN.