A cylindrical rod of copper (E = 110 GPa, 16 ´106 psi) having a yield strength of 240 MPa (35,000 psi) is to be subjected to a load of 6660 N (1500 lbf). If the length of the rod is 380 mm (15.0 in.), what must be the diameter to allow an elongation of 0.50 mm (0.020 in.)?

A cylindrical rod of copper (E = 110 GPa, 16 ´106 psi) having a yield strength of 240 MPa (35,000 psi) is to be subjected to a load of 6660 N (1500 lbf). If the length of the rod is 380 mm (15.0 in.), what must be the diameter to allow an elongation of 0.50 mm (0.020 in.)?

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter2: Axially Loaded Members

Section: Chapter Questions

Problem 2.3.21P: A slightly tapered bar AB of solid circular crass section and length L is supported at end B and...

See similar textbooks

Related questions

Q: A prismatic bar with a circular cross section is loaded by tensile forces P 65kN. The bar has length…

A: Given, Initial length of the bar, Li=1.75 m Initial diameter of the bar, di=32 mm=0.032 m Applied…

Q: A sheet of metal was deformed elastically under balanced biaxial tension (ox = Oy, 0z = 0) A. Derive…

Q: A steel [E = 200 GPa] rod with a circular cross section is 7.5-m long. Determine the minimum…

Q: The bar shown in the following figure has a diameter of 40 mm and is subjected to a force P = 4500 N…

A: The Point A will be subjected to tensile stress due to bending stress generated by force F.bending…

Q: 2m 1.5 m 0.5 m 0.5 m 56m y A a.) A 1.5 m length of 30mm diameter solid steel bar fixed at one end is…

A: Given: The length of solid steel bar, L = 1.5 m The diameter of solid steel bar, d = 30 mm = 0.03 m…

Q: 8. A steel bar of 40mm x 40mm square cross-section is subjected to an axial compressive load of…

A: Answer: The elongation of the bar will be ◆ When 30mm × 30mm square section : 2.22 mm. ◆ When 40mm…

Q: A solid copper bar of circular cross sectionhas length L =1.25 m and shear modulus of elasticityG =…

A: Shaft is designed on the basis of following two criteria:- Strength Criteria According to Strength…

Q: An elevator weighs 1000 lbs and is supported by a 5/16 inch diameter cable, 1500 ft long. When the…

Q: Find out the crippling stress of the column if E=2×105N/mm2 . Also, find out the shortest length of…

A: Given: Fix-hinge support do=40 mm=0.04 mdi=20 mm=0.02 mL=5 mE=2×105 N/mm2σy=250 N/mm2 To determine:…

Q: 3. A 5.0 meter tall steel column with a rectangular cross section of 100mm by 80mm has fixed ends…

Q: Rigid bar ABCD is loaded and supported as shown. Steel [E = 31300 ksi] bars (1) and (2) are…

Q: A rod of copper originally 305 mm long is pulled in tension with a stress of 276 MPa. If the modulus…

A: Given, Length of rod = L = 305 mm Stress in rod = σ = 276 MPa = 276 N/mm2 Modulus of elasticity = E…

Q: For two plates 1 and 2 a riveted system is suggested to connect them. W thickness of plate. 1 is 12…

Q: A solid aluminum [E = 70 GPa; a = 22.5 × 10-6/°C] rod (1) is connected to a solid bronze [E = 100…

Q: The cross-sectional area of the bar is 5 cm². Use E = 70 GPa for aluminum, and E = 200 GPa for…

Q: a) The material is 2024-T4 aluminum with a yield strength of 47 ksi b) The rod length L=6 in and arm…

Q: An aluminum [E = 10,000 ksi] control rod with a circular cross section must not stretch more than…

Q: To determine the maximum allowable axial force applied to a cylindrical column by four different…

A: Given :

Q: At temperature of 25oC, a 17 m rod 8 mm in diameter is subjected to a tensile load of 24 kN. At what…

Q: 7. A SAE steel column has a circular cross-section of 16 mm in diameter and a length of 320 mm. The…

Q: he bar shown in the following figure has a diameter of 20 mm and is subjected to a force P = 2750 N…

A: Given:d=20 mmP=2750 NF=14000 NSyt=480 MPaPoint A will be subjectd to tensile stress due to bending…

Q: Rigid bar ABCD is loaded and supported as shown. Steel [E = 28600 ksi] bars (1) and (2) are…

A: Given data: A1=0.67 in2A2=0.32 in2ε1=810 μ Need to determine the stresses in bars 1 and 2, vertical…

Q: Wire radius, r =15 mm R=90 mm G=8Y Gpa A=? J=? F= 1.X kN T=? Tr =? Ta =? Tr =? T =? Na=15 turns…

A: Helical spring Helical springs are the thick spring wires coiled into a helix. Helical springs are…

Q: A spherical tank contains an internal pressure of 3.0 MPa, the diameter is 16 m, the yield stress…

Q: Tem 9.8 A thin cylinder of 300 mm internal diameter and 12 mm thickness is subjected to an internal…

Q: 3. The load at point B is 28 kN. Members AB is a Kelvin-Voigt composite bar, (E = 25 GPa, u = 5 x…

A: Data given- Load at point B = 28kN For member AB E = 25 Gpa u = 5×1015 Pa-s For member AC,BC E = 150…

Q: ke diameter of t

Q: Situation 11: As shown in the Figure, three steel wires, each 0.05in? in area, are used to lift a…

Q: 4. A steel bar of 40 mm x 40 mm square cross-section is subjected to an axial compressive load of…

A: Given, Cross sectional area = A = 40 mm x 40 mm = 1600 mm2 Axial compressive load = P = 200 kN = 200…

Q: A solid aluminum [E = 70 GPa; a = 22.5 × 10-6/°C]rod (1) is connected to a solid bronze [E = 100…

A: E1 = 70 GPa = 70 X 103 N/mm2 a1 = 22.5 x 10-6 /C E2 = 100 GPa = 100 x 103 N/mm2 a2 =16.9 x 10-6 /C…

Q: A cylindrical rod of steel (E = 207 GPa, 30 × 106 psi) having a yield strength of 310 MPa (45,000…

A: As per given question Load=11100 Length =500mm Elongation =0.38mm E=207 We have to what must be the…

Q: A steel panel is subjected to a compressive loading in order to improve the panel stiffness and to…

A: Given:- F=400kips V= 0.20 E=2.8x107psi

Q: (25) A shaft with a circular cross section is comprised of a relatively brittle material. The shaft…

Q: QUESTION 1 A punch shown in Figure 1 is used to make a hole in a metal plate with thickness h3. The…

Q: A bar of 1000 mm length and 40 mm diameter is cen- trally bored for 300 mm length at one end at a…

Q: A cylindrical rod of copper (E = 110 GPa, 16 × 106 psi) having a yield strength of 240 MPa (35,000…

A: Given data: E=110 GPaσy=240 MPaF=6670 NL=390 mmδ=0.5 mm Need to determine the diameter of the rod.

Q: Aluminum Rod Allowable tension stress 100 Mpa Cross section 30 x 5 mm L = 500 mm E- 70 GPa Steel Rod…

A: Given data: Figure with relevant details To determine: Maximum allowable load such that rigid bar…

Q: B/A cylindrical piece of carbon-steel with dimension of 100 mm length and 10 mm diameter exposed to…

Q: The cylindrical rod is made of steel with E = 30000 ksi and u = 0.3. P 10 kips d Id = lin. L=4 ft AL…

A: Option c is correct. Here negative sign shows that final diameter is lesser than initial diameter.

Q: A thin cylindrical shell with D/t ratio equal to 40 subjected to an internal pressure of 2 N/mm. The…

Q: 9. A solid circular rod that is 600 mm long and 20 mm in diameter is subjected to an axial force of…

A: Given Data P=50 kN D=20 mm L=600 mm ∆=1.4 mm D'=19.9837 mm

Q: The bar shown in the following figure has a diameter of 40 mm and is subjected to a force P = 3500 N…

Q: 2. A core made of stainless steel (material 1, E, = 28 Msi) is fully bonded to an inner shell of…

Q: The rigid bar AC is supported by two axial bars (1) and (2). Both axial bars are made of bronze [E =…

A: Givenbar material →bronzeE=100Gpaα=18×10-6mm/mmοCA1=180mm2A2=380 mm2L1=1290 mmL2=2000 mma=590…

Q: 3. A 5.0 meter tall steel column with a rectangular cross section of 100mm by 80mm has fixed ends…

Q: The rigid bar AC is supported by two axial bars (1) and (2). Both axial bars are made of bronze [E =…

Q: Compare the torsional rigidities of the following sections: (a) a hollow tube 30 mm outside…

A: Since we only answer up to 3 sub-parts, we’ll answer the first 3. Please resubmit the question and…

Q: A cylindrical rod of diameter 10 mm and length 1.0 m is fixed at one end. The other end is twisted…

Q: A steel bar 40 mm x 40 mm square cross-section is subjected to an axial compressive load of 200 kN.…

A: Data given- A = 40 mm × 40 mm = 1600 × 10-6 m2 P = 200 × 103 N L = 2 m E = 200 × 109 Pa

Concept explainers

Conduction and Convection

When energy travels from one object to another it is said to have undergone heat transfer. Heat transfer is nothing but the transfer of thermal energy or internal energy from one thing to another, like e.g., when a vessel with water, kept on top of a burner, heats up because of the flame underneath it.

Question

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

The rails of a railroad track are welded together at their ends (to form continuous rails and thus eliminate the clacking sound of the wheels) when the temperature is 60°F. What compressive stress ?? =6.5×10-6 /? is produced in the rails when they are heated by the sun to 120"F if the coefficient of thermal expansion a = the modulus of elasticity E = 30 × 106 psi?
A slightly tapered bar AB of solid circular crass section and length L is supported at end B and subjected to a tensile load P at the free end A. The diameters of the bar at ends A and B are dAand dB. respectively. Determine the length of the bar if the elongation of the bar due to the load P = 45 kips is 0.02 in. Assume that E = 10,400 ksi.
A high-strength steel bar used in a large crane has a diameter d = 2.00 in. (sec figure). The steel has a modulus of elasticity E = 29 × 10 psi and Poisson’s ratio is v = 0.29. Because of clearance requirements, the diameter of the bar is limited to 2.001 in. when it is compressed by axial forces. What is the largest compressive load Pmaxthat is permitted?
Solve the preceding problem if the internal pressure is 3,85 MPa, the diameter is 20 m, the yield stress is 590 MPa, and the factor of safety is 3.0. (a) Determine the required thickness to the nearest millimeter. (b) If the tank wall thickness is 85 mm, what is the maximum permissible internal pressure?
Rigid bar ACB is supported by an elastic circular strut DC having an outer diameter of 15 in. and inner diameter of 14.4 in. The strut is made of steel with a modulus elasticity of E = 29,000 ksi. Point load P = 5 kips is applied at B. Calculate the change in length of the circular strut DC. What is the vertical displacement of the rigid bar at point B?
A wine of length L = 4 ft and diameter d = 0.125 in. is stretched by tensile forces P = 600 lb. The wire is made of a copper alloy having a stress-strain relationship that may be described mathematically by =18,0001+30000.03(=ksi) in which is nondimensional and has units of kips per square inch (ksi). (a) Construct a stress-strain diagram for the material. (bj Determine the elongation, of the wire due to the Forces P. (c) IF the forces are removed, what is the permanent set of the bar? (d) If the forces are applied again, what is the proportional limit?
A prismatic bar in tension has a length L = 2.0 m and cross-sectional area A =249 mn2. The material of the bar has the stress-strain curve shown in the figure. Determi ne t he elongation 5 of the bar for each of the following axial loads: P = 10 kN, 20 kN, 30 kN, 40 kN. and 45 kN. From these results, plot a diagram of load P versus elongation 5 (load-displacement diagram).
Two steel wines support a moveable overhead camera weighing W = 28 lb (see figure part a) used For close-up to viewing of field action at sporting, events. At some instant, wire I is at an angle a = 22° to the horizontal and wire 2 is at angle fi = 40°. Wires I and 2 have diameters of 30and 35 mils, respectively. (Wire diameters are often expressed in mils; one mil equals 0.001 in.) (a) Determine the tensile stresses s and s2 in the two wires. (b) If the stresses in wires 1 and 2 must be the same, what is the required diameter of wire 1 ? (c) To stabilize the camera for windy outdoor conditions, a third wire is added (see figure part b). Assume the three wires meet at a common point coordinates (0, 0. 0) above the camera at the instant shown in figure part b. Wire I is attached to a support at coordinates (75 ft, 48 ft, 70 Ft). Wire 2 is supported at (-70 ft. 55 ft, 80 Ft). Wire 3 is supported at (-10 ft. -85 Ft, 75 ft). Assume that all three wires have a diameter of 30 mils. Find the tensile stresses in all three wires
-7 A steel tube (G = 11.5 x 106 psi) has an outer diameter d2= 2.0 in. and an inner diameter dt=1,5 in. When twisted by a torque 7", the tube develops a maximum normal strain of 170 x 10-6. What is the magnitude of the applied torque T?
A joint between two glass plates A and B is filled with a flexible epoxy that bonds securely to the glass. The height of the joint is/p = 0.5 in, its length is L = 30 in, and its thickness is/ = 0.5 in. Shear force of I' = 25 kips is applied to the joint. Calculate the displacement of the joint if the shear modulus of elasticity G of the epoxy is 100 ksi. Calculate the average shear strain in the epoxy.
Three round, copper alloy bars having the same length L but different shapes are shown, in the figure. The first bar has a diameter d over its entire length, the second has a diameter d over one-fifth of its length, and the third has a diameter d over one-fifteenth of its length. Elsewhere, the second and third bars have a diameter Id. All three bars are subjected to the same axial load P. Use the following numerical data: P = 1400 kN, L = 5m,d= 80 mm, E= 110 GPa. and v = 0.33. (a) Find the change in length of each bar. (b) Find the change in volume of each bar.
A hollow, circular, cast-iron pipe (Ec =12,000 ksi) supports a brass rod (Ec= 14,000 ksi} and weight W — 2 kips, as shown. The outside diameter of the pipe is dc= 6 in. (a) If the allowable compressive stress in the pipe is S00O psi and the allowable shortening of the pipe is 0.02 in., what is the minimum required wall thickness trmm? (Include the weights of the rod and steel cap in your calculations.) (b) What is the elongation of the brass rod Srdue to both load Wand its own weight? (c) What is the minimum required clearance h?