Solutions for EBK POWER SYSTEM ANALYSIS AND DESIGN
Problem 3.1MCQ:
The Ohms law for the magnetic circuit states that the net magnetomotive force (mmf) equals the...Problem 3.2MCQ:
For an ideal transformer, the efficiency is (a) 0 (b) 100 (c) 50Problem 3.3MCQ:
For an ideal 2-winding transformer, the ampere-turns of the primary winding, N1I1 is equal to the...Problem 3.5MCQ:
For an ideal 2-winding transformer, an impedance Z2 connected across winding 2 (secondary) is...Problem 3.6MCQ:
Consider Figure 3.4. For an ideal phase-shifting transformer, the imda nce is unchanged when it is...Problem 3.7MCQ:
Consider Figure 3.5. Match the following, those on the left to those on the right. (i) Im (a)...Problem 3.8MCQ:
The units of admittance, conductance, and susceptance are siemens. (a) True (b) FalseProblem 3.9MCQ:
Match the following: (i) Hysteresis loss (a) Can be redud by constructing the core with laminated...Problem 3.10MCQ:
For large power transformers rated more than 500 kVA, the winding resistances, which are small...Problem 3.11MCQ:
For a short-circuit test on a 2-winding transformer, with one winding shorted, can you apply the...Problem 3.12MCQ:
The per-unit quantity is always dimensionless. (a) True (b) FalseProblem 3.13MCQ:
Consider the adopted per-unit system for the transformers. Specify true or false for each of the...Problem 3.14MCQ:
The ideal transformer windings are eliminated from the per-unit equivalent circuit of a transformer....Problem 3.15MCQ:
To convert a per-unit impedance from old to new base values, the equation to be used is...Problem 3.16MCQ:
In developing per-unit circuits of systems such as the one shown in Figure 3.10. when moving across...Problem 3.19MCQ:
With the American Standard notation, in either a Y-or-Y transformer, positive- sequen quantities on...Problem 3.21MCQ:
In order to avoid difficulties with third-harmonic exciting current, which three-phase transformer...Problem 3.23MCQ:
Does an open- operation, the kVA rating compared to that of the original thr-phase bank is (a) 2/3...Problem 3.24MCQ:
It is stated that (i) balanced three-phase circuits can be solved in per unit on a per-phase basis...Problem 3.25MCQ:
In developing per-unit equivalent circuits for three-phase transformers. under balanced three-phase...Problem 3.26MCQ:
In per-unit equivalent circuits of practical three-phase transformers, under balanced thr-phase...Problem 3.29MCQ:
For developing per-unit equivalent circuits of single-phase three-winding transformer, a common...Problem 3.33MCQ:
The direct electrical connection of the windings allows transient over voltages to pass through the...Problem 3.34MCQ:
Consider Figure 3.25 of the text for a transformer with off-nominal turns ratio. (i) The per-unit...Problem 3.1P:
(a) An ideal single-phase two-winding transformer with turns ratio at=N1/N2 is connected with a...Problem 3.2P:
An ideal transformer with N1=1000andN2=250 is connected with an impedance Z22 across winding 2. If...Problem 3.3P:
Consider an ideal transformer with N1=3000andN2=1000 turns. Let winding 1 be connected to a source...Problem 3.4P:
A single-phase 100-kVA,2400/240-volt,60-Hz distribution transformer is used as a step-down...Problem 3.7P:
Consider a source of voltage v(t)=102sin(2t)V, with an internal resistance of 1800. A transformer...Problem 3.10P:
A single-phase step-down transformer is rated 13MVA,66kV/11.5kV. With the 11.5 kV winding...Problem 3.11P:
For the transformer in Problem 3.10. The open-circuit test with 11.5 kV applied results in a power...Problem 3.13P:
A single-phase 50-kVA,2400/240-volt,60-Hz distribution transformer has a 1-ohm equivalent leakage...Problem 3.14P:
A single-phase 50-kVA,2400/240-volt,60-Hz distribution transformer is used as a step-down...Problem 3.15P:
Rework Problem 3.14 if the transformer is delivering rated load at rated secondary voltage and at...Problem 3.16P:
A single-phase, 50-kVA,2400/240-V,60-Hz distribution transformer has the following parameters:...Problem 3.17P:
The transformer of Problem 3.16 is supplying a rated load of 50 kVA at a rated secondary voltage of...Problem 3.22P:
A balanced Y-connected voltage source with Eag=2770volts is applied to a balanced-Y load in parallel...Problem 3.23P:
Figure 3.32 shows the oneline diagram of a three-phase power system. By selecting a common base of...Problem 3.24P:
For Problem 3.18, the motor operates at full load, at 0.8 power factor leading, and at a terminal...Problem 3.25P:
Consider a single-phase electric system shown in Figure 3.33. Transformers are rated as follows:...Problem 3.26P:
A bank of three single-phase transformers, each rated 30MVA,38.1/3.81kV, are connected in Y- with a...Problem 3.27P:
A three-phase transformer is rated 1000MVA,220Y/22kV. The Y-equivalent short-circuit impedance,...Problem 3.28P:
For the system shown in Figure 3.34. draw an impedance diagram in per unit by choosing 100 kVA to be...Problem 3.29P:
Consider three ideal single-phase transformers (with a voltage gain of ) put together as ...Problem 3.30P:
Reconsider Problem 3.29. If Va,VbandVc are a negative-sequence set, how would the voltage and...Problem 3.32P:
Determine the positive- and negative-sequence phase shifts for the three- phase transformers shown...Problem 3.33P:
Consider the three single-phase two-winding transformers shown in Figure 3.37. The high-voltage...Problem 3.34P:
Three single-phase, two-winding transformers, each rated 450MVA,20kV/288.7kV, with leakage reactance...Problem 3.35P:
Consider a bank of this single-phase two-winding transformers whose high-voltage terminals are...Problem 3.36P:
Three single-phase two-winding transformers, each rated 25MVA,34.5/13.8kV, are connected to form a...Problem 3.37P:
Three single-phase two-winding transformers, each rated 25MVA,54.2/5.42kV, are connected to form a...Problem 3.38P:
Consider a three-phase generator rated 300MVA,23kV, supplying a system load of 240 MA and 0.9 power...Problem 3.39P:
The leakage reactance of a three-phase, 300-MVA,230Y/23-kV transformer is 0.06 per unit based on its...Problem 3.41P:
Consider the single-line diagram of the power system shown in Figure 3.38. Equipment ratings are...Problem 3.42P:
For the power system in Problem 3.41, the synchronous motor absorbs 1500 MW at 0.8 power factor...Problem 3.43P:
Three single-phase transformers, each rated 10MVA,66.4/12.5kV,60Hz, with an equivalent series...Problem 3.44P:
A 130-MVA,13.2-kV three-phase generator, which has a positive-sequence reactance of 1.5 per unit on...Problem 3.45P:
Figure 3.39 shows a oneline diagram of a system in which the three-phase generator is rated 300 MVA,...Problem 3.46P:
The motors M1andM2 of Problem 3.45 have inputs of 120 and 60 MW, respectively, at 13.2 kV, and both...Problem 3.47P:
Consider the oneline diagram shown in Figure 3.40. The three-phase transformer bank is made up of...Problem 3.48P:
With the same transformer banks as in Problem 3.47, Figure 3.41 shows the oneline diagram of a...Problem 3.49P:
Consider the single-Line diagram of a power system shown in Figure 3.42 with equipment ratings...Problem 3.50P:
A single-phase three-winding transformer has the following parameters: Z1=Z2=Z3=0+j0.05,Gc=0, and...Problem 3.51P:
The ratings of a three-phase three-winding transformer are Primary(1): Y connected 66kV,15MVA...Problem 3.53P:
The ratings of a three-phase, three-winding transformer are Primary: Y connected, 66kV,15MVA...Problem 3.54P:
An infinite bus, which is a constant voltage source, is connected to the primary of the...Problem 3.55P:
A single-phase l0-kVA,2300/230-volt,60-Hz two-winding distribution transformer is connected as an...Problem 3.56P:
Three single-phase two-winding transformers, each rated 3kVA,220/110volts,60Hz, with a 0.10 per-unit...Problem 3.57P:
A two-winding single-phase transformer rated 60kVA,240/1200V,60Hz, has an efficiency of 0.96 when...Problem 3.58P:
A single-phase two-winding transformer rated 90MVA,80/120kV is to be connected as an autotransformer...Problem 3.60P:
PowerWorid Simulator case Problem 3_60 duplicates Example 3.13 except that a resistance term of 0.06...Problem 3.62P:
Rework Example 3.12 for a+10 tap, providing a 10 increase for the high-voltage winding.Problem 3.63P:
A 23/230-kV step-up transformer feeds a three-phase transmission line, which in turn supplies a...Problem 3.64P:
The per-unit equivalent circuit of two transformers Ta and Tb connected in parallel, with the same...Problem 3.65P:
Reconsider Problem 3.64 with the change that now Tb includes both a transformer of the same turns...Problem ACSQ:
What are the advantages of correctly specifying a transformer most Suita ble for its application?Browse All Chapters of This Textbook
Chapter 2 - FundamentalsChapter 3 - Power TransformersChapter 4 - Transmission Line ParametersChapter 5 - Transmission Lines: Steady-state OperationChapter 6 - Power FlowsChapter 7 - Symmetrical FaultsChapter 8 - Symmetrical ComponentsChapter 9 - Unsymmetrical FaultsChapter 10 - System ProtectionChapter 11 - Transient Stability
Book Details
Today's readers learn the basic concepts of power systems as they master the tools necessary to apply these skills to real world situations with POWER SYSTEM ANALYSIS AND DESIGN, 6E. This new edition highlights physical concepts while also giving necessar
Sample Solutions for this Textbook
We offer sample solutions for EBK POWER SYSTEM ANALYSIS AND DESIGN homework problems. See examples below:
Chapter 2, Problem 2.1MCQChapter 3, Problem 3.1MCQChapter 4, Problem 4.1MCQChapter 5, Problem 5.1MCQChapter 6, Problem 6.1MCQChapter 8, Problem 8.1MCQGiven Information: VLL=345KVS3ϕ=600MVApf=0.95 laggingn1CT Ratio=1200:5nVT Ratio=3000:1 ....Given: A three-phase steam turbine-generating unit having Frequency, f=60 Hz MVA rating, S=500 MVA...
More Editions of This Book
Corresponding editions of this textbook are also available below:
Power System Analysis and Design
7th Edition
ISBN: 9780357676394
Power System Analysis and Design, SI Edition
7th Edition
ISBN: 9780357676196
Power System Analysis and Design
7th Edition
ISBN: 9780357676400
MindTap Engineering for Glover/Overbye/Sarma's Power System Analysis and Design, 6th Edition, [Instant Access], 1 term (6 months)
6th Edition
ISBN: 9781305636309
POWER SYSTEM ANALYSIS+DESIGN-EBK >I<
6th Edition
ISBN: 9781337259170
POWER SYS. ANALYSIS+DESIGN
6th Edition
ISBN: 9780357700907
Power System Analysis & Design
6th Edition
ISBN: 9781305636187
Mindtap Engineering, 2 Terms (12 Months) Printed Access Card For Glover/overbye/sarma's Power System Analysis And Design, Si Edition, 6th
6th Edition
ISBN: 9781305637009
Lms Integrated For Mindtap Engineering, 2 Terms (12 Months) Printed Access Card For Glover/overbye/sarma's Power System Analysis And Design, Si Edition, 6th
6th Edition
ISBN: 9781305637047
MindTap Engineering, 1 term (6 months) Printed Access Card for Glover/Overbye/Sarma's Power System Analysis and Design, 6th
6th Edition
ISBN: 9781305636323
Power System Analysis and Design (MindTap Course List)
6th Edition
ISBN: 9781305632134
POWER SYSTEM ANALYSIS+DESIGN
7th Edition
ISBN: 9780357676189
EBK POWER SYSTEM ANALYSIS AND DESIGN
5th Edition
ISBN: 9781133172871
EBK POWER SYSTEM ANALYSIS AND DESIGN
5th Edition
ISBN: 9780100440685
EBK POWER SYSTEM ANALYSIS & DESIGN, SI
5th Edition
ISBN: 9781133386681
POWER SYSTEM ANALYSIS+DESIGN,SI EDITION
5th Edition
ISBN: 9781111425791
Power System Analysis and Design - 5th Edition
5th Edition
ISBN: 9781111425777
Related Electrical Engineering Textbooks with Solutions
Still sussing out bartleby
Check out a sample textbook solution.