Physics for Scientists and Engineers, Technology Update (No access codes included)
Physics for Scientists and Engineers, Technology Update (No access codes included)
9th Edition
ISBN: 9781305116399
Author: Raymond A. Serway, John W. Jewett
Publisher: Cengage Learning
bartleby

Videos

Textbook Question
Book Icon
Chapter 22, Problem 22.33P

An electric generating station is designed to have an electric output power of 1.40 MW using a turbine with two-thirds the efficiency of a Carnot engine. The exhaust energy is transferred by heat into a cooling tower at 110°C. (a) Find the rate at which the station exhausts energy by heat as a function of the fuel combustion temperature Th. (b) If the firebox is modified to run hotter by using more advanced combustion technology, how does the amount of energy exhaust change? (c) Find the exhaust power for Th = 800°C. (d) Find the value of Th for which the exhaust power would be only half as large as in part (c). (e) Find the value of Th for which the exhaust power would be one-fourth as large as in part (c).

(a)

Expert Solution
Check Mark
To determine

The rate at which the station exhaust energy by heat as a function of the fuel combustion temperature TH.

Answer to Problem 22.33P

The rate at which the station exhaust energy by heat as a function of the fuel combustion temperature TH is 1.40(0.5TH+383TH383).

Explanation of Solution

The rate of work output of the engine is 1.40MW, thetemperature into the cooling tower is 110°C.

Write the formula to calculate the carnot efficiency of the engine.

    η=(THTCTH)=(1TCTH)

Here, η is the carnot efficiency of the engine, TC is the temperature into the cooling tower and TH is the fuel combustion temperature.

The actual efficiency of the engine is equal to two-thirds of the efficiency of the carnot engine.

    ηa=23η                                                                                (I)

Here, ηa is the actual efficiency of the engine.

Substitute (1TCTH) for η in equation (I) to find ηa,

    ηa=23(1TCTH)=23(THTCTH)

Write the formula to calculate the rate of heat input to the engine.

    ηa=WQQ=Wηa

Here, W is the rate of work output of the engine and Q is the rate of heat input to the engine.

Write the formula to calculate the rate at which the station exhaust energy by heat as a function of the fuel combustion temperature TH.

    QeΔt=QWΔt                                                                                       (II)

Here, Qe is the energy expelled by the engine, Δt is the time interval and QeΔt is the exhaust power.

Substitute Wηa for Q in equation (II) to find QeΔt,

    QeΔt=(WηaW)/Δt=WΔt(1ηa1)                                                                          (III)

Substitute 23(THTCTH) for ηa in equation (3) to find QeΔt,

    QeΔt=WΔt(123(THTCTH)1)=WΔt(32(THTHTC)1)=WΔt(TH+2TC2(THTC))=WΔt(0.5TH+TCTHTC)                                                                   (IV)

Conclusion:

Substitute 1.40MW for WΔt and 110°C for TC in equation (IV) to find QeΔt,

    QeΔt=1.40 MW(0.5TH+(110°C+273)KTH(110°C+273)K)=1.40(0.5TH+383TH383)

Thus, the rate at which the station exhaust energy by heat as a function of the fuel combustion temperature TH is 1.40(0.5TH+383TH383). The energy exhaust rate is in megawatts and the fuel temperature is in Kelvin.

(b)

Expert Solution
Check Mark
To determine

The effect on the amount of the energy if the firebox is modified to run hotter by using more advanced combustion technology.

Answer to Problem 22.33P

The  amount of the energy exhaust decreases as the fire box temperature increases.

Explanation of Solution

If the firebox is modified to run hotter by using more advanced combustion technology, the exhaust power increases by a factor of 0.5TH+383 and decreases by a factor of TH383. Thus, there is an overall decrease in power exhaust. Since power exhaust decreases the corresponding energy exhaust also should be decreasing.

Conclusion:

The  amount of the energy exhaust decreases as the fire box temperature increases.

(c)

Expert Solution
Check Mark
To determine

The exhaust power for TH=800°C.

Answer to Problem 22.33P

The exhaust power for TH=800°C is 1.87MW.

Explanation of Solution

 The rate of work output of the engine is 1.40MW, fuel combustion temperature is 800°C, the temperature into the cooling tower is 110°C.

From equation (IV), write the formula to calculate the exhaust power for TH=800°C.

    QeΔt=W(0.5TH+TCTHTC)

Conclusion:

Substitute 1.40MW for W, 800°C for TH, 110°C for TC in equation (4) to find QeΔt,

    QeΔt=1.40MW(0.5(800°C+273)K+(110°C+273)K(800°C+273)K(110°C+273)K)=1.40MW(0.5(1073)K+(383)K(1073)K(383)K)=1.8656MW1.87MW

Thus, the exhaust power for TH=800°C is 1.87MW.

(d)

Expert Solution
Check Mark
To determine

The value of TH for which the exhaust power would be only half as large as in part (c).

Answer to Problem 22.33P

The value of TH for which the exhaust power would be only half as large as in part (c) is 3.84×103K.

Explanation of Solution

 The rate of work output of the engine is 1.40MW, the temperature into the cooling tower is 110°C.

Write the expression for the exhaust power whuch would be only half as large as in part (c).

    (QeΔt)=12(QeΔt)                                                                             (V)

Here, (QeΔt) is the exhaust power whuch would be only half as large as in part (c).

Substitute 1.86MW for (QeΔt) in equation (5) to find (QeΔt),

    (QeΔt)=12(1.86MW)=0.933MW

Thus, the exhaust power whuch would be only half as large as in part (c) is 0.933MW.

From equation (IV), Write the formula to calculate the value of TH for which the exhaust power would be only half as large as in part (c).

    (QeΔt)=W(0.5TH+TCTHTC)(THTC)(QeΔt)×1W=0.5TH+TCTH(((QeΔt)×1W)0.5)=TC(1+(QeΔt)×1W)TH=TC(1+(QeΔt)×1W)(((QeΔt)×1W)0.5)                                  (VI)

Conclusion:

Substitute 1.40MW for W, 0.933MW for (QeΔt), 110°C for TC in equation (6) to find TH,

    TH=(110°C+273)K×(1+(0.933MW×11.40MW))((0.933MW×11.40MW)0.5)=(383)K×(1+(0.666MW))((0.666MW)0.5)=3844.832K3.84×103K

Thus, the value of TH for which the exhaust power would be only half as large as in part (c) is 3.84×103K.

(e)

Expert Solution
Check Mark
To determine

The value of TH for which the exhaust power would be one-fourth as large as in part (c).

Answer to Problem 22.33P

No temperature value will provide an exhaust power of one-fourth of the value in part (c).

Explanation of Solution

The rate of work output of the engine is 1.40MW, the temperature into the cooling tower is 110°C.

Write the expression for the exhaust power whuch would be one-fourth as large as in part (c).

    (QeΔt)=14(QeΔt)                                                                  (VII)

Here, (QeΔt) is the exhaust power whuch would be one-fourth as large as in part (c).

Substitute 1.86MW for (QeΔt) in equation (7) to find (QeΔt),

    (QeΔt)=14(1.86MW)=0.466MW

Thus, the exhaust power whuch would be one-fourth as large as in part (c) is 0.466MW which is too small.

Conclusion:

From equation (IV), Write the formula to calculate the value of TH for which the exhaust power would be one-fourth as large as in part (c).

    limTH(QeΔt)=limTH1.40MW(0.5+383THTHTH383TH)=1.40MW(0.51)=0.700MW          (VIII)

Thus, the given exhaust power is lesser than the minimum possible exhaust power 0.700MW. Since it is impossible to obtain a lesser exhaust power, no anwer exists.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
A diesel generator supplies a small mine, not connected to a power grid, with power. The maximum output is 1000 kW. The efficiency of the generator is 85 per cent and that of the diesel engine is 40 per cent. Calculate the maximum mass of fuel consumed per hour if the calorific value of the fuel is 44MJ/kg. Calculate the minimum capacity of the fuel tank required if the density of the fuel is 0.95 kg/litre and the load factor is 0.55 over 24 hours. Fuel is only delivered once a week.
As a gasoline engine is running, an amount of gasoline containing 15,000J of chemical potential energy is burned in 1 s. During that second, the engine does 3,000 J of work. (b) The burning gasoline has a temperature of about 2500 K. The waste heat from the engine flows into air at about 300 K. What is the Carnot efficiency of a heat engine operating between these two temperatures?
A heat engine takes in 310 J of energy from a hot reservoir and performs 27.0 J of work in each cycle. (a) Find the efficiency of the engine. (b) Find the energy expelled to the cold reservoir in each cycle.

Chapter 22 Solutions

Physics for Scientists and Engineers, Technology Update (No access codes included)

Ch. 22 - Consider cyclic processes completely characterized...Ch. 22 - Prob. 22.6OQCh. 22 - A steam turbine operates at a boiler temperature...Ch. 22 - A thermodynamic process occurs in which the...Ch. 22 - A sample of a monatomic ideal gas is contained in...Ch. 22 - An engine does 15.0 kJ of work while exhausting...Ch. 22 - The arrow OA in the PV diagram shown in Figure...Ch. 22 - The energy exhaust from a certain coal-fired...Ch. 22 - Discuss three different common examples of natural...Ch. 22 - Prob. 22.3CQCh. 22 - The first law of thermodynamics says you cant...Ch. 22 - Energy is the mistress of the Universe, and...Ch. 22 - Prob. 22.6CQCh. 22 - The device shown in Figure CQ22.7, called a...Ch. 22 - A steam-driven turbine is one major component of...Ch. 22 - Discuss the change in entropy of a gas that...Ch. 22 - Prob. 22.10CQCh. 22 - Prob. 22.11CQCh. 22 - (a) If you shake a jar full of jelly beans of...Ch. 22 - Prob. 22.13CQCh. 22 - A particular heat engine has a mechanical power...Ch. 22 - The work done by an engine equals one-fourth the...Ch. 22 - A heat engine takes in 360 J of energy from a hot...Ch. 22 - A gun is a heat engine. In particular, it is an...Ch. 22 - An engine absorbs 1.70 kJ from a hot reservoir at...Ch. 22 - A multicylinder gasoline engine in an airplane,...Ch. 22 - Suppose a heat engine is connected to two energy...Ch. 22 - A refrigerator has a coefficient of performance...Ch. 22 - During each cycle, a refrigerator ejects 625 kJ of...Ch. 22 - A heat pump has a coefficient of performance of...Ch. 22 - A refrigerator has a coefficient of performance of...Ch. 22 - A heat pump has a coefficient of performance equal...Ch. 22 - A freezer has a coefficient of performance of...Ch. 22 - Prob. 22.14PCh. 22 - One of the most efficient heat engines ever built...Ch. 22 - Why is the following situation impossible? An...Ch. 22 - A Carnot engine has a power output of 150 kW. The...Ch. 22 - A Carnot engine has a power output P. The engine...Ch. 22 - What is the coefficient of performance of a...Ch. 22 - An ideal refrigerator or ideal heat pump is...Ch. 22 - Prob. 22.21PCh. 22 - How much work does an ideal Carnot refrigerator...Ch. 22 - If a 35.0% -efficient Carnot heat engine (Fig....Ch. 22 - A power plant operates at a 32.0% efficiency...Ch. 22 - A heat engine is being designed to have a Carnot...Ch. 22 - A Carnot heat engine operates between temperatures...Ch. 22 - An ideal gas is taken through a Carnot cycle. The...Ch. 22 - Prob. 22.28PCh. 22 - Prob. 22.29PCh. 22 - Suppose you build a two-engine device with the...Ch. 22 - Argon enters a turbine at a rate of 80.0 kg/min, a...Ch. 22 - At point A in a Carnot cycle, 2.34 mol of a...Ch. 22 - An electric generating station is designed to have...Ch. 22 - An ideal (Carnot) freezer in a kitchen has a...Ch. 22 - A heat pump used for heating shown in Figure...Ch. 22 - A gasoline engine has a compression ratio of 6.00....Ch. 22 - In a cylinder of an automobile engine, immediately...Ch. 22 - An idealized diesel engine operates in a cycle...Ch. 22 - Prob. 22.39PCh. 22 - (a) Prepare a table like Table 21.1 for the...Ch. 22 - Prob. 22.41PCh. 22 - An ice tray contains 500 g of liquid water at 0C....Ch. 22 - A Styrofoam cup holding 125 g of hot water at 100C...Ch. 22 - A 1.00-kg iron horseshoe is taken from a forge at...Ch. 22 - A 1 500-kg car is moving at 20.0 m/s. The driver...Ch. 22 - Prob. 22.46PCh. 22 - Prob. 22.47PCh. 22 - 1.00-mol sample of H2 gas is contained in the left...Ch. 22 - A 2.00-L container has a center partition that...Ch. 22 - What change in entropy occurs when a 27.9-g ice...Ch. 22 - Calculate the change in entropy of 250 g of water...Ch. 22 - How fast are you personally making the entropy of...Ch. 22 - When an aluminum bar is connected between a hot...Ch. 22 - When a metal bar is connected between a hot...Ch. 22 - Prob. 22.55PCh. 22 - Calculate the increase in entropy of the Universe...Ch. 22 - How much work is required, using an ideal Carnot...Ch. 22 - Prob. 22.58APCh. 22 - The energy absorbed by an engine is three times...Ch. 22 - Prob. 22.60APCh. 22 - Prob. 22.61APCh. 22 - In 1993, the U.S. government instituted a...Ch. 22 - Prob. 22.63APCh. 22 - One mole of neon gas is heated from 300 K to 420 K...Ch. 22 - Au airtight freezer holds n moles of air at 25.0C...Ch. 22 - Suppose an ideal (Carnot) heat pump could be...Ch. 22 - In 1816, Robert Stirling, a Scottish clergyman,...Ch. 22 - A firebox is at 750 K, and the ambient temperature...Ch. 22 - Review. This problem complements Problem 44 in...Ch. 22 - A biology laboratory is maintained at a constant...Ch. 22 - A power plant, having a Carnot efficiency,...Ch. 22 - A power plant, having a Carnot efficiency,...Ch. 22 - A 1.00-mol sample of an ideal monatomic gas is...Ch. 22 - A system consisting of n moles of an ideal gas...Ch. 22 - A heat engine operates between two reservoirs at...Ch. 22 - A 1.00-mol sample of a monatomic ideal gas is...Ch. 22 - A sample consisting of n moles of an ideal gas...Ch. 22 - An athlete whose mass is 70.0 kg drinks 16.0...Ch. 22 - Prob. 22.79APCh. 22 - Prob. 22.80APCh. 22 - A 1.00-mol sample of an ideal gas ( = 1.40) is...Ch. 22 - The compression ratio of an Otto cycle as shown in...
Knowledge Booster
Background pattern image
Physics
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.
Similar questions
SEE MORE QUESTIONS
Recommended textbooks for you
Text book image
University Physics Volume 2
Physics
ISBN:9781938168161
Author:OpenStax
Publisher:OpenStax
Text book image
Physics for Scientists and Engineers, Technology ...
Physics
ISBN:9781305116399
Author:Raymond A. Serway, John W. Jewett
Publisher:Cengage Learning
Text book image
Principles of Physics: A Calculus-Based Text
Physics
ISBN:9781133104261
Author:Raymond A. Serway, John W. Jewett
Publisher:Cengage Learning
Text book image
College Physics
Physics
ISBN:9781938168000
Author:Paul Peter Urone, Roger Hinrichs
Publisher:OpenStax College
Text book image
Physics for Scientists and Engineers: Foundations...
Physics
ISBN:9781133939146
Author:Katz, Debora M.
Publisher:Cengage Learning
The Second Law of Thermodynamics: Heat Flow, Entropy, and Microstates; Author: Professor Dave Explains;https://www.youtube.com/watch?v=MrwW4w2nAMc;License: Standard YouTube License, CC-BY