Principles of Foundation Engineering, SI Edition
9th Edition
ISBN: 9781337672085
Author: Das, Braja M., SIVAKUGAN, Nagaratnam
Publisher: Cengage Learning
expand_more
expand_more
format_list_bulleted
Concept explainers
Question
Chapter 2, Problem 2.17P
To determine
Find the shear strength parameters peak cohesion
Expert Solution & Answer
Trending nowThis is a popular solution!
Students have asked these similar questions
20. A cohesionless sand sample was subjected to a triaxial shear test. Failure occurred when the normal stress is 400 KPa and the shear stress is 250 KPa. a. What is major principal stress? b. What is the minor principal stress
A triaxial shear test was performed on a well-drained sand sample. The normal stress on the failure plane and the shear stress on the failure plane, at failure were determined to be 6100 psf and 4600 psf, respectively.
a. Determine the angle of internal friction of the sand?
b. Determine the angle of the failure plane?
c. Determine the maximum principal stress?
Please answer this asap. For upvote. Thank you very much
Two drained triaxial tests were performed on a saturated overconsolidated clay
and the results are shown below. Determine the effective and total shear
strength parameters.
Specimen I:
Specimen II:
0²-70 kPa
a=160 kPa
Od 130 kPa
Od-223.5 kPa
Chapter 2 Solutions
Principles of Foundation Engineering, SI Edition
Knowledge Booster
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.Similar questions
- A sand sample is subjected to direct shear testing. Two tests areperformed. For test 1, The sample shears at a stress of 2500 psf whenthe normal stress is 4000 psf.Test 2, The sample shears at a stress of 3500 psf when the normalstress is 6000 psf. Determine the following:a) Angle of Internal frictionb) Value of cohesionc) Compute the shear stress at a depth of 12 ft. if the unit weight ofthe soil is 150 pcfarrow_forward2. A triaxial shear test was performed on a well-drained sand sample. The normal stress on the failure plane and the shear stress on the failure plane, at failure was determined to be 6,300 psf and 4,200 psf, respectively. a. Determine the angle of internal friction of the sand. b. Determine the angle of failure plane. c. Determine the maximum principal stress.arrow_forwardA consolidated undrained triaxial test was performed on a normally consolidated clay with a critical state friction angle of 230. After an initial isotropic consolidation at a cell pressure of 50 kPa, drainage was turned off, the cell pressure was increased to 85 kPa, and the sample was loaded to ultimate conditions. A pore pressure of 55 kPa was measured at ultimate state. What value of major principal total stress was measured at the ultimate state?arrow_forward
- a consolidated tri-axial test was conducted on a normally consolidated clay. the results were as follows: chamber confining pressure = 316 kPa, deviator stress = 424 kPa. compute for the shear stress on the failure plane in kPa.arrow_forwardA consolidated drained (CD) triaxial test was carried out on a normally consolidated clay. The specimen was consolidated under a cell pressure of 100 kPa and back pressure of 30 kPa. The axial deviatoric stress was increased very slowly to failure, so that there was no excess pore water pressure developed during the shearing. The specimen failed under a deviatoric stress of 130 kPa. The back pressure of 30 kPa was maintained throughout the test. (i) What is the friction angle in terms of effective stresses? (ii) What are the shear stress and normal stress acting on the failure plane? Solution fast pleasearrow_forwardA consolidated drained (CD) triaxial test was carried out on a normally consolidated clay. The specimen was consolidated under a cell pressure of 100 kPa and back pressure of 30 kPa. The axial deviatoric stress was increased very slowly to failure, so that there was no excess pore water pressure developed during the shearing. The specimen failed under a deviatoric stress of 130 kPa. The back pressure of 30 kPa was maintained throughout the test. (1) What is the friction angle in terms of effective stresses? (ii) What are the shear stress and normal stress acting on the failure plane?arrow_forward
- A triaxial shear test was performed on a well-drained sand sample. The normal stress on the failure plane and the shearing stress on the failure plane were determined to be 75kPa and 42kPa, respectively. Determine the angle of internal friction of the sand, in degrees.Determine the axial stress applied to the specimen, in kPa.arrow_forwardA consolidated tri-axial test was conducted on a normally consolidated clay. The results were as follows: Chamber confining pressure = 304 kPa, Deviator stress = 419 kPa. Compute for the shear stress on the failure plane in kPa. Round off to two decimal places.arrow_forwardIn a series of unconsolidated-undrained triaxial tests on speciments of a fully saturdated clay, the following results were obtained at failure. Calculate the following:a. Cohesionb. Angle of internal frictionarrow_forward
- Three specimnens of clay having a small air-void content were tested in the shear box. Shear loading was started immediately after the application of the normal load and was completed in 8 minutes. The results are as follows: Normal Stress (kN/m2) Shear stress at failure (kN/m2) O Find the apparent cohesion of the clay. Find the angle of shearing resistance of the clay. What value of c would be obtained from an unconfined compression test on 145 241 337 103 117 131 the same soil?arrow_forwardAn undisturbed soil sample, 110 mm in diameter and 220 mm in height, was tested in a triaxial machine. The sample sheared under an additional axial load of 3.35 kN with a vertical deformation of 21 mm. The failure plane was inclined at 50˚ to the horizontal and the cell pressure was 300 kN/m2. i. Draw the Mohr circle diagram representing the above stress conditions, and from it determine: − Coulomb’s equation for the shear strength of the soil, in terms of total stress; − the magnitude and obliquity of the resultant stress on the failure planearrow_forwardA consolidated-undrained triaxial compression test was performed on a normalconsolidated clay sample. During the experiment, the confining pressure was 140 kPa, thedeviator stress was 125 kPa, and the pore water pressure was 75 kPa at the time of failure.According to the information given:i- Find the consolidated-undrained internal friction angle of the clay. ii- Find the drained friction angle of the clayarrow_forward
arrow_back_ios
SEE MORE QUESTIONS
arrow_forward_ios
Recommended textbooks for you
Fundamentals of Geotechnical Engineering (MindTap...Civil EngineeringISBN:9781305635180Author:Braja M. Das, Nagaratnam SivakuganPublisher:Cengage Learning
Principles of Foundation Engineering (MindTap Cou...Civil EngineeringISBN:9781337705028Author:Braja M. Das, Nagaratnam SivakuganPublisher:Cengage Learning
Principles of Geotechnical Engineering (MindTap C...Civil EngineeringISBN:9781305970939Author:Braja M. Das, Khaled SobhanPublisher:Cengage Learning
Fundamentals of Geotechnical Engineering (MindTap...
Civil Engineering
ISBN:9781305635180
Author:Braja M. Das, Nagaratnam Sivakugan
Publisher:Cengage Learning
Principles of Foundation Engineering (MindTap Cou...
Civil Engineering
ISBN:9781337705028
Author:Braja M. Das, Nagaratnam Sivakugan
Publisher:Cengage Learning
Principles of Geotechnical Engineering (MindTap C...
Civil Engineering
ISBN:9781305970939
Author:Braja M. Das, Khaled Sobhan
Publisher:Cengage Learning