Concept explainers
Calculate the angular velocity of frame and moment of inertia of pulley and frame about rod CD.Coller A and B slide on frame collars are attached by a cord to slide over a frame.
Answer to Problem 17.89P
Angular velocity of the frame is
Explanation of Solution
Given information:
Mass of coller A =
Mass of coller B =
The velocity of coller A at position
Concept used:
Conservation of angular momentum.
Conservation of energy.
calculation:
component of velocity for coller A,
For position 1,
From equation (1),
Potential energy,
Kinetic energy,
Angular momentum,
For position 2,
Potential energy,
Kinetic energy,
Angular momentum,
By conservation of angular momentum,
By conservation of energy,
Further solving we get
Considering only the positive value.
Hence,
Moment of inertia of pulley and frame is 0.0507 kg.m2
To find the angular velocity of the frame, we have
Conclusion:
By applying conservation of angular momentum and conservation of energy for initial and find the position of coller relative to the frame we get,
Angular velocity of the frame is
Want to see more full solutions like this?
Chapter 17 Solutions
VECTOR MECH...,DYNAMICS(LOOSE)-W/ACCESS
- 1. Two children A and B, each having a mass 30kg, sit at the edge of the merry-go-round which is rotating with angular velocity @ = 2 rad/s. Excluding the children, the merry-go-round has a mass 180 kg and a radius of gyration k₂ = 0.8m. Determine the angular velocity of the merry-go-round if A jumps off horizontally in the -n direction (away from the merry-go-gound) with a speed of 3 m/s, measured with respect to the merry-go-round. After A jumps off, B then jumps off horizontally in the +t direction with a speed of 3 m/s, measured with respect to the merry-go-round - what is the merry-go-round's angular velocity now? Neglect friction and the size of each child. 1m 1m B w = 2 rad/sarrow_forwardThe 9-kg rod AB, which length is 2.0-m, is pin connected at A and attached to a horizontal spring at B. The spring will always remain horizontal. k M 1. The rod is subjected at A to a couple M. The rod forms an angle 0-30° with the vertical when the spring, of stiffness 27 N.m, is unstretched. Determine the couple M required to the observe an angular velocity of the rod w=6 rad/s when 0 =51.arrow_forwardThe arms of a Porter governor are 225 mm long. The upper and lower arms are pivoted to links of 35 mm and 45 mm respectively from the axis of rotation. Each ball has a mass of 4 kg and the sleeve mass is 35 kg. The force of friction on the sleeve of the mechanism is 44 N. Determine the range of speed of the governor for extreme radii of rotation of 115 mm and 145 mm.arrow_forward
- The 6-lb steel cylinder A of radius r and the 10-lb wooden cart B are at rest in the position shown when the cylinder is given a slightnudge, causing it to roll without sliding along the top surface of the cart. Neglecting friction between the cart and the ground, determine the velocity of the cart as the cylinder passes through the lowest point of the surface at C.arrow_forwardThe device shown is a simplified model of an amusement-park ride in which passengers are rotated about the vertical axis of the central post at an angular speed Q while sitting in a pod which is capable of rotating the occupants 360° about the longitudinal axis of the connecting arm attached to the central collar. Determine the percent increase n in angular velocity between configurations (a) and (b), where the passenger pod has rotated 90° about the connecting arm. For the model, m = 1.1 kg, r = 70 mm, I = 315 mm, and L = 640 mm. The post and connecting arms rotate freely about the z-axis at an initial angular speed 2 = 125 rev/min and have a combined mass moment of inertia about the z-axis of 38(10-3) kg m?. %3D (b) Ω (a) -Frame Pod Answer: n = %arrow_forward5. An 80 kg gymnast dismounts from a high bar. He starts the dismount at full extension, then tucks to complete a number of revolutions before landing. His moment of inertia when fully extended can be approximated as a rod of length 1.8 m and when in the tuck a rod of half that length. If his rotation rate at full extension is 1.0 rev/s and he enters the tuck when his center of mass is at 3.0 m height moving horizontally to the floor, how many revolutions can he execute if he comes out of the tuck at 1.8 m height? High bar 1.8 m 3 m ANS. Moment of inertia at full extension, I = 21.6 kg-m^2 Moment of inertia at the tuck I' = 5.4 kg-m^2 Angular velocity at the tuck = 4 rev/sec Time interval in the tuck = 0.5 sec i.e. In 0.5 s, he will be able to execute two revolutions at 4.0 rev/s.arrow_forward
- Which of the following statements about the motion of disk O just before cable AB becomes taut is FALSE? a. The only force acting on the disk is its own weight b. The velocities of points B and O on the disk are equal.c. The velocity of its mass center O is purely vertical. d. The acceleration of the disk's mass center is 0.arrow_forwardQ. The upper and lower arms of Porter governor are 0.25 m each and are pivoted 30 mm from the axis of rotation. The radius of rotation Is 130 mm. The mass of the ball and sleeve are 3 kg and 38 kg respectively. Find the effort and power of the governor.arrow_forwardA torque T of 100 N-m is applied to a wheel D having a mass of 50 kg. a diame- ter of 600 mm, and a radius of gyration of 280 mm. The wheel D is attached by a light member AB to a slider C having a mass of 30 kg. If the system is at rest at the instant shown, what is the acceleration of slider C? What is the axial force in member AB? Neglect friction everywhere, and neglect the inertia of the memberAB. (Draw FBDs)arrow_forward
- Two panels A and B are attached with hinges to a rectangular plate and held by a wire as shown. The plate and the panels are made of the same material and have the same thickness. The entire assembly is rotating with an angular velocity w0 when the wire breaks. Draw the impulse–momentum diagram that is needed to determine the angular velocity of the assembly after the panels have come to rest against the plate.arrow_forwardThe 1.8-kg uniform bar rotates in the vertical plane about the pin at O.When the bar is in the position shown, its angular velocity is 4 rad/s, clockwise. For this position, find (a) the angular acceleration of the bar; and (b) the magnitude of the pin reaction at O.arrow_forwardA 210-lb satellite has a radius of gyration of 20 in. about the y-axis and is symmetric about the zx-plane. Its orientation is changed by firing four small rockets A, B, C, and D, each of which produces a 10-lb thrust force T directed as shown. Determine the acceleration of its center of mass G (in ft/s²) when all the rockets except D are fired. T B G 32 in. T D T A xarrow_forward
- Elements Of ElectromagneticsMechanical EngineeringISBN:9780190698614Author:Sadiku, Matthew N. O.Publisher:Oxford University PressMechanics of Materials (10th Edition)Mechanical EngineeringISBN:9780134319650Author:Russell C. HibbelerPublisher:PEARSONThermodynamics: An Engineering ApproachMechanical EngineeringISBN:9781259822674Author:Yunus A. Cengel Dr., Michael A. BolesPublisher:McGraw-Hill Education
- Control Systems EngineeringMechanical EngineeringISBN:9781118170519Author:Norman S. NisePublisher:WILEYMechanics of Materials (MindTap Course List)Mechanical EngineeringISBN:9781337093347Author:Barry J. Goodno, James M. GerePublisher:Cengage LearningEngineering Mechanics: StaticsMechanical EngineeringISBN:9781118807330Author:James L. Meriam, L. G. Kraige, J. N. BoltonPublisher:WILEY