Concept explainers
The dam which is built more strongly.
Answer to Problem 1OQ
Option (c) Both dams have equal strength.
Explanation of Solution
It is mentioned that both dams are of equal width. The first dam holds back a large lake and the second dam holds back a narrow river. Practically the size of water that a dam holds back is not the factor on which the strength of the dam is decided during construction. The strength of the dam is decided depending on the height above the ground it holds water.
The pressure of water at the bottom of the dam is given by the expression,
Here,
Assuming both reservoirs are equally high (that is water is equally deep), the pressure exerted by the water on the bottom of the dams will be same, the pressure is the same regardless the width of water the dams hold. Thus, Both dams have equal strength.
Conclusion:
Since both dams have equal strength, option (c) is correct.
The dam on the left has no extra strength as compared to the right and hence it does not possess more strength Thus, option (a) is incorrect.
The dam on the right has no extra strength as compared to the right and hence it does not possess more strength Thus, option (c) is incorrect.
The strength of the dams can be predicted from their height about which it holds water Thus, option (d) is incorrect.
Want to see more full solutions like this?
Chapter 14 Solutions
Physics for Scientists and Engineers With Modern Physics
- A large storage tank with an open top is filled to a height h0. The tank is punctured at a height h above the bottom of the tank (Fig. P15.39). Find an expression for how far from the tank the exiting stream lands. Figure P15.39arrow_forwardConsider a river that spreads out in a delta region on its way to the sea. Construct a problem in which you calculate the average speed at which water moves in the delta region, based on the speed at which it was moving up river. Among the things to consider are the size and flow rate of the river before it spreads out and its size once it has spread out. You can construct the problem for the river spreading out into one large river or into multiple smaller rivers.arrow_forwardFigure OQ14.1 shows aerial views from directly above two dams. Both dams are equally wide (the vertical dimension in the diagram) and equally high (into the page in the diagram). The dam on the left holds back a very large lake, and the dam on the right holds back a narrow river. Which dam has to be built more strongly? (a) the dam on the left (b) the dam on the right (c) both the same (d) cannot be predicted Dam Dam Figure 0014.1arrow_forward
- How to design a small dam? We've been tasked to do that for our project and we don't know what to do. It is for small-scale dam for agricultural irrigation. I want to know what are the factors to be considered or any relevant information to structurally design a dam.arrow_forwardTwo streams merge to form a river. One stream has a width of 8.2 m, depth of 3.4 m, and current speed of 2.3 m/s. The other stream is 6.8 m wide and 3.2 m deep, and flows at 2.6 m/s. If the river has width 10.5 m and speed 2.9 m/s, what is its depth?arrow_forwardMany of the cities in Holland are below sea level, and the sea is held back by a series of levies, called dikes. A story tells of a young Dutch boy named Hans Brinker, who was walking home along the dikes from school one day, and saw a small leak. He realized this was a real problem, so he stuck his thumb in the hole and cried for help. Imagine that the hole is 10.0 feet (3.08 meters) beneath the level of the sea beyond. How much pressure is being exerted at the hole? Hans’ thumb has a surface area of 0.895 square centimeters (Think: How many square centimeters in a square meter?). How much force does he feel on his thumb? Do you think that is a reasonable amount of force for a child to balance? Normally, to find the total pressure exerted, we’d have to add atmospheric pressure to the pressure exerted by the seawater. Why do we not have to worry about that here? *Problems involving the buoyant force are Newton’s Second Law problems, and should be solved with the same process!*arrow_forward
- The plunger of the hydraulic lift in a gasoline service station has a diameter of 1 inch. It is operated by a compressed air (density = 63 kg/m3) from the tank in which the pressure is 9.315 x 105 pascals. The output piston and the rack on which the car rests are 2 feet lower than the input plunger and together weigh 1,336.33 newtons. What is the weight of the heaviest car that can be lifted if the output piston has a diameter of 1 foot? Assume 80% efficiency of the machine.arrow_forwardHoover Dam on the Colorado River is the highest dam in the United States at 221 m, with an output of 1300 MW. The dam generates electricity with water taken from a depth of 101 m and an average flow rate of 640 m3/s. (a) Calculate the power in this flow in watts. 631571584 X W (b) What is the ratio of this power to the facility's average of 680 MW? 0.928 Hoover Dam on the Colorado River is the highest dam in the United States at 221 m, with an output of 1300 MW. The dam generates electricity with water taken from a depth of 101 m and an average flow rate of 640 m3/s. (a) Calculate the power in this flow in watts. 633500000 x W (b) What is the ratio of this power to the facility's average of 680 MW? 0.932 Xarrow_forwardHoover Dam on the Colorado River is the highest dam in the United States at 221 m, with an output of 1300 MW. The dam generates electricity with water taken from a depth of 105 m and an average flow rate of 670 m3/s. (a) Calculate the power in this flow in watts. (b) What is the ratio of this power to the facility's average of 680 MW?arrow_forward
- Principles of Physics: A Calculus-Based TextPhysicsISBN:9781133104261Author:Raymond A. Serway, John W. JewettPublisher:Cengage LearningPhysics for Scientists and Engineers, Technology ...PhysicsISBN:9781305116399Author:Raymond A. Serway, John W. JewettPublisher:Cengage LearningPhysics for Scientists and Engineers with Modern ...PhysicsISBN:9781337553292Author:Raymond A. Serway, John W. JewettPublisher:Cengage Learning
- Physics for Scientists and EngineersPhysicsISBN:9781337553278Author:Raymond A. Serway, John W. JewettPublisher:Cengage LearningClassical Dynamics of Particles and SystemsPhysicsISBN:9780534408961Author:Stephen T. Thornton, Jerry B. MarionPublisher:Cengage LearningPhysics for Scientists and Engineers: Foundations...PhysicsISBN:9781133939146Author:Katz, Debora M.Publisher:Cengage Learning