---### Measurement Precision in LaboratoriesWhen conducting experiments that require precise measurement of liquids, choosing the right tool is crucial. The following question is geared towards evaluating the correct tool for measuring a specific volume of liquid accurately.#### Question:**You need to precisely measure 10.0 mL of liquid. What tool should you use?**#### Options:1. **50 mL graduated cylinder**2. **1 mL volumetric pipette (measured 10 times)**3. **10 mL graduated cylinder**4. **Beaker**### Explanation:- **50 mL graduated cylinder**: This tool can measure 10.0 mL, but it is not the most precise option because its larger scale divisions are less accurate for measuring small volumes. - **1 mL volumetric pipette (measured 10 times)**: This would be very time-consuming and increase the chance of cumulative measurement errors. - **10 mL graduated cylinder**: This is the most appropriate choice because it is designed specifically to measure 10.0 mL with higher accuracy. - **Beaker**: Beakers are generally not used for precise measurements as they are designed for rough volume estimates.When measuring liquids in laboratory settings, always select the tool that offers the greatest precision for the specific volume you need.---

There are various apparatus that is used in a chemistry lab while doing an experiment. Few examples…

Answered: You need to precisely measure 10.0 mL…

You need to precisely measure 10.0 mL of liquid. What tool should you use? O 50 mL graduated cylinder O 1 mL volumetric pipette (measured 10 times) O 10 mL graduated cylinder O beaker

Chemistry

10th Edition

ISBN:9781305957404

Author:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Publisher:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Chapter1: Chemical Foundations

Section: Chapter Questions

Problem 1RQ: Define and explain the differences between the following terms. a. law and theory b. theory and...

See similar textbooks

Related questions

Q: A urine sample had a density of 1.030g/ml. What is the specific gravity of the sample

Q: ultiply vide the following measurements. Be sure each answer you enter contains the correct number…

A: The significant figure refers to particular digits in a number. According to the measurement rule,…

Q: Calculate the volume in liters of a 0.045 mmol/L. potassium dichromate solution that contains 500…

Q: For exacting the measurements of liquids in graduated cylinders, pipettes, burettes, and volumetric…

A: For exacting the measurements of liquids in graduated cylinders, pipettes, burettes, and volumetric…

Q: A chemist mixes 29.8 g of acetone with 38.5 g of isopropenylbenzene and 57.3 g of acetic acid.…

A: Given that, a mixture contains 29.8 g of acetone, 38.5 g of isopropenylbenzene, and 57.3 g of acetic…

Q: Trial 1 Flask Reference Drops Net of Acid added Acid 15 drops drops of 25 (ref- expt) UMCO₂…

A: The main ai of this experiment is to determine the buffering capacity of fish blood using a…

Q: A student measures the density of a solution to be 0.80 g/mL. The true density of the solution is…

A: Formula to calculate percent error is

Q: One solution contains 44% alcohol, and another solution contains 81% alcohol. How many liters of 81%…

A: Given One solution contains 44% alcohol, and another solution contains 81% alcohol. We need to find…

Q: Read the volume of the water in the picture, to the correct number of sig figs. Include answer. mL…

A: Given :

Q: I. Determine the number of significa 1. 8.314 g 2. 5.008 x 10-2 mM 3. MMNACI = 58.44 g/mol %3D 4.…

A: According to guidelines, only 3 sub parts have to be answered.

Q: Complete the table below. ks cg 7000 mm 6 ML = = 9000 s 4 g m

A: We know that: 1 ks = 1000 s 1 g = 100 cg 1 m = 1000 mm 1 L = 1000 mL

Q: Calculate the total volume, given that the three volumes shown below were combined into the same…

A: We can solve this problem by converting all three volumes in same unit litter.

Q: + A. Measurement of Liquid Equipment Measured Volume Actual Volume 250 mL Beaker 100 mL 101 mL 125…

Q: a. Guess which contains more, the can or the bottle. (Assumethat the top part of the bottle is a…

A: The volume of cylinder and cone are expressed as: Vcylinder=πr2h Vcone=13πr2h

Q: A 4.06 fl℥ bottle of Clemastine fumerate syrup 0.5 mg/mL was dispensed by the pharmacist. If patient…

A: 1 fluid ounce = 29.573 ml 4.06 fluid ounce === 4.06 x 29.573 ml = 120.1 ml bottle of Clemastine…

Q: Employ the method of dimensional analysis to convert 1 cubic yard to tonnes of water. Assume a…

A: Using dimensional analysis method the given 1 cubic yard is converted into to tonnes of water as…

Q: Data from M. J. Samide, J. Chem. Ed. 2004, 81, 1641. (a) Do the volumes delivered by student 1 from…

A: a. First calculate the volumes delivered by student 1 from burette. Mean volume (V¯) = 10.01 ml No.…

Q: How many grams would 1 pt of HCl weigh with specific gravity of 1.16? 2. If 500 mL of ferric…

A: Hi there! as there are multiple sub-parts posted. we are solving first three subparts. If you need…

Q: A chemist mixes 16.4 g of benzene with 88.3 g of acetic acid and 13.3 g of isopropenylbenzene.…

A: The given information is as follows: The mass of benzene = 16.4 g The mass of acetic acid =…

Q: (d) 19 oz to mL

A: Given is, 19 Oz

Q: A 0.390-mLmL sample of very-low-density lipoprotein (VLDL) has a mass of 371 mgmg. What is the…

A: We have given that Mass of (VLDL) = 371mg=371×10-3grams = 0.371g Volume of (VLDL) = 0.390ml…

Q: 9) 1.00 yd (3 ft = 1 yard, exactly) cm

Q: A chemist makes 530. mL of copper(II) fluoride (CuF,) working solution by adding distilled water to…

Q: There are .355 in most cans. How many drops on this ? (20drops = 1 ml)

A: Assuming the given 0.355 is in milliliters.1mL = 20 drops.

Q: A chemist prepares a solution of silver(I) nitrate (AgNO3) by measuring out 389. μmol of silver(I)…

Q: Which of the following is a proper volume measurement for the liquid in this buret? Only 1 answer…

A: Since the given burette has a least count of 0.1 mL. The measurement of volume in mL can be done…

Q: 11. Convert 0.00070 mL into µL.

Q: Initial buret reading (A) = Final Buret reading (B) = Total volume used =

A: initial burette reading=9.6ml final burette reading=24.1ml

Q: Convert 8.9 g/mL to its equivalent in kg/m^3. Round the answer to the nearest unit.

A: Using unit conversion method we can convert 8.9 g/mL to kg/m3 unit.

Q: Complete the table below. ML = 600 cs = 60 dg mm = = X 2 000 000 L S 0 g Ś 2 m

A: Unit conversion means convert one form in to another. In the given question, it has been asked to…

Q: 2. A stone of mass 9.71 g is dried in an oven at 100.0°C. It is dropped in an insulated graduated…

Q: 4. Convert 0.0102 lb/in³ (pounds per cubic inch) to mg/mL using dimensional analysis.

A: The conversion of quantity from one unit to another unit is known as unit conversion. During the…

Q: If a large marshmallow has a volume of 2.50 in^3 and density of 0.242 g/cm^3, how kuch would it…

A: GIVEN: Volume of marshmallow= 2.50 in3 Density= 0.242g/cm3 To calculate: weigh of marshmallow

Q: 4. Calculate the error and percent error of a sample of water using the following data: the actual…

A: we know , Error = Experimental Value-theoretical Valuetheoretical Value Given ,…

Q: 5. Consider an industrially important enzyme, which catalyzes the conversion of a protein substrate…

A: To answer this question we have to know the Michaelis-Menten kinetics, The steps for the kinetics…

Q: 16. Convert 233 mL to cubic inches. O 12.20 cu. in. O 14.20 cu. in. O 16.20 cu. in. O 18.20 cu. in.

Q: Compare the surface area and volume of 1/8-inch, 1/4-inch, and 1/2-inch diameter rusty spheres using…

A: To calculate the Total area and total volume , we need radius of sphere . As we have given diameter…

Q: Q2. A beaker containing 28.6mL of acetone was added to a beaker containing 228.2mL of ethanol.…

A: The volume of the acetone (solute) is 28.6 mL.The volume of ethanol (solvent) is 228.2 mL.The…

Q: The dose of a drug is 50 mg/kg of body weight once daily for 7 consecutive days. For a child…

A: I lb is equal to 0.454 kg. We have to determine volume in ml in 500 mg of drug.

Q: Multiply or divide the following measurements. Be sure each answer you enter contains the correct…

A: Multiply or divide the given measurement.

Q: Use the volume measured for the 90-drop data and calculate the volume (mL) for each drop of water.…

A: Given : 30 drops = 1.5 mL 60 drops = 2.8 mL And 90 drops = 4.4 mL

Q: Jane in the stockroom counted all of the 400 mL beakers. After counting twice she came up with 857…

A: Rules for determining the number of significant figures: 1. All non-zero digits are significant. 2.…

Q: In a graduated cylinder, if the lowest part of the liquid meniscus falls SLIGHTLY ABOVE the line for…

A: Given, The lowest part of the liquid meniscus falls slightly above the line for 5.71 mL, and the…

Concept explainers

Matter and Measurement

In the universe, there is matter, energy, and void space. The universe contains energy and void space. The definition of matter can be considered as something which possesses mass and consumes space. Chemistry is that branch of science which deals with the study of matter. Under chemistry, nature, composition, and the changes occurring to matter are discussed.

Question

---

### Measurement Precision in Laboratories

When conducting experiments that require precise measurement of liquids, choosing the right tool is crucial. The following question is geared towards evaluating the correct tool for measuring a specific volume of liquid accurately.

#### Question:
**You need to precisely measure 10.0 mL of liquid. What tool should you use?**

#### Options:
1. **50 mL graduated cylinder**
2. **1 mL volumetric pipette (measured 10 times)**
3. **10 mL graduated cylinder**
4. **Beaker**

### Explanation:
- **50 mL graduated cylinder**: This tool can measure 10.0 mL, but it is not the most precise option because its larger scale divisions are less accurate for measuring small volumes.

- **1 mL volumetric pipette (measured 10 times)**: This would be very time-consuming and increase the chance of cumulative measurement errors.

- **10 mL graduated cylinder**: This is the most appropriate choice because it is designed specifically to measure 10.0 mL with higher accuracy.

- **Beaker**: Beakers are generally not used for precise measurements as they are designed for rough volume estimates.

When measuring liquids in laboratory settings, always select the tool that offers the greatest precision for the specific volume you need.

---

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, chemistry and related others by exploring similar questions and additional content below.

Similar questions

5. Calculate the volume of a 30.0 g liquid with a specific gravity of 0.90. a 27.0 mL b 33.3 mL c 27 mL d 33 mL
How to convert? how to convert 1.06mM to mM/mg of sample. I've weighed 100 mg of sample and I diluted in 1 milliliter of water. the molecular weight of the acid (sample) is 116.16g/mol
Please don't provide handwriting solution
Y Part C aspirin with [H3O+] = 6.5 x 10 M Express your answer using two significant figures. Y VE ΑΣΦ Submit Part D Request Answer IVE ΑΣΦ 1 Submit 9 pancreatic juice with [H3O+] = 3.5 x 10 M Express your answer using two significant figures. → O Provide Feedback Request Answer ar Ű ? ? Copyright © 2023 Pearson Educatio
A class of chemistry students measured the density of an unknown liquid. If the correct density of the sample is 1.14 g/mL, what is the percent error for their average experimental density? Group Density (g/mL) 1 1.033 1.185 1.075 4 1.026 1.135 1.022 %E = 94.6% %3D %E = 5.4% %3D %E = 6.1% %E = 5.7%
The dose of a drug is 50 mg/kg of body weight once daily for 7 consecutive days. For a child weighing 90 lbs., the volume of a syrup containing 250 mg of drug per teaspoonful to be prescribed is _____ mL.
Please answer number 2. Thanks
Please put the correct number of significant figures. Thank you
The speed of sound varies according to the material through which it travels. Sound travels at 6.0x 10¹ m granite. Calculate each of these speeds in Note: 1 ft-12 in Note: Reference the SI prefixes and Conversion factors for non-SI units tables for additional information. Part 1 of 2 Round your answer to 2 significant figures. Speed in rubber: 60 x 10 Part 2 of 2 m Round your answer to 3 significant figures. Speed in granite: 1.64 10 through rubber and at 1.96 x 10 ft through
buret delivers water at 25 C from the 0.05 mL mark down to 20.00 mL. The mass of the water is measured to be 20.000 g. What is the correction for this buret at 25 ml?
how to convert 4507 kg m^3 into g/mL
Use Correct significant digits please