Water (7.7 L/min) is flowing in a tube "D = 3 cm, L= 5 m" and is to be heated from 15°C to 62.1°C by applying a uniform heat flux on the outer surface of the tube by electric resistance heater. What is the power rating of the resistance heater (kW)? If turbulent flow use Dituss- Boetler relation Nu= 0.023 Re0.8 Pr". Properties : p = 992.1 kg/m³ , C, = 4179 J/kg.°C, k = 0.631 W/m°C, Þr = 4.32, v = 0.658E-6 m²/s

Water (7.7 L/min) is flowing in a tube "D = 3 cm, L= 5 m" and is to be heated from 15°C to 62.1°C by applying a uniform heat flux on the outer surface of the tube by electric resistance heater. What is the power rating of the resistance heater (kW)? If turbulent flow use Dituss- Boetler relation Nu= 0.023 Re0.8 Pr". Properties : p = 992.1 kg/m³ , C, = 4179 J/kg.°C, k = 0.631 W/m°C, Þr = 4.32, v = 0.658E-6 m²/s

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

I need the answer as soon as possible
3 Water at 15°C (p = 999.1 kg/m , cp = 4.18 kJ/kg.K and u = 1.138E-3 kg/m.s k = 0.631 W/m.°C) is flowing steadily in a 4.3-cm-diameter, 9.9- m-length horizontal pipe made of stainless steel, the outer surface is subjected, to a uniform heat flux of 6.2 kW/m". Assume fully developed %3D %3D %3D flow. What is the surface temperature when the exit temperature is 55 (°C)? Select one: А. 150.32 B. 131.90 C. 140.63 D. 110.59 O E. 121.25
Shown in the figure,a card is cooled with water. To cool the cardWater 0.4 m / s in the circular pipe system placed on the bottomaverage speed and entering at a temperature of 20 oC, at a temperature of 24 oCcomes out. Electronic components on the board of 1.5 kWthey produce energy. At the same time, from the card surface to the mediumApproximately 0.05 kW of heat loss occurs by convection. Continuous flowFind the mass flow rate of the water for the conditions. Specific heat of waterYou can get = 4.22 as ?? / ???.
Water (5.2 L/min) is flowing in a tube "D= 3 cm, L= 5 m" and is to be heated from 15°C to 59.9°C by applying a uniform heat flux on the outer surface of the tube by electric resistance heater. What is the power rating of the resistance heater (kW)? 0.8 II If turbulent flow use Dituss-Boetler relation Nu= 0.023 Re Pr. 3 Properties : p = 992.1 kg/m , C 4179 J/kg. °C, k=0.631 W/m°C, Pr= 4.32, v= 0.658E-6 m /s Select one:
An incompressible fluid flows through a rectangular cross section duct, with width much larger than height of the cross section. The duct surface is heated at a uniform rate along its length. If the centreline of the flow is along the centre of the duct where y = 0, the distance from the centreline to the surface of the duct is b = 25 mm, and the thermal conductivity of the fluid is 0.6 W/mK, what is the local heat transfer coefficient in the developed region of the flow? Give your answer in W/m2K to 1 decimal place. I AM POSTIING THIS AGAIN. PLEASE STOP ? COPY FROM INTERNET AND SEND RANDOM SOLUTION. HINT THE FINAL ANSWER IS 38.4 But i need step by step solution. if you don't get this value don't send it please, reject and add the credit
B9
For a hydrodynamically and thermally fully developed laminar flow through a circular pipe of constant cross-section, the Nusselt number at constant wall heat flux (Nug) and that at constant wall temperature (NuT) are related as A. Nug > NuT C. Nug = (Nuf)² B. Nug < NuT D. Nug = NuT
Water is to be heated from 15 C to 65 C as it flows through a 3 cm internal diameter 5 m long tube. The tube surface is subjected to uniform heat flux. If the mean water velocity is 0.236 mm/s, determine 1. The total heat transferred to water. 2. The inner surface temperature of the pipe at the inlet and the exit. Take water properties p=992.1 kg/m³, v 0.658 x 10-6 m²/ s Cp=4179 J/kg.K, Pr-4.32, Nu= 0.023Re08Prº.4 k=0.631 W/m.°C,
Water flows through a tube of diameter 30 mm at an average velocity of 1.5 m/s. The properties of water are p = 1000 kg/m³, µ = 7.25 × 10-4 N s/m², k=0.625 W/m K, Pr=5.18. Using Nu=0.023 Re0.$Pr04, the convective heat transfer coefficient (in W/m? K) is .
How is the Reynolds number related to Darcy-Weisbach?
A constant heat flux of 40 W/cm² is applied from the outside to the three surfaces (top surface adiabatic) of a 6cmx6cm square pipe. Water enters the pipe at 25°C and its flow rate is 1 kg/s. If the length of the channel is 1.5 m, what will the outlet temperature of the water be? You can get the properties of water at 320K.
Please help. I am not sure how to approach this problem. This problem involves heat transfer and internal flow within a pipe. Thank you.