toonges as aasm 12 mm thick plate is conected to two 8 mm thick plates, on either side through a 16 mm diameter power driven field rivet as shown in the figure below. Assuming permissible shear stress as 90 MPa and permissible bearing stress as 270 MPa in the rivet, the rivet 19W01 to dadig edt to value of the joint is ons aaomoins my noiemet ni injoj djiw YIVO P/24 12mm + ↑ P/2 8mm 8mm F

toonges as aasm 12 mm thick plate is conected to two 8 mm thick plates, on either side through a 16 mm diameter power driven field rivet as shown in the figure below. Assuming permissible shear stress as 90 MPa and permissible bearing stress as 270 MPa in the rivet, the rivet 19W01 to dadig edt to value of the joint is ons aaomoins my noiemet ni injoj djiw YIVO P/24 12mm + ↑ P/2 8mm 8mm F

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A plate is fastened to a fixed member by four 16mmO rivets arranged as shown. Compute the maximum shearing stress developed in the rivets. See figure 12. * 30KN 100mm spacing 30KN Figure 12
4) 4 points Calculate the minimum net area for the plate shown below connected to 14 mm thick gusset plate with 22 mm bolts. Plate 12 mm thick 35mm 20mm 20mm 150 mm 20mm 20mm 35mm „Gusset 14 mm thick 35mm 30mm 30mm 40mm a. 936 mm? b. 918 mm? c. 900 mm? d. 887 mm?
rectanqular seetion with width bz250 and depth h= 500mm is to carcry a A m %3D design bending moment M= 260KN•M, The conerete is of greade e30 and the tensile steel is of HRB400. The tension reinforzce. ment A, is requined.
From the bracket connection shown. 1. Which of the following gives the stress due to axial load. a. 62.07 MPa b. 75.56 MPa c. 52.89 MPa d. 19.34 MPa 2. What is the value of ‘b’ that will make the maximum stress due to moment equal to that due to axial load? a. 150 mm b. 200 mm c. 250 mm d. 300 mm 3. What is the eccentricity? a. 300 mm b. 250 mm c. 150 mm d. 196.78 MPa
Q2. Design a rivet that is utilized in a double riveted butt joint which connects two 12 mm thick plates. The efficiency of riveting joint is 80% and the pitch is 80 mm. If the allowable stresses for the plate material are (tensile stress o 100 MPa, shear stress - 75 MPa, bearing stress oc= 180 MPa) and for the rivet material are (tensile stress o-120 MPa, shear stress T-90 MPa, bearing stress 6 = 200 MPa), use F.S. = 1.
The tension member shown in figure below consists of steel pipe,A which has an outside diameter of 150mm and inside diameter of 120mm and a solid aluminium alloy bar, B which has an outside diameter of 100mm. Determine the average bearing stress between the collar on bar B and the flange on pipe A. A 300mm 120KN 400mm B 240kN Solution; [Ans : OB = 104.2 MPa]
_Find: (a) the stress in the Steel and Ahuminium rods after the loap P applied and the temprature raised 60 C" and (b) the displacement under the load P. Using the data in the Table below. Rod A (mm) a (um/m. C°) L (m) d (m) 0 (degree) E (GPa) P (kN) Steel 400 T1.2 195 3 35 Aluminium 300 18.9 4 30 90 Aluminium Steal 4m 2m
I need a clear answer by hand, not by keyboard and fast answer within 20 minutes. Thank you | dybala For the beam loaded as shown, find the maximum tensile and compressive bending stresses and maximum shearing stress.. IN.A=4*10mm* 80mm 100mm 60mm 60mm 1.5KN 2kN/m 1mal A |-----|- | Im ++ Im->> 3m 3kN/m
2m 2m 12₂ 2m y 2N/m ✓ 2N/m 2m $ بلا
A steel bar of 5 mm is heated from 15° C to 40° C and it is free to expand. The bar Will induce E Snipping Tool Options New D Mode - O Delay - X Ca A : no stress Select the snip mode using the Mode button or click button. B : shear stress Snipping Tool is moving.. C: tensile stress In a future update, Snipping Tool will be movir home. Try improved features and snip like usua & Sketch (or try the shortcut D: compressive stress
20MPA a In Figure , according to the stress condition of a stack of I-section beam. (30Mpa is the shear stress value.) 30MPA I- 40MPа 1-)Calculate the principal stresses, location and angle. A 2-)Calculate the stress components that will affect the plane in a section a-a that makes a 300 angle shown in the figure.
For the rivet connection shown in figure 2-4, the allowable shearing stress in the 25mm rivets is 140 MPa. Assume the plates are adequate to transmit the load to the rivets. P= 60 KN. a) Determine the shearing stress in the most stressed rivet. b) Determine the maximum allowable value of P. c) If P=80 KN, determine the minimum diameter of rivets. USE NSCP 2015. Thanks.