To cool hot oil, an engineer has suggested that the oil be pumped through a pipe submerged in a nearby lake. The pipe (external diameter = 15 cm) will be placed in the horizontal direction. The temperature of the outer surface of the pipe averages 125 ° C. The surrounding water temperature is assumed to be constant at 15 ° C. Pipe length 100 m. If it is assumed that there is

Q: ater flowing at 0.1 kg/s through a thin-walled 50-mm diameter pipe is cooled from 400 K to 300 K.…

A: Given data: The water flow rate is m=0.1 kg/s˙ The diameter of the pipe is D=50 mm=0.05 m The…

Q: Saturated refrigerant 134a flows in the evaporator tube at 2 °C. The evaporator is made of thin…

A: Write the given data with suitable variables. T°=2 °Cd=1 cm=0.01 mD=2.5 cm=0.25 mT∞=25 °Ch=40…

Q: Resolving of Example (1-3) Two reservoirs with a difference in elevation of 15 m are connected by…

A: Length and diameter of the pipes:-Pipe 1:- Length (L1  ) = 300 m, Diameter (D1) = 0.3 mPipe 2:-…

Q: The liquid food is heated in a tubular heat exchanger. The inside pipe wall temperature is 110 °C.…

A: Given data as per question T1=1100Cinternal diameter of pipe =50 mmflow rate  =0.7 kgsInitial…

Q: Water at 27°C flows with a mean velocity of 1 m/s through a 1 km-long pipe of 0.25 m inside…

A:

Q: Consider the shell and tube heat exchanger where liquid A of density pa is flowing through the inner…

A:

Q: A composite wall is formed of a 2.5-cm copper plate (k = 386 W/m.°C), a 3.2-mm layer of 0.038…

A: Note:As per our guidelines we are supposed to answer only one question. Kindly repost other…

Q: Solve for the latent heat of water at Tw = 28C (and. λw = 2435 kJ/kg)

A: Step 1: The latent heat of water at 28℃ is not given directly in the steam table. But at 25℃ and 30℃…

Q: 1. Are pipe systems common in engineering applications?

A: (1)   The pipe systems are most commonly used in the engineering applications in mechanical as well…

Q: A saturated steam at 410K is being transported in a pipeline (brass drawing tubing) at a rate of 1…

A: Given dataSaturated steam at 410 K flows at a rate of 1 g/s through a pipeline.Pipeline inside…

Q: Calculate the critical and actual heat flux for pool boiling of water at 2.1 bar from a surface at…

A: Given Data: Pressure P1=2.1 bar=210 Kpa Surface Temperature TW=130°C Saturation Temperature…

Q: What is the value of the heat transfer coefficient for air at 37 ° C flowing at 5 m / s…

A:

Q: Liquid ammonia is transported from a production plant to a processing center via a 0.6-m diameter…

A:

Q: 33. Water at 25 C flows in a smooth tube, having a diameter of 5 cm, at a rate of 1 kg/s. The tube…

A:

Q: 1. Calculate the lost power

A: Taking equation  d^ 2 u(x) dx^ 2 = r(x),x (1(0)= x in[0, pπ] )=u( π)=0 (1) f(x)=sin(x ) We create…

Q: A saturated steam at 410K is being transported in a pipeline (brass drawing tubing) at a rate of 1…

A: (1)Heat loss for 1 ft of pipe using resistances (2)Overall Ui using the area Ai

Q: Milk at 4 °C flows through a 0.1 m diameter, curved pipe at 20 kg s-1. The pressure drop through the…

A: Given DataT=4°Cm˙=20kg/sd=0.1mPd=710 Pa/mCP=3890J/kg°C  {taken}

Q: 2.1. Consider the flow of oil at Tol in a 40-cm-diameter pipeline at an average velocity of 0.5 m/s.…

A: Given dataTemperature of oil Toil = 200CDiameter of the pipe line D = 40cm = 0.4mAverage velocity…

Q: Water flows in a 3.5-cm-diameter pipe so that the Reynolds number based on diameter is 2000 (laminar…

A: Introduction With the help of Reynolds' number, we will determine the water's maximum velocity in…

Q: Fins are usually used in to increase the surface area of the heat exchanger so that it increases the…

A: Given: b = 2 mm tolerance =0.05 mm L = 1.5cm To find: Heat transfer area

Q: Engine oil flows at a rate of 0.95 kg/s through a tube of 119 mm inside diameter and is heated from…

A: Given data as per the question Q=0.95 kgsd=119mmTi=293 kT0=327 kasuming  density ρ of oil =900…

Q: Saturated refrigerant 134a flows in the evaporator tube at 2 °C. The evaporator is made of thin…

A: Write the given data with suitable variables. T°=2 °Cd=1 cm=0.01 mD=2.5 cm=0.025 mT∞=25 °Ch=40…

Q: For the one-dimensional, radial, steady heat flow through the cylindrical nnulus shown below, what…

A:

Q: Merrill et al. (1965) in a series of classic experiments studied the flow of blood in capillary…

A: τW    dynes/cm2              V S-1            0.06            0.01             0.10…

Q: A saturated steam at 410K is being transported in a pipeline (brass drawing tubing) at a rate of 1…

A: The temperature of saturated steam is .The mass flow rate is .The inner diameter of the pipe is .The…

Q: In a thermal power plant, a horizontal copper pipe of "D" diameter, "L" length and thickness 1.9 cm…

A:

Q: As part of an industrial pipe system a 6-meter-long by .5 meter inner diameter copper pipe weighing…

A:

Q: H.W5) A Figure illustrates the tube-flow system. The heat transfer under developed flow conditions…

A:

Q: Q) Engine oil at 25 degrees * C flows over a 30 cm long 20 cm wide plate at 1.5 m/s which is heated…

A: The answer is given in below step

Q: Required information Air flows in a pipe under fully developed conditions with an average velocity…

A:

Q: Engine oil enters a circular tube D=10-cm in diameter and L=23-m in length. If the flow rate and…

A:

Q: Evaluate the Nusselt number of Air at 100C (k=0.0307 W/mK). Let D=1m, V=1m/s and hc = 3W/m^2 K

A: Given data: D=1 mhc=3 W/m2Kk=0.0307 W/mK Need to determine the Nusselt number of Air.

Q: Q5: Cooling water at a steady rate of 0.5 kg/s flows through an inner tube having inner diameter of…

A: Given, Mass flow rate of cooling water = m' = 0.5 kg/s Inner tube diameter = d = 25 mm = 0.025 m…

Q: An insulated pipe, D=33-cm-in diameter and L=13-m-long, is used to transport cold air at…

A:

Q: Two circular pipes are located around a small water container as shown in the figure. Q = 0.001 m²/s…

A: Since you have asked multiple questions in a single request, we would be answering only the first…

Q: Determine the transfer coefficient for water flowing through a 1-inch pipe. inch, 16 BWG and 3 m /…

A:

Q: 6.13 Fluid at a uniform speed U flows into a channel between two parallel plates a distance d apart.…

A: Here, question 6.13 is mentioned to solve so we will solve this question for you.

Q: 21. In a repair shop compressed air is used to operate pneumatic tools. The total length of the…

A: Given Data The total length of the airline is:L=500 ft The inner diameter of smooth pipe is:I.D=0.5…

Q: Consider pressurized water, engine oil (unused), and Nak (22%/78%) flowing in a 20-mm-diameter tube.…

A: To Find: The mean velocity the hydrodynamic entry length at temperature T=366 K. Given : The fluid…

Q: The stream data for a chemical process plant that produces Ethyl Acetate is presented in Table 1. As…

A:

Q: Air at p = 1 atm enters a thin-walled (D = 5-mm diameter) long tube (L = 2 m) at an inlet…

A:

Q: Q.1) Determine the convection heat transfer coefficient and the heat flux on the plate surface for…

A:

Q: ulate total heat loss per meter length of uninsulated pipe when the water transfer coefficient is 30…

A:

Q: Water at a temperature of 20 oC with a mass flow rate of 0.015 kg/s enters the pipe 2.5 cm in…

A: Dear student, we are suppose to solve only 3 sub parts. Please post other parts as a separate…