7. Please show your complete solution. Please typewritten for upvote. Problem # 7: The steel shaft DF consists of three concentric tubes and issupported by smooth bearings at D and E. It is coupled to a motor at F,which delivers 14 kW of power to the shaft while it is running at 52 rev/sec. The gears A, B, and C remove 3 kW, 5 kW, and 6 kW, respectively.The shaft is free to turn in its support bearings D and F. Determine theshearing stress developed in segments BC and CE. (14kW6 kWOD3 kWIm5 kWHILLIConcentrictubesSTAUTIITUTTCEFr₁ = 32 mmTo = 36 mm20 mm== 25 mmr₁ = 26 mm<= 30 mm

We have to calculate shear stress for BC & CE. Shear stress - it is force per unit area that is…

The steel shaft DF consists of three concentr nooth bearings at D and E. It is coupled to 14 kW of power to the shaft while it is run A, B, and C remove 3 kW, 5 kW, and 6 kV e to turn in its support bearings D and F. eveloped in segments BC and CE. ( GKN 14kW

The steel shaft DF consists of three concentr nooth bearings at D and E. It is coupled to 14 kW of power to the shaft while it is run A, B, and C remove 3 kW, 5 kW, and 6 kV e to turn in its support bearings D and F. eveloped in segments BC and CE. ( GKN 14kW

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: or the machine elem gravity.

A: Given:- machine element To find:- y cordinate of the center of gravity

Q: What does the pacer test look for?

A: Answer - The PACER fitness exam is an excellent method for encouraging kids to love exercise. It…

Q: H = 20 m Calouk f = 0.0012 D = 250 mm L = 50 m f = 0.0012 D = 80 mm L = 50m f = 0.001 D₁ = 150 mm L…

A: I have solved your problem

Q: A car is traveling around a circular track of 670-ft radius. If the magnitude of its total…

Q: 4m 20 KN 43 5 kN/m E = 200 GPa I = 2X 108 MMY

A: Using superposition theorem

Q: Two clay specimens A and B, of thickness 2cm and 3cm, have equilibrium voids rations 0.68 and 0.72…

A: Given: For Clay specimens A : initial void ratio, eo = 0.68 final void ratio, e = 0.50 So,…

Q: For the loading shown, use the double-integration method to determine (a) the equation of the…

Q: Que :- Find flow speed and depth of water above a hump in the Figure Q3. Calculate critical depth,…

A: Given :

Q: Sp. gravity 0.925 an foo L

Q: Problem 4. Derive the expression for the offset y of any point of the curve above the beginning of a…

A: Given:- A vertical curve is given with Initial grade = g1 Final grade = g2 Point of curvature =…

Q: A steel beam 12m long is fixed at both ends and carries a superimposed uniformly distributed load of…

A: Given: Length of beam = 12m, UDL = 35kN/m W18X46 beam

Q: 5. A vertical sag curve consists of an initial grade of -3.5% with a final grade of +0.5%. The…

A: Given:- An initial grade of the sag curve = -3.5% A final grade of the sag curve = +0.5% The…

Q: A saturated clay sample in an oedometer is under vertical pressure of 120 kPa and is at a normally…

Q: ckwise moment of 50 KN-m (point D) at a distance of 4 m from the left support A respectively. Find…

Q: ouble tee cross section is used for the beam shown below. Assume the following lengths and loads: 14…

Q: Normaly length of rail road is 40-42 and max speed density is n+6 1 yard equal 3ft

Q: What are all of the zero forces?

A: Zero-Force Members- ZFM These are those structural members that do not support any loading.…

Q: Calculate the coefficient of permeability of a soil sample 6 cm in height and 50 cm2 in cross…

Q: The beam shown in the Figure q2 below is a continuous beam of 2 spans. Determine the reactions at…

Q: A composite beam is made of two brass [E = 105 GPa] plates bonded to an aluminum [E = 63 GPa] bar,…

A: Given data Eb = 105 GPA EAl = 63 GPA M= 1525 Nm = 1525 × 103 N-mm

Q: Problem 2: A steel pressure vessel with radius r (used approximately as inner, median and outer…

A: Given :

Q: Which of these is NOT a required device/information for the horizontal angle measurement? a)…

A: Answer is C - Reflector as it's not required to take horizontal angle measurement, other than this…

Q: The four columns shown below have the following loads and dimensions (in the directions shown):…

A: Hi! Thank you for the question As per the honor code, We’ll answer the first question since the…

Q: A compression spring is made of music wire of 2 mm diameter having a shear strength and shear…

Q: obtain the resultant stresses acting at a point. Consider both in-plane and out-of-plane shear…

A: GIVEN DATA:-⇒P= 40 KN⇒V= Transverse load = 13 KN⇒L= beam length= 2m⇒W 310×52 steel

Q: Design of Concrete beam A rectangular beam has a width of 375mm and has an effective depth of 450…

A: please look into the solution

Q: The slotted arm OA forces the small pin to move in the fixed spiral guide defined by r = KO where is…

A: Acceleration: The rate of change of velocity with time is known as Acceleration. The change in…

Q: 3. A simply supported beam of 6 m, see cross-section below is subjected to a concentrated load of…

A: Using bending equation

Q: 8. Which of the following statements about the setting of seismic joints is incorrect

A: During an earthquake, a complex building can be divided geometrically into smaller components that…

Q: Can you add the datum line in the illustration and make a bettter illustration based on solution

A: Given, Angle made by nozzle = 45o Horizontal distance = 15 to 20 m

Q: 5.1 through 5.11 Determine the axial forces, shears, and bending moments at points A and B of the…

Q: Example: the low cycle fatigue of a certain steel is given by life cycle equation-2: (of/E)=0.005…

A: Given data:- The fatigue strength of steel σf/Modulus of elasticity(E), σfE=0.005 The fatigue…

Q: The spiral angle at the S.C. of a spiral easement curve is equal to 12°, with a radius of the curve…

Q: 1.What are types to Design the Rigid pavement. 2. How these designs are differ to each other. 3.…

A: Hi! Thank you for the question, As per the honor code, we are allowed to answer three sub-parts at a…

Q: Q.1:Answer only one from a & b: a: At a certain point in a stressed body, the stresses are o, 400…

Q: Problem: Trigonometric leveling (base of object is accessible) In order to determine the quantity of…

Q: A tubular post of outer diameter d₂ is guyed by two cables fitted with turnbuckles (see figure).…

Q: A tape 30 m long, 0.6 cm wide and 0.5 mm -1000 m at a temperature of 20°C with 120N tension force,…

A: Given:- The length of the tape = 30 m The width of the tape = 0.6 cm = 0.006 m The thickness of…

Q: 103+51.05 103+53.01 103+47.56 103+49.89

A: 103 + 51.05

Q: a. Determine the centroid of the composite figure. b. Calculate the moment of inertia with respect…

A: Given data:-

Q: The accompanying tabulation gives elevations of points over the area of a 30m x 30m city lot. The…

A: The contour is drawn below

Q: The sprinter begins from rest at position A and accelerates along the track. If the stationary…

Q: For the beam loaded as shown, draw the shear and moment diagrams. R₁ 50 kN 2 m m 7m 20 kN/m R₂ 40 kN…

Q: Determine the forces in members EH and El of the double Fink truss (positive if in tension, negative…

Q: Which of these is NOT a required device/information for the horizontal angle measurement? a)…

A: This given question is from surveying Here we are asked to find instrument/ information required for…

Q: 16 3 cm 160 8 cm 004 --t D=9 cm- Water

Q: A tape 30 m long, 0.6 cm wide and 0.5 mm thick was used to measure a distance of -1000 m at a…

Q: A reinforced concrete beam having a width of 500 mm and an effective depth of 750 mm is reinforced…

Q: Which table one property of silt soils

A: Classification of soil is done on various criteria. Some of them are : -Particle Size classification…

Q: A singly reinforced rectangular beam section 250 mm wide, 400 mm deep is reinforced with…

Concept explainers

Floor Plan Details

Floor plans are the scale drawings that show the interplay of rooms, spaces, and physical objects. They are an integral part of the house plan. They let you see how people will move around the room. Floor plans determine the suitability of space for its intended use, work through any potential issues, and redesign before moving on to more comprehensive planning or constructing phases. It shows the different alternatives and perspectives related to the location and dimension of rooms, windows, doors, kitchen and all other things as per the requirement by the user. Many consultants give their own floor plans as reference to the clients for a better idea and to develop good floor plans.

Question

7. Please show your complete solution. Please typewritten for upvote.

Problem # 7: The steel shaft DF consists of three concentric tubes and is
supported by smooth bearings at D and E. It is coupled to a motor at F,
which delivers 14 kW of power to the shaft while it is running at 52 rev/
sec. The gears A, B, and C remove 3 kW, 5 kW, and 6 kW, respectively.
The shaft is free to turn in its support bearings D and F. Determine the
shearing stress developed in segments BC and CE. (
14kW
6 kW
O
D
3 kW
Im
5 kW
HILLI
Concentric
tubes
S
TAUTIITUTT
CEF
r₁ = 32 mm
To = 36 mm
20 mm
== 25 mm
r₁ = 26 mm
<= 30 mm

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

Q2 A flanged bolt coupling joins two shafts. It consists of eight 22-mm diameter bolts on a bolt circle 320 mm in dia- meter and six 15-mm diameter bolts on a concentric bolt circle 240 mm in diameter. Determine the unit stress in each bolt due to a torque of 25 kN.m.
The copper pipe has an outer diameter of 50mm and an inner diameter of 30mm. If it is fixed at A and three torques are applied to it as shown, solve the shear stress at section 1. A 200mm 250mm 3. 30 N-m 300mm 20 N-m 80 N m O 2.34MPA O 7.49MPA O 4.68MP O 3.74MPA
*R9 4. Two A36 steel pipes, cach having a cross-sectional area of 200 mm, are screwed together using a union at B as shown. Originally the assembly is adjusted so that no load is an the pipe. If the union is then tightened so that its screw, having a lead of 0.55 mm, undergoes two full turns, determine the average normal stress developed in the pipe. Assume that the union at B and couplings at A and C are rigid. Neglect the size of the union. Note: The lead would cause the pipe, when unloaded, to shorten 055 mm when the union is rotated ane revolution. -09m- a6 m.
The staves or vertical members of the wooden tank are held together using hoops having a thickness of 19 mm and a width of 54 mm. The spacing of hoops is 291 mm. The wooden tank has a radius of 479 mm. Determine the stress in hoops (kPa) if the tank is subjected to an internal gauge pressure of 17 kPa and this loading is transmitted directly to the hoops. s/2 s/2 AC B-
F =75 kN The journal bearings at A and D exert only x and z components of force on the shaft. Determine the shaft's diameter to the nearest millimeter so that it can resist the loadings without exceeding an allowable: 100 mm (Radius) 200 mm B 150mm (Radius) a) Shear stress of tallow= 80 MPa. 250 mm b) Von Mises stress of oallow = 200 MPa. F. =5 kN 300 mm Note: According to the maximum distortion energy theory of failure: 1 4 (4M² + 3T2) C = Tállow2
An 800 N-m couple is applied to the flywheel asshown. The coefficient of belt friction is 0.20. Theminimum force P required to prevent rotation of theflywheel is applied.a.) Which Tension is larger, TA or TB? Explain why.b.) What is the angle of contact in radians?c.) What is the value of the ratio TA/TB?
3. ( The A-36 hollow steel shaft is 2 m long and has an outer diameter of 40 mm. When it is rotating at 80 rad/s, it transmits 32 kW of power from the engine E to the generator G. Determine the smallest thickness of the shaft if the allowable shear stress is 140 MPa and G = 75 GPa and the shaft is restricted not to twist more than 0.05 rad. E G 4
Aload Pissupported by a structure consisting of rigid bar ABC, two identical solid bronze [E = 17400 ksi] rods, and a solid steel [E = 30600 ksi] rod, as shown. The bronze rods (1) each have a diameter of 0.79 in. and they are symmetrically positioned relative to the center rod (2) and the applied load P. Steel rod (2) has a diameter of 0.52 in. Assume L1=39 in and L2=77 in. If all bars are unstressed before the load Pis applied, determine the normal stresses in bronze rods (1) and steel rod (2) after a load of P = 29 kips is applied. |(2) (1) L2 (1) B. Answers: i ksi. ksi.
system at point A. Then determine the distance: Reduce the given loading system to a force-couple to the right of point A at which the resultant of the Reduce the given loading system to a to the right of point A at which the resultant of the three forces acts. 720 N 800 N 200 mm 500 mm 450 mm 1200 N
Question-6b, A leaf spring is required to have a span of 2.0 m. Determine the required thickness (in mm) of each plate if the maximum stress should not exceed 120 MPa and the maximum central deflection should not exceed 12 mm. (Take E 200 GPa)
A transmission tower is loaded as shown in the figure JCZ-1. Assume roller support at A and hinge support at B. Determine the stresses at member CE and DF.
QUESTION 2 a) A solid alloy shaft 5cm diameter is to be coupled in series with a hollow steel shaft of the same external diameter. Find the internal diameter of the steel shaft if the angle of twist per unit length is to be 75% of that of the alloy shaft. Determine the speed at which the shafts are to be driven to transmit 200kW, if the limits of shearing stress are to be 55N/mm2 and 75N/mm² in alloy and steel respectively. Gsteel = 2.2Galloy b) A simply supported beam of span 20m carries two concentrated loads 4kN at 8m and 10kN at 12m from one end as shown in Fig. 2. Calculate (a)the deflection under each load, (b) the maximum deflection, E = 200 000 N/mm2; I= 10° mmª 4KN 10KN 8m 4m Y 20m