The reinforcement steel consists of 5 bars with each having a diameter of 13.75 mm. Take pb-0.425.a) Determine the failure type of RC rectangular beamb) Calculate the ultimate moment capacity (Mr)429.27 mmA$₁aaaa202.52 mm33.50 mmC16/S420Yme = 1.5Yms = 1.15Q2.The beam given in Q1 is subjected to 23.05 kN dead load distributed over the 4.72 meter span of the beam. Live load is 7.20 times thedead load. Determine if this beam can safely resist the moments created by the given loads.

diameter= 13.75 mmpb=0.425ymc =1.5yms =1.15NOTE:Since you have posted multiple questions, we will…

The reinforcement steel consists of 5 bars with each having a diameter of 13.75 mm. Take pb=0.425. a) Determine the failure type of RC rectangular beam b) Calculate the ultimate moment capacity (Mr) 429.27 mm A$₁ aaaa 202.52 mm 33.50 mm C16/S420 Yme = 1.5 Yms = 1.15

The reinforcement steel consists of 5 bars with each having a diameter of 13.75 mm. Take pb=0.425. a) Determine the failure type of RC rectangular beam b) Calculate the ultimate moment capacity (Mr) 429.27 mm A$₁ aaaa 202.52 mm 33.50 mm C16/S420 Yme = 1.5 Yms = 1.15

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: ng soll samples and testing the soll pre 5 days per project. The duration varies and follows a…

Q: etermine the required slope if the channel is trapezoidal with depth equal to the width of the…

A: DATA GIVENQ = 2.1 m3/sec" data-mce-style="display: inline-block; line-height: 0; text-indent: 0px;…

Q: Problem 5 A layered soil is shown in Figure P4.26. Estimate the equivalent permeability (cm/sec) for…

A: 4 layers of soil having different permeability is given z1 = z2 = z3 = z4 = 3 ftK1cm/s k2 = 2 ×…

Q: For the following indeterminate frame (with SI = 1) determine the reactions then draw the shear and…

A: Static indeterminacy(SI)=1 andEI= constant

Q: 1.5 m E A -2 m- 3 kN D B -2 m- C

Q: calculate the irrigation interval if

Q: steel tube. Total axial deformation is 1 hat is the compressive load, P? Assume: uter dia. =1" nner…

A: Given data :Length of member (L)=20inAxial deformation = 0.5inModulus of elasticity of the steel is…

Q: After the soil samples are taken and the soil properties determined, the engineer must design the…

A: Project management - Soil Samples, testing and designing a foundationthe soil sampling and testing…

Q: f 20,000 will be 300 mg/L. It is estimated that the per capita BOD loading is 0.17 lbm/day. 30% f…

Q: The Advantages and disadvantages of Flat Slab System

A: A flat slab system is a type of reinforced concrete slab that does not have beams or girders, and…

Q: *6-20. The compound beam is subjected to a uniform dead load of 200 lb/ft and a single live load of…

A: Draw influence line diagrams,

Q: A Click Submit to complete this assessment. Question 5 At what Horizontal Distance (HD) in feet from…

A: Rod reading is given we need to find out the Horizontal Distance

Q: 500-ft curve, grades of g₁ = +2.50% and g₂ = -3.00%, Pl at station 96 + 80 and elevation 835.26 ft,…

A: g1=+2.5%g2= -3.00%L=500ftVPI station =96+80Elevation= 835.26ft

Q: Discuss the benefits of using Building Information Modelling in the design workflow.

A: Building Information Modelling (BIM) is a digital representation of physical and functional…

Q: Problem 2: The beam is loaded as shown below. Determine the slope and deflection at a point located…

A: Given:Required:Deflection at 2m from left end

Q: 9.3-23 The beam shown in the figure has a support at A and a roller support at B. The support…

A: Draw FBD:Calculate Bending moment equation:

Q: 1- The Advantages and disadvantages of Post & Beam Construction

A: Post and beam construction is a traditional building method that involves vertical posts supporting…

Q: What is the maximum vertical shear in the beam? 4m 40 kN 4m 10 kN B 4m

A: Overhang beam is given, we need to determine maximum vertical shear in beam.

Q: Design the concrete mix according to the following conditions: Design Environment • Building beam o…

A: Required design strength = 27.6 MPaStandard deviation of 2.1 MPa is expected (more than 30…

Q: Calculate the omitted lengths of the lines of BC and CD of a closed traverse ABCDEA, using the…

Q: Draw the shear and moment diagrams for the beam. 150 lb-ft 250 lb/ft -20 ft B 150 lb-ft

A: A simly supported beam is loaded as follows

Q: 6-14 to 6-17 Refer to Figs. P6-14 to P6-17. Determine the components of the resul- tant of the two…

Q: 3. The uniformly distributed vertical loads on the surface of a clay layer as shown in Figure below.…

A: For the given loaded area .We will first calculate the radial distance from point of consideration ,…

Q: The steel beam W16x67 shown is laterally supported along the fu compression flange. Determine…

Q: 3. A lake with constant volume 10*106 m³ is fed by a pollution-free stream with flow rate 50 m³/s. A…

Q: Determine the cracking moment for the section shown if fe' = 28 Mpa. (Ans. 46.30 kN-m) 2025 300 mm-…

A: Given:Required:Cracking moment

Q: Discuss the significance of wireframing and prototyping in the planning phase.

A: We need to explain significance of wireframing and prototyping in the planning phase.

Q: 3. A settling tank has an overflow rate of 100,000 gal/^2 d. Water carrying sediment of various…

Q: What is "Superpave"? A type of asphalt concrete mix Paving using very heavy equipment Paving using a…

A: Given: What is "Superpave"?A type of asphalt concrete mixPaving using very heavy…

Q: Span of the truss between support = 46 ft Height of columns = 20 ft Distance between two trusses =…

A: Span of the truss between support = 46 ftHeight of columns = 20 ftDistance between two trusses = 23…

Q: [15]. Convection is commonly classified into three sub-modes: Forced convection, Natural (or free)…

Q: The following convergence measurements (U) have been made in a 4.6-m-diameter circular vertical…

Q: B f 900 lb 2 ft 200 lb/ft 6 ft The properties of the timber cantilever beam ABC are I = 60 in.4 and…

Q: In the context of a sewer system, you need to find the optimal diameter (DD) of a pipe to meet a…

Q: A one way cantilever slab having a simple span of 2.0 m. The slab is to carry a uniform dead load…

Q: You are asked to design a square footing that will be placed 5 feet below the ground surface in…

A: iven

Q: can you use Artesian formula

A: Given Radius of influence = 350 mdiameter = 30 cmlength = 25 mPermeability = 45 m/dayDrawdown = 4 m…

Q: 1.-) Draw the shear force and bending moment diagrams for the beam. A 5 pies- 6 kip -6 pies- 12 kip…

Q: The acceleration-time relationship for a vehicle subjected to non-uniform acceleration is, dv = =…

Q: Briefly explain what 'half-life' is. Then, use the following expression of batch system (zero-order…

A: Half Life : Half-life is the amount of time taken for the decay of a substance to decay from intial…

Q: Draw the isometric figure of the given multiview projection. HRP FRP Top I

A: Isometric view is a three-dimensional representation of an object in engineering drawing. It…

Q: Give three examples of different types of tensile structures and their application

A: A tensile structure is a type of construction characterized by elements such as cables, membranes,…

Q: The design of a concrete mix requires 1173 kg/m3 of gravel in dry condition, 582 kg/m3 of sand in…

A: The expression for mass of mix water is given asHere, is the water content, is the gravel content,…

Q: The pipe ABCDE is supported by ball-and-socket joints at A and D and by cable ECF that passes…

A: Given:Required:Force diagramMagnitude of concentrated force FCDTension forces in terms of TNote: As…

Q: A horizontal circular curve with a central line radius of 200 m is provided on 2 lane two way SH…

Q: On the given beam, find the following unknowns use the SLOPE DEFLECTION METHOD. Assume that E is…

Q: A spherical object of 1.5 m diameter is completely immersed in a water reservoir and chained to the…

A: For a spherical object,diameter, D= 1.5 mThe object is completely immersed in water reservoir…

Q: 7-10. Determine the slope at B and the maximum displacement of the beam. Use the moment-area…

Q: A 500-ft curve, 91 = -2.00%, g2 = +3.00 %, VPI station = 98 + 10, VPI elevation = 5388.26 ft,…

A: g1 = -2.00%g2= +3.00%L = 500ftPvi elevation = 5388.26ftPvi station = 98+10

Q: Calculate the slope and deflection atB and E of the beam and loadings shown using conjugate beam…

Concept explainers

Pricing Concrete Work

The concrete work in a project usually holds a high-end cost in terms of cost and value of the work. It becomes an important step in calculating the cost associated with concrete while preparing the project scale. The cost of making concrete depends on the cost of building materials, mixed materials, labor, and machinery. A concrete contractor builds structures from concrete, usually managing all the steps of the process from assembling ingredients to building a holding structure and preparing the mixture. This person or team oversees the delivery and unloading of goods to ensure that they are done properly. Nowadays, most of the concrete in the United States comes from manufacturers working abroad, usually with branches and plants within the provinces. Contributions can range from pre-mixed concrete to basic ingredients, the consumer company then mixes it. Many American-based concrete companies, however, offer concrete products, such as ballads, bricks, countertop, concrete pipe, and building products, as well as concrete construction and installation materials. This article covers both types of suppliers for this set of building materials.

Question

The reinforcement steel consists of 5 bars with each having a diameter of 13.75 mm. Take pb-0.425.
a) Determine the failure type of RC rectangular beam
b) Calculate the ultimate moment capacity (Mr)
429.27 mm
A$₁
aaaa
202.52 mm
33.50 mm
C16/S420
Yme = 1.5
Yms = 1.15
Q2.
The beam given in Q1 is subjected to 23.05 kN dead load distributed over the 4.72 meter span of the beam. Live load is 7.20 times the
dead load. Determine if this beam can safely resist the moments created by the given loads.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1: Mention the given data:

VIEW

Step 2: a) Determine the failure type of RC rectangular beam:

VIEW

Step 3: b) Calculate the ultimate moment capacity :

VIEW

Solution

VIEW

Step by step

Solved in 4 steps with 4 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

= BA The solid steel shaft carries the torques T₁ 750 N-m and T₂ 1200 N-m. Using L₁ L2 2.5 m and G-83 GPa, determine the smallest allowable diameter of the shaft if the shear stress is limited to 60 MPa and the angle of rotation of the free end is not to exceed 40. (Hint: Analyze for 0 governs and T governs). Odmin 54.1 mm = Odmin 46.7 mm B Odmin = 51.9 mm Odmin 26.0 mm 7₁ B C 1₂
ASAP
3. The center post B of the assembly has an original length of 124.8 mm whereas posts A and C have a length of 125 mm. If the caps on the top and bottom can be considered rigid, determine the average normal stress in each post. The posts are made of aluminum and have a cross sectional area of 400 mm². Ea=70 GPa. Use the Force Method 100 mm -100 mm 800 kN/m 125 mm 800 kN/m
Q3) The beam system has a pin support at A, roller supports at D and F, and internal hinges at C. Find the deformations at C and E using the conjugate beam method. 10 kN A C D E F 100 kN-m k5 mt-5 m--5 m5 m-k10 m- = 100 x 10° mm*, and ICF Given: E = 200 GPa, IAC 50 x 10° mm“. %3D لقطة شاشة
An assembly of bars are designed in Figure 1. The assembly is made of structural A-36 steel where bar AB and BC has a drameter of 50 mm. ASTM and 25 mm The respectively. determine дар between C and the rigid wall at D is initially 0-15 mm, the support reaction at A and D when the force P= 292 kN is applied at B 600mm 450mm 292- A B D
回の shear stress tmax in any of the three bars? P3 9 m P 135° up. (D 135° 90 dz s applied Knowing the steel the steel 09. A circular steel tube of length L = 0.90 m is loaded in torsion by torques T. s in the (a) If the inner radius of the tube is r, = 40 mm and the measured angle of twist between the ends is 0.5°, what is the shear strain y1 (in radians) at the inner surface? (b) If the maximum allowable shear strain is 0.0005 rad and the angle of twist is to be kept at 0.5° by adjusting the torque T, what is the maximum permissible outer radius (r2)max? B 12 mm is to be of ACR
A rectangular beam has the following properties: fc'=28MPa fy=270MPa b=300mm d=450mm As=4 of 36mm diameter bars Compute For: 1.) The magnitude of the ultimate moment capacity is Blank 1 kN.m 2.) If the fc' is reduced by 50%, the depth of the concrete stress block is Blank 1 mm.
5-83 The A-36 steel shaft is made from two segments: AC has a diameter of 0.5 in. and CB has a diameter of 1 in. If the shaft is fixed at its ends A and B and subjected to a uni- form distributed torque of 60 lb in./in. along segment CB, determine the absolute maximum shear stress in the shaft. 5 in. 0.5 in. 20 in. 60 lb-in./in. 1 in. B Prob. 5-83
A rectangular beam has the following properties: fc'=28MPa fy=270MPa b=300mm d=450mm As=4 of 36mm diameter bars Compute For: 1.) The depth of the concrete stress block is Blank 1 mm. 2.) The magnitude of the nominal moment capacity is Blank 1 kN.m
/stemezcom Lec3 working stres For the beam shown below, determine the concrete and steel stresses at the locations of the maximum positive and negative moments, Use ſ'c = 25Mpa. The answers are MPa, MPa, MPa and MPa. 3okN/m 8m 1m 4-25mmØ- -Top bars -4-16mmØ 250 250 bottom bars 630 630
Calculate the maximum tensile and compressive stresses in the section of BC of the beam. 75 mm 75 mm Empedopre|72 -75 mm 150 mm 50 mm EN SAMA 00 kN B 1.0 m 60 kN -1.5 m-> rode D 1.0 m
250 mm A D P = 25 kN B 30 60 C TOP VIEW 280 mm Member AD is fabricated by joining two bars (E0=205GP,, Ga=82GPA) and is pinned to plate ABC using a 5 mm diameter pins as shown in the figure. The yield strength of the pins is T,=890MPA. Plate ABC is a right triangle and is fixed along its edge BC. A 25KN Force P is then applied at end D causing a lateral strain in member AD with magnitude equal to 7.5x10-mm/mm. This also causes Point A to displace only along the horizontal resulting to a shear strain at point A equal to y,=+0.00165rad. Determine the following: 1. Poisson's ratio of material used in member AD, vAD 2. The normal strain in member AD, caD 3. The average stress experienced by pin A, T, 4. Factor of Safety of pin A with respect to yielding, FS,A 5. Displacement of point D, A,