The projectors through the traces of a line are 70 mm apart and those of ends of the line are 35 mm apart. One end of the line is 20 mm above HP. If the top view and front view of the line make inclinations 30° and 40° respectively with XY, draw the projections and find the positions of traces. Also find the true length of the line and its inclinations with reference planes. 6.

The projectors through the traces of a line are 70 mm apart and those of ends of the line are 35 mm apart. One end of the line is 20 mm above HP. If the top view and front view of the line make inclinations 30° and 40° respectively with XY, draw the projections and find the positions of traces. Also find the true length of the line and its inclinations with reference planes. 6.

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter9: Moments And Products Of Inertia Of Areas

Section: Chapter Questions

Problem 9.43P

See similar textbooks

Similar questions

i need the isometric of this projection
AB is a straight line, the coordinates of its ends are as follows: A= (1, 2), B= (5, 4) right of A. Distance between projectors =7 cm.The horizontal trace H= (-2, 0) left of ARequired:Draw (scale 1:1) the ELEVATION and PLAN of the line and find the following:(1) Its true length.(2) The coordinate of its traces.(3) Its inclination of the H.P and V.P.(4) Check the value of H given * .in the question is it True or False
Use CREO parametric to show the projection points
A 75mm long line AB has its end A 10mm above HP and 15mm in front of VP. The line is inclined at 30 degrees to the HP while it's front view measures 50mm. Draw the projections of the line and find the length of the Top View and true inclination of the line with the vertical plane. Also find the distance of end B from the HP and VP and the distance between the end projectors.
Given the two views of a solid and an auxiliary reference plane, draw the auxiliary view and identify the plane that is in its true size in the auxiliary reference plane. HRP FRP HRP ARP
Use the given isometric view to create the front, top, and side views.
Coordinates of point P are given in the XY system. Calculate its coordinate in the UV system if the angle between them is -45 degrees. Pay = 45
Draw in full scale the front view (indicated by the arrow A), top view and right-side view ofthe following object in Third Angle Projection. Each isometric square shown on the drawingrepresents one square on the grid.
The front and side views are given of the object. Use this information to create the top view.
Draw the projection of the following points on a common reference line 1. Point R is on the VP, 40 mm above HP. 2. Point T is 25 mm above HP, 40 mm behind VP. 3. Point N is on the HP, 35 mm behind VP. 4. Point M is 35 mm below HP, 25 mm behind VP. 5. Point A is 40 mm below HP, 30 mm in front of VP.
The front and side views are given for the objects. Use this information to create the top view. Note for C the top view is given and side is missing.
3. Draw the isometric from the multi-view. Scale the drawing so that one grid unit on the iso-grid is equal to one unit on the rectilinear grid.