The mechanism shown below consists of a crank AB (the blue part) and a slotted L-shaped link (the green part). Pin B is fixed to the crank and can move freely alongthe slot. Angular velocity of the crank AB (@AB ) is 10 rad/s, and angularacceleration of the crank AB (aAB) is 10 rad/s'. 0=30°.. L1=1000mm and L2 = L3=400 mm.(a) Find the angular velocity of the slotted L-shaped link (the green part) atthe instant shown.(b) Find the angular acceleration of the slotted L-shaped link (thegreen part) at the instant shown.AWABCABL3

given data , θ =30°, αAB=10 rad / s2…

The mechanism shown below consists of a crank AB (the blue part) and a slotted L- shaped link (the green part). Pin B is fixed to the crank and can move freely along the slot. Angular velocity of the crank AB (@AB ) is 10 rad/s, and angular acceleration of the crank AB (aAB) is 10 rad/s. O=30.. L1=1000mm and L2 = L3= 400 mm.(a) Find the angular velocity of the slotted L-shaped link (the green part) at the instant shown.(b) Find the angular acceleration of the slotted L-shaped link (the green part) at the instant shown.

The mechanism shown below consists of a crank AB (the blue part) and a slotted L- shaped link (the green part). Pin B is fixed to the crank and can move freely along the slot. Angular velocity of the crank AB (@AB ) is 10 rad/s, and angular acceleration of the crank AB (aAB) is 10 rad/s. O=30.. L1=1000mm and L2 = L3= 400 mm.(a) Find the angular velocity of the slotted L-shaped link (the green part) at the instant shown.(b) Find the angular acceleration of the slotted L-shaped link (the green part) at the instant shown.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The mechanism shown below consists of a crank AB (the blue part) and a slotted L- shaped link (the green part). Pin B is fixed to the crank and can move freely along the slot. Angular velocity of the crank AB (@AB ) is 10 rad/s, and angular acceleration of the crank AB (aAB) is 10 rad/s?. O=30.. L1=1000mm and L2 = L3= 400 mm.(a) Find the angular velocity of the slotted L-shaped link (the green part) at the instant shown.(b) Find the angular acceleration of the slotted L-shaped link (the green part) at the instant shown. A WAB CAB B L3
In the crank and rocker mechanism, AD = 2½ in.; AB = 1¼ in.; DC = 1% in.; BC = 2% in. Angle BAD = 60°. (1) Name the links of this four-bar linkage. (2) Move the link AB through an angle of 30° each side of its present position and find the corresponding positions of BC and DC. (3) If the angular speed of AB is 1 rad/sec, find the angular speed of DC and BC in the position shown.
Please show graphical method representation for all questions a b and c. please.... Thank you A shaft turning at a uniform speed carries two uniform discs A and B of masses 10kg and 8kg respectively. The centres of the mass of the discs are each 2.5mm from the axis of rotation. The radii to the centres of mass are at right angles. The shaft is carried in bearings C and D between A and B such that AC = 0.3m, AD = 0.9m and AB = 1.2m. It is required to make dynamic loading on the bearings equal and a minimum for any given shaft speed by adding a mass at a radius 25mm in a plane E. Determine: The magnitude of the mass in plane E and its angular position relative to the mass in plane A The distance of the plane E from plane A The dynamic loading on each bearing when the mass in plane E has been attached and the shaft rotates at 200 rev/min. For the bearing loads in the…
The block in the figure slides in the slot in the fixed piece 1. Axis Q2 of crank Q2A is fixed on 1. AB = 4 ½ inches. Q2A and rotates in a clockwise direction. It is desired that the extreme right position of B (also the original position of the mechanism) be 6 inches to the right of a vertical line through Q2. It is proposed to make this change by altering the length of Q,A, with all the dimensions mentioned to be the same (1) Draw the linkage based on the conditions in the problem and show the degrees turned through by the crank between extreme positions. (2) Find the length of Q2A. (3) Find the other extreme position. (4) Find the length of the stroke of B. Use Kg: 1 in. = 1 in. Q2 1 Bo4 DEGREES ANGULAR DISPLACEMENT FROM A' TO A" = DEGREES ANGULAR DISPLACEMENT FROM A" TO A' = INCHES LENGTH OF Q2A = INCHES HORIZONTAL DISTANCE FROM Q2 TO B" = INCHES LENGTH OF STROKE OF B =
The elements of a power hacksaw are shown in Figure 2. The saw blade is mounted in a frame that slides along the horizontal guide. If the motor turns the flywheel at a constant counter-clockwise speed of 60 r.p.m. Make use of vector diagram to calculate: Flywheel Horizontal 450 mm Guide 100 mm Saw blade Figure 2: Power hacksaw mechanism 90°, and position where angle The corresponding angular acceleration of the link AB. 2.1. the acceleration of blade for 2.2.
In the slider-crank mechanism shown, the slide B travels along the center line XX'. Q,A = 1 ½ inches, AB = 6 inches. Crank Q,A moves counterclockwise. (1) Find the two extreme positions of B. (2) Show and dimension the angular movements in degrees of the crank Q2A when the slide B moves between its extreme positions. (3) Find the length of stroke of B. Use Kg: 1 in. = 2 cm. X' VERTICAL DISTANCE FROM Q2 TO B' = INCHES VERTICAL DISTANCE FROM Q2 TO B" = INCHES ANGULAR DISPLACEMENT FROM A' TO A" = DEGREES ANGULAR DISPLACEMENT FROM A' TO A' = DEGREES LENGTH OF STROKE OF B = INCHES
a. Which term(s) in this equation is/are eliminated if Point A is stationary? b. Which term(s) in this equation is/are eliminated if Frame A rotates with constant angular velocity? c. Which term(s) in this equation is/are eliminated if Frame A is fixed to a rigid body and Point B is a point on that body? d. From a definition of position vector FB/I = TA/I + TB/A, derive the expression for acceleration below TA/I 144 A TB/1 TB/A B B/1 = A/I +B/A+A/I XTB/A+20A/I XUB/A+WA/IX (WA/IXTB/A)
The linkage Q₂BCDEQ₄KF represents the mechanism of the Corliss non-releasing valve gear. Q₂B is a crank 3⅛- inches long oscillating to the right of fixed center Q₂. Q₂C is another crank which is 3⅜-inches long and oscillates below Q₂. Q₄ is a fixed center on a horizontal line through Q₂ and 6 -inches to right of Q₂. EQ₄K to right of Q₄E. Q₄E = 3⅝- inches and Q₄K = 5 -inches. CE is a connecting rod 3½-inches long. BD is a link 2 - inches long connecting B to link CE at D, 1 -inch. from C. KF is a connecting link 8- inches long extending to right of K and is attached to a slide block at F which moves on a horizontal line parallel to and 3-inches below Q₂Q₄. When F, moving to left, reaches a position such that K is to the left of Q₄, and Q₄K makes an angle of 15º to left of vertical, it has a velocity of 5 fps. 1.1 Draw and label the mechanism of the Corliss non-releasing valve gear. 1.2 Find the velocity K in feet per second 1.3 Find the velocity of E in feet per second 1.4 Find the…
Q3/ For the crank- connecting rod mechanism shown: OA= 10cm , AB= 30 cm, AC= 10 cm, it's single degree of freedom coordinate is e. If angular velocity of OA=30 rad/sec. Find angular velocity AB at e = (30)° crank angle. A C 8.7 rad/sec O23 rad/sec O 16.3 rad/sec
The crank-rocker mechanism shown has lengths n = 9 in, r2 = 2 in, r3 = 7 in, andr4= 10 in. Find the angular displacement Aa that crank OA makes to move the rocker OpB from the extreme right to the extreme left position. Crank OAA rotates counterclockwise as shown. Write your answer in degrees but do not write the units. B A 0B Answer. DELL
Link 2 of the mechanism shown rotates about the z-axis w.r.t. the ground (Link 1) at a constant +2rad/s. Link 3 rotates about a pin joint currently aligned with the y-axis at a constant -3rad/s. What is the angular velocity of the link? Angular velocity (rad/s): type your answer.... i+ type your answer... j+ type your answer... k. Answer with integers. Include a minus sign if necessary. Don't include a plus sign. Z A 2 3 — X ►
Another very common basic mechanism is the "four-bar" (the ground is considered one of the bars). The class has designed this demonstration four-bar with dimensions 2.2ft , 4.6ft and 1.0ft . In the position shown, coupler BC is horizontal, rocker CD is vertical and are easily found), and crank AB is rotating at a constant angular (therefore dimensions velocity of 11.8 rad/s Determine the angular velocity of rocker CD. NOTE: Magnitude should be entered here, direction in part 2 of this problem. A LAB WAB B 0A counterclockwise. LAD LBC D LCD