Superheated steam from the boiler expands in the turbine from inlet pressure p₁ of 50 bar and temperature T₁ of 487 °C to condenser pressure p2 of 18 kPa. In the condenser, the steam condenses to saturated water. The isentropic efficiency of the turbine ns is 78.0 %. The mass flow of steam 9m,h is 140 kg/s. In the boiler, heat flow rate to the circulating fluid (water/steam) is 458 MW. Read from h,s-diagram and calculate: 4. Turbine power Pt MW (with one decimal accuracy) 5. Steam content at the turbine outlet X2 kJ/kg (with two decimal accuracy) 6. Enthalpy after condenser h3 kJ/kg (with zero decimal accuracy) 7. Thermal power of condenser Qc MW (with one decimal accuracy) 8. Thermal efficiency of the plant n % (with one decimal accuracy)

Superheated steam from the boiler expands in the turbine from inlet pressure p₁ of 50 bar and temperature T₁ of 487 °C to condenser pressure p2 of 18 kPa. In the condenser, the steam condenses to saturated water. The isentropic efficiency of the turbine ns is 78.0 %. The mass flow of steam 9m,h is 140 kg/s. In the boiler, heat flow rate to the circulating fluid (water/steam) is 458 MW. Read from h,s-diagram and calculate: 4. Turbine power Pt MW (with one decimal accuracy) 5. Steam content at the turbine outlet X2 kJ/kg (with two decimal accuracy) 6. Enthalpy after condenser h3 kJ/kg (with zero decimal accuracy) 7. Thermal power of condenser Qc MW (with one decimal accuracy) 8. Thermal efficiency of the plant n % (with one decimal accuracy)

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter45: Domestic Refrigerators And Freezers

Section: Chapter Questions

Problem 13RQ: Condensers in these refrigerators are all_______cooled.

See similar textbooks

Similar questions

Superheated steam from the boiler expands in the turbine from inlet pressure p₁ of 50 bar and temperature 7 of 487 °C to condenser pressure p2 of 18 kPa. In the condenser, the steam condenses to saturated water. The isentropic efficiency of the turbine ns is 78.0 %. The mass flow of steam 9m,h is 140 kg/s. In the boiler, heat flow rate to the circulating fluid (water/steam) is 458 MW. Read from h,s-diagram and calculate: 1. Enthalpy of the superheated steam h kJ/kg (with zero decimal accuracy) 2. Enthalpy of the steam at turbine outlet after isentropic expansion h₂s kJ/kg (with zero decimal accuracy) 3. Enthalpy of the steam at turbine outlet h₂ kJ/kg (with zero decimal accuracy) 4. Turbine power Pt MW (with one decimal accuracy) 5. Steam content at the turbine outlet X2 kJ/kg (with two decimal accuracy) 6. Enthalpy after condenser h3 kJ/kg (with zero decimal accuracy) 7. Thermal power of condenser Qc 8. Thermal efficiency of the plant n MW (with one decimal accuracy) % (with one…
A refrigerant 22 vapor compression system includes a liquid-to-suction heat exchanger in the system. The heat exchanger cools the saturated liquid from the condenser from 32°C to 21°C with vapor which comes from the evaporator at -10°C. The compressor is capable of pumping 20 L/sec of refrigerant. What is the enthalpy of the refrigerant at the suction of the compressor neglecting the heat exchanger? What is the isenthalpic value of the refrigerant in the system neglecting the heat exchanger? What is the refrigerant's enthalpy after compression? What is the COP of the system neglecting the heat exchanger? What is the enthalpy of the refrigerant before it enters in the expansion valve? What is the approximate enthalpy of the refrigerant at the suction of the compressor? What is the estimated enthalpy of the refrigerant after compression? What is the COP of the system? What is the refrigerating capacity of the system in TOR if: a.) without hex and b.) with hex?
Unit No. 6 at The Geysers produces 52 MW of power at the generator from a steam flow of 417,000 kg/h at a pressure of 6.9 bar and a temperature of 182°C. The reservoir conditions are known to be 32.3082754 bar and 238°C. The turbine exhaust pressure 2. (condenser pressure) is 0.13 bar. (a) Sketch the location of the reservoir and turbine-inlet state points on the attached Mollier chart (h-s). The requested states should be placed on this h-s diagram. What do you observe about the enthalpy of these two states? What do you notice about these values relative to the maximum enthalpy along the saturated vapor line? (b) On the same diagram, locate the turbine exhaust state. Calculate the turbine isentropic expansion efficiency, 71. Calculate the overall geothermal energy utilization efficiency, 7u, based on (i) reservoir and (ii) turbine-inlet conditions. A sink temperature of 48°C is appropriate for Unit No. 6.
An r-134a refrigerator operates a simple vapor compression cycle (SVCC). The evaporatoroperates at -10 °C, while the condenser operates at 1 MPa. R-134a flows around the system at 10 g/s.a. Graph the cycle in a P-h diagram and calculate the temperature at the exit of the compressor, assuming it is 100% isentropicallyefficient.b. Calculate the power required by the compressor (in W) and the cooling effect of the refrigerator (in kW) c. Compute for the COP of the system. What is its percent difference from the reversible efficiency?
Q5/ A boiler is capable of generating 8 kg steam per kg of fuel at 400°C. Feed water is supplied at pressure of 30 bar, 40°C and leaves economizer at 150 °C for entering to evaporator. Steam leaves evaporator with dryness fraction of 0.98 and enters the superheater. Fuel used has calorific value of 29000 kJ/kg. Considering no pressure loss inside the boiler determine boiler efficiency and fraction of heat given to steam in each section of boiler. Boiler efficiency = 84.52% % fraction of heat in economiser, evaporator and superheater = 15.01%, 69.89% and 15.1%
Problem 1: The boiler of a power steam cycle operates at 6000 kPa and the condenser at 50 kPa. At the entrance to the turbine, the temperature is 500°C. The isentropic efficiency of the turbine is 90 percent, pressure and pump losses are negligible, and the water leaving the condenser is subcooled by 6.3°C. The boiler is sized for a mass flow rate of 18 kg/s. You are asked to: a. Represent the cycle on P-v and T-s diagrams. b. Compute the rate at which heat is added in the boiler. c. Compute the power required to operate the pumps. d. Determine the net power produced by the cycle. e. Compute the thermal efficiency.
A 105 x 205 mm reciprocating R134a compressor operates with a suction pressure of 0.2928 MPa and a condenserpressure of 1.2 MPa. The cycle frequency is 23 cps. The evaporator load is 12.8 tons. The mechanical efficiency ofcompressor is 75%. The clearance volume of compressor is 5% (a) Draw the ph Diagram and Refrigeration System Diagram(b) enthalpy and temperature of superheated vapor (show interpolation)(c) mass of flash vapor entering evaporator, kg vapor/kg refrigerant(d) mass of refrigerant recirculated, kg/s(e) condenser load, kW(f) volume capacity of isentropic compressor at suction, L/s(g) volume displacement of compressor, L/s(h) actual volumetric efficiency, %(i) clearance volumetric efficiency(j) power requirement of isentropic compressor, kW(k) coefficient of performance(l) brake power output of electric motor, kW to drive isentropic compressor(m) power requirement of polytropic compressor, kW for compression efficiency of 80%
2. Steam at 13.8 MPa and 940°C enters a turbine and expands to 3.8 MPa where m1 is extracted for feedwater heating, the remainder is withdrawn and reheated to 720°C. Expansion then occurs to 0.90 MPa, where m2 is extracted for feedwater heating. The remaining steam is withdrawn and reheated to 5800C. Final expansion now OCcurs to a condenser pressure 0.028 MPa. For an ideal cycle and 1kg of steam, find a) Wnet b) efficiency
In a marine gas turbine unit, a high-pressure stage turbine drives the compressor and a low-pressure stage turbine drives the propeller through suitable gearing. The overall pressure ratio is 4/1 and the maximum temperature is 650 oC. the isentropic efficiencies of the compressor, H. P. turbine, L. P. turbine are 0.8, 0.83 and 0.85 respectively and the mechanical efficiency of both shafts is 98 %. Sketch the process on the T-s diagram Calculate the pressure between turbine stages when the air intake conditions are 1.01 bar and 25 oC. Calculate also the thermal efficiency and the shaft power when the mass flow is 60 kg/s. NB: Neglect kinetic energy changes and the pressure loss in combustion.
In a steam turbine plant steam expands in the high pressure turbine from 5000kPa, 500°C to 500kPa with an isentropic efficiency of 0.9. It is then reheated isobarically to 500°C before entering the low pressure turbine. In the low pressure turbine the steam expands to dry saturated, 5kPa. The condensate leaves the condenser with 4° of undercooling. Determine: (a). the condition of the high presfsure turbine exhaust (b). the isentropic efficiency of the low pressure turbine (c). the specific steam consumption for a turbine output power of 7.5MW (d). the Rankine efficiency including the feed pump
The enthalpy entering the turbine of a geothermal power plant is 2750 KJ/kg and ,ass rate of 1 Kg/sec. The turbine brake power is 1000 KW condenser outlet has enthalpy of 210 KJ/kg. If temperature rise of cooling water in condenser is 8, what is the mass of cooling water requirement?
A:0£ I 26ll 4ll HMW-7.pdf > HMW-7: Steam Turbine Power Cycles Steam enters the turbine at 10 MN/m and 450°C. The steam expanded isentropically in the turbine down to the condenser pressure of 20 kN/m?. The power developed by the plant is 5600 kW. The condensate leaving the condenser is pumped to the boiler pressure isentropically. Taking into account the pump work and calculate: • The mass of steam generated in the boiler. • Cycle thermal efficiency. • Specific steam consumption. Draw the cycle on a T-s diagram. Hint: 1 MN/m² = 10 bar ...