Simplify the following three K-Amps and draw the final simplified circuit. Use either Tina or LogiSim If you cannot save the circuit on Tina then copy and paste it onto Word or email. AB 00 CD 01 11 10 00 1 1 01 1 1 1 1 11 1 1 1 1 10 1 1 1 1.

LOGISM 1. Open up your 1-bit adder file from the last time 2. Create a new circuit called 1-bit adder (Project -> Add Circuit) (This should add it to the column on the left) 3. From your main circuit, click and drag over all your circuitry and copy it using ctrl+c 4. Open your 1-bit adder and paste the circuitry over 5. Create a new circuit called 4-bit adder (Project -> Add Circuit) 6. Open up the 4-bit adder and drag and drop four of your 1-bit adders from the column on the left to the inside of your 4-bit adder 7. Instead of creating four individual inputs, let's use a pin (Wiring -> Pin) and drop it in. Set its Data Bits to 4 8. Drag a splitter from the column on the left into your 4-bit adder. 9. Set the bit width in and fan out to 4 each on your splitter (Can be found by clicking on the splitter and looking in the bottom left of the screen) 10. Wire your 4-bit pin into the Splitter and plug the wires coming out of the Splitter into each of your adders 11. Feed the…

The output on this is as follows:   55.90169943749474 579.3240222126375 5.0 6.647869871181236   The output should be: 55.90170 579.32402 5.00000 6.64787   I am not sure how to suppress the decimals to five positions.

Answer me number 7 please don't use ChatGPT it didn't gave me the right answer thank you please hand written