reservoir contains 2.83 m3 of carbon monoxide at 6895 kPa and 23.6oC. An evacuated tank is filled from the reservoir to a pressure of 3497 kPa and a temperature of 12.4oC,while the pressure in the reservoir decreases to 6105 kPa and the te

reservoir contains 2.83 m3 of carbon monoxide at 6895 kPa and 23.6oC. An evacuated tank is filled from the reservoir to a pressure of 3497 kPa and a temperature of 12.4oC,while the pressure in the reservoir decreases to 6105 kPa and the te

Principles of Modern Chemistry

8th Edition

ISBN:9781305079113

Author:David W. Oxtoby, H. Pat Gillis, Laurie J. Butler

Publisher:David W. Oxtoby, H. Pat Gillis, Laurie J. Butler

Chapter9: The Gaseous State

Section: Chapter Questions

Problem 75AP

See similar textbooks

Related questions

Q: Convert 287 kPa to atm 287 kPa

A: As we know that, 1 kPa = 1000 Pa Therefore, 287 kPa = 287 × 1000 Pa = 287000 Pa Also, 1 atm =…

Q: pressure: 708.1 mm Hg volume: 2.965 L temperature: 25.5°C How many moles of CO2 were produced?

A: Answer:- Given data:- Pressure = 708.1 mm Hg = 0.93171066 atm…

Q: Hydrogen chloride gas is synthesized from chlorine gas and hydrogen gas at 370 degrees Celsius and…

Q: Acetylene reacts with hydrogen in the presence of a cata- lyst to form ethane according to the…

A: Mole fraction indicates the relative amounts of compounds in a mixture. It is the ratio of moles of…

Q: At what temperature will 12.00g of Cl2 exert a pressure of 754.4 kPa at a volume of 752 mL?

Q: Suppose, at room temperature, Hg(l) has a density of 13.595 g/cm3, and a liquid metal alloy of Ga,…

A: given data Hg(l) has a density of 13.595 g/cm3, liquid metal alloy of Ga, In and Sn has a density…

Q: Calculate the partial pressure in [bar] of N; in air consisting of N3, Oz, and Ar assuming that the…

A: Answer: This question is based on the density form of ideal gas equation which is shown below:…

Q: At an altitude of 11,000 m (a typical cruising altitude for a jet airliner), the air temperature is…

Q: Assume that worldwide combustion of fossil fuel accounts for an energy use of 500 x 1015 kJ/year.…

A: Amount of energy used each year = 500 x 1015 kJ = 507500 kJ

Q: At 10.0C and 102.5 kPa, the density of dry air is 1.26 gL. What is the average "molar mass" of dry…

A: dear student, since you have asked multiple questions but according to guidelines we will solve 1st…

Q: Sulfuric acid is essential to dozens of important industries from steelmaking to plastics and…

A: Burning reaction of solid sulfur and its ICE table is given below.

Q: 4. A vessel of volume 0.2 m3 contains Nitrogen at 1,013 KPa and 15° C. If 0.2 kg Nitrogen is now…

A: Ideal gas eqation is general gas equation which obeys gas laws under all conditions of temperature…

Q: Gaseous ammonia is injected into the exhaust stream of a coal- burning power plant to reduce the…

A: Given: The rate of flow of exhaust at 955 K = 335 L/s The partial pressure of NO=22.4 torr (0.02943…

Q: Freon-12 (CF₂Cl₂), widely used as a refrigerant and aerosolpropellant, is a dangerous air pollutant.…

A: Pressure = 1.20 atm Temperature = 27◦ C. or 273.15 + 27 = 300.15 K. Volume = 16 dm3 or 16 L.

Q: A clean, dry and open empty flask is being heated in a water bath. Under which conditions before or…

A: 1) The remaining water molecules might evaporated after heating hence giving out more gas molecules,…

Q: Helium is charged into a 0.5 ft^3 vessel where the final conditions indicate a pressure of 300psia…

Q: In a certain experiment, magnesium boride (Mg₃B₂) reactedwith acid to form a mixture of four boron…

A: Since there are multiple questions and the question number is not specified, only the first part is…

Q: Nitrogen gas under an initial pressure of 5.0×106 Pa at 15 ºC is contained in a cylinder of volume…

A: Given, Nitrogen gas under an initial pressure of 5.0×106 Pa at 15 ºC iscontained in a cylinder of…

Q: (C) A student prepares a solution of sodium sulfate. Na,SO,, by adding 6.25 x 10 moram sururnc acid,…

Q: A vessel containing 2.05 moles of helium gas at 23.6 °C has a pressure of 180 kPa. What is the…

Q: Nickel carbonyl, Ni(CO)4, is one of the most toxic substancesknown. The present maximum allowable…

A: Since volume of the room = 12 ft x 20 ft x 9 ft = 2160 ft3 Since 1 ft3 = 28.3168 L Hence 2160 ft3 =…

Q: When hydrogen iodide gas is associated into hydrogen and iodine gases, at temperature of 698.8 K at…

A: When hydrogen iodide gas is associated into hydrogen and iodine gases, at temperature of 698.8 K at…

Q: xactly 25 °C (or 298.15 K) and collected in a 100-mL eudiometer. The experiment was done under a…

A: The balanced equation for the decomposition of KClO3(s) is: 2KClO3(s) ----> 2KCl(s) + 3O2(g)

Q: One of the steps to sweeten sour gas using the Claus process is reacting hydrogen sulfide gas with…

Q: The reaction of metallic aluminum with aqueous hydrochloric acid produces hydrogen gas. 2 Al(s) + 6…

A: The balanced reaction taking place is given as,

Q: A flask containing 179 cm of hydrogen was collected under a pressure of 20.9 kPa. What pressure…

A: According to Boyle's law at constant temperature and number of moles., PV = Constant Or P1V1 =…

Q: Carbon monoxide (MW=28.01 g/mole) can be produced from a reaction between Carbon dioxide and…

A: Given data Molar mass of CO = 28.01 g/mole Reaction : CO2 (g) + C (s) → 2 CO (g) Mass of Carbon…

Q: Determine the mean partial of water vapor. Why is this so much smaller than the typical partial…

Q: The limit to the level of sulfur dioxide (SO,) in ambient air, set by the Turkish National Ambient…

A: Allowed concentration of SO2 = 350 ug/m^3 Now, 1 m^3 = 1000 L So, Allowed concentration = 350/1000…

Q: At 273 K and 1 atm pressure, 1 mol of an ideal gas occupies 22.4 L. In whichparts of the atmosphere…

A: Molar volume = 22.4 L

Q: A hydrocarbon mixture known to contain methane, ethene and butane only has a volume of 6.00L, a…

Q: Calculate the collision frequency, z, and the collision density, ZAA in carbon monoxide, = 260 pm,…

Q: Q\3: Oxygen gas produced from the reaction below was collected above the water at 30 Cº and in a…

A: Given : Temperature = 30°C = 303 K Volume of O2 = 150 cm3 Since 1 cm3 = 10-6 m3 => Volume of…

Q: Nitrogen gas at 30°C is under a pressure of 650 of 296.8 J/kg-K. kPa. Assume a gas constant…

Q: In order to produce solid iron, it first must bc processed from its orc, Fe2O3, in a blast furnace.…

A: The reaction taking place is given as, => Fe2O3 (s) + CO (g) ------> Fe (s) + CO2 (g) Given:…

Q: b)In magnetron sputtering technique, the pressure of Argon gas 10* Torr. What is the density of the…

A: Given : Pressure of Argon gas = 10-3 torr Diameter of Argon gas = 3.83 Å

Q: a 1.2 mol sample of oxygen is placed in a 20L tank at 100kPa, whta is tthe tank temperature?

Q: Nitric oxide is an important neurotransmitter. To prepare to study its effect, a sample was…

A: We have to calculate the moles of neurotransmitter.

Q: At 350 °C and 101.325 kPa, the volume occupied by 48.00 mol of NH3(g) is a.bc × 10ª L. The values of…

A: From gas laws, we know: PV = nRT Where, P = pressure V = Volume N = number of moles of gas R = gas…

Q: Much to everyone"s surprise. nitrogen monoxide (NO) has been found to act as a neurotransmitter. To…

A: The combination of Boyle's law, Charles's law and Avogadro's law gives an equation which indicates…

Q: Potassium chlorate upon heating melts at 355 °C and decomposes at 480 °C. In the presence of MnO2(s)…

A: The balanced equation for the decomposition of KClO3(s) is: 2KClO3(s) ----> 2KCl(s) + 3O2(g)

Q: flask containing 152 cm3 of hydrogen was collected under a pressure of 20.6 kPa. What pressure would…

A: We have give that Initial volume of gas = V1 = 152cm3 Initial pressure of gas = P1 = 20.6Kpa Final…

Q: At 273 K and 1 atm pressure, 1 mol of an ideal gas occupies 22.4 LIn which parts of the atmosphere…

A: Molar volume = 22.4 L

Q: The mass density of phosphorus vapor is 0.6388 kg m-3 at 100°C and 1.60 kPa, which corresponds to a…

A: Solution - Mass density - The mass density of an object is defined as its mass per unit volume. Mass…

Q: if 70L of gas at 20°C and 98.5 kPa is required to completely fill a typical air bag, determine what…

A: Volume = V = 70 L Temperature = 20° C { 0°C = 273.15 K } Temperature = T = 20 + 273.15 K =…

Q: 112 L N2 at 129 kPa and 303 K?

A: 284.95 g of NaN3 is needed.

Question

100%

A reservoir contains 2.83 m3 of carbon monoxide at 6895 kPa and 23.6oC. An evacuated tank is filled from the reservoir to a pressure of 3497 kPa and a temperature of 12.4oC,while the pressure in the reservoir decreases to 6105 kPa and the temperature to 18.3oC.What is (a) the volume of the evacuated tank? How much mass of CO transferred from the reservoir.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Similar questions

What possible uses exist for the natural gas liquids that are removed from natural gas during its processing?
Which of the following quantities can be taken to be independent of temperature? independent of pressure? (a) H for a reaction (b) S for a reaction (c) G for a reaction (d) S for a substance
How does hydraulic fracturing differ from previously used techniques for the recovery of natural gas from the earth?
A gaseous hydrocarbon reacts completely with oxygen gas to form carbon dioxide and water vapour. Given the following data, determine Hf for the hydrocarbon: Hreaction=2044.5KJ/molhydrocarbonHf(CO2)=393.5KJ/molHf(H2O)=242KJ/mol Density of CO2 and H2O product mixture at 1.00 atm, 200.c = 0.751g/L. The density of the hydrocarbon is less than the density of Kr at the same conditions.
Use the appropriate tables to calculate H for (a) the reaction between copper(II) oxide and carbon monoxide to give copper metal and carbon dioxide. (b) the decomposition of one mole of methyl alcohol (CH3OH) to methane and oxygen gases.
Given that a sample of air is made up of nitrogen, oxygen, and argon in the mole fractions 0.78 N2, 0.21 O2, and 0.010 Ar, what is the density of air at standard temperature and pressure?
Some Chem 16.1 students were tasked to perform the ideal gas experiment with some modifications. Instead of magnesium ribbon, the students were to use 0.029 g of aluminum foil. They prepared the eudiometer by adding 6M HCI and filling it with water to the brim. Once the setup was complete, they performed the experiment. Note that the aluminum was completely consumed in the reaction. From the experiment, it was found that the external pressure was 1.05 atm at 30.0 °C, and the volume of the air inside the eudiometer was 33.5 mL. The water level inside the eudiometer is 4.15 cm below the surface of the water level outside. Given these measurements and the following constants, answer the proceeding questions. At 30.0°C, Pvapor = 31.8 mmHg • R = 0.08206 L-atm/mol-K = 62.36 L-torr/mol-K • MWAI = 26.98 g/mol A. Find the value of the pressure of dry air (PDA) in torr. B. Give the balanced chemical reaction of the aluminum metal with the acid. C. Find the experimental mass (in grams) of…
If 8g of ammonium hydroxide is completely decomposed by the reaction below in a closed container with a total volume of 5.00L and at 25°C, what will be the partial pressure of the ammonia gas liberated, in atmospheres? Assume the volume of the liquid is negligible. NH4OH(aq) --> H2O(l)+NH3(g)
(a) A rigid tank contains 1.60 moles of helium, which can be treated as an ideal gas, at a pressure of 28.0 atm. While the tank and gas maintain a constant volume and temperature, a number of moles are removed from the tank, reducing the pressure to 5.00 atm. How many moles are removed? mol (b) What If? In a separate experiment beginning from the same initial conditions, including a temperature T, of 25.0°C, half the number of moles found in part (a) are withdrawn while the temperature is allowed to vary and the pressure undergoes the same change from 28.0 atm to 5.00 atm. What is the final temperature (in °C) of the gas? °C
A chemical engineer must calculate the maximum safe operating temperature of a high-pressure gas reaction vessel. The vessel is a stainless-steel cylinder tha measures 52.0 cm wide and 62.4 cm high. The maximum safe pressure inside the vessel has been measured to be 7.00 MPa. For a certain reaction the vessel may contain up to 25.8 kg of sulfur hexafluoride gas. Calculate the maximum safe operating temperature the engineer should recommend for this reaction. Write your answer in degrees Celsius. Round your answer to 3 significant digits. temperature: C x10 X
In order to produce solid iron, it first must bc processed from its orc, Fe2O1, in a blast furnace. During operation, CO gas (flue gas) is introduced into the furnace at 1650 °C and a pressure of 250 kPa. In this process flue gas reduces iron to its elemental form in the following reaction: 41. Fe;O30) COg Fe+ COz At one point in this process 256.0 L of CO was used to reduce iron ore. Assuming a complete reaction, how many grams of solid iron can be produced. Balanced chemical equation: Mass of Fe (in grams)
A chemical engineer must calculate the maximum safe operating temperature of a high-pressure gas reaction vessel. The vessel is a stainless-steel cylinder that measures 53.0 cm wide and 63.6 cm high. The maximum safe pressure inside the vessel has been measured to be 7.40 MPa. For a certain reaction the vessel may contain up to 28.1 kg of sulfur hexafluoride gas, Calculate the maximum safe operating temperature the engineer should recommend for this reaction. Write your answer in degrees Celsius, Round your answer to 3 significant digits.