Required information NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. A tractor-trailer rig with a 2000-kg tractor, a 4500-kg trailer, and a 3600-kg trailer is traveling on a level road at v = 90 km/h. The brakes on the rear trailer fail and the antiskid system of the tractor and front trailer provide the largest possible force which will not cause the wheels to slide. The coefficient of static friction is 0.75. V Trailer Trailer Rig 00 00 00 Determine the shortest time for the rig to come to a stop. (You must provide an answer before moving to the next part.) The shortest time for the rig to come to a stop is S.

Required information NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. A tractor-trailer rig with a 2000-kg tractor, a 4500-kg trailer, and a 3600-kg trailer is traveling on a level road at v = 90 km/h. The brakes on the rear trailer fail and the antiskid system of the tractor and front trailer provide the largest possible force which will not cause the wheels to slide. The coefficient of static friction is 0.75. V Trailer Trailer Rig 00 00 00 Determine the shortest time for the rig to come to a stop. (You must provide an answer before moving to the next part.) The shortest time for the rig to come to a stop is S.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A block is pulled along a rough level surface at constant speed by the force P. The figure shows the free-body diagram for the block. FN represents the normal force on the block; and / represents the frictional force. If the coefficient of kinetic friction, HR , between the block and the surface is 0.30 and the magnitude of the frictional force is 80.0 N, what is the magnitude of the normal force FN? mg OA 410 N OB 160 N OC 1.6 N OD.4.0 NA OE 270 N
Block 1 (19 kg) is setting on the floor of an elevator. A rope pulls vertically up on block 1 with a tension of 10 N. The elevator is moving downward with a decreasing speed and the magnitude of the acceleration is 2 m/s2.On a sheet of paper, draw the free body diagram for block 1 using the two-subscript notation from class. After completing the free body diagram, enter below each force and its x & y-components. Remember that the x-component is the "i" component and the y-component is the "j" component. NET force on Block 1Fnet1 = i + j N FORCES on BLOCK 1Weight force on block 1 by EarthW1E = i + j N Tension Force on block 1 by RopeT1R = i + j N Normal force on block 1 by SurfaceN1S = i + j N
A racetrack curve has radius 90.0 m and is banked at an angle of 12.0. The coefficient of static friction between the tires and the roadway is 0. 400. A race car with mass 1200 kg rounds the curve with the maximum speed to avoid skidding. Part A As the car rounds the curve, what is the normal force exerted on it by the road? Express your answer with the appropriate units. Value Units Submit Request Answer Part B What is the car's radial acceleration? Express your answer with the appropriate units. Value Units Arad = Submit Request Answer
pls send me answer of this question all the parts pls and i will rate you sure, pls solve a,b,c and d and also a and b A 200-kg dragster (racing car) exerts a constant force of 4000 N during a race. The coefficient of kinetic friction between the tires and the pavement is .15. If the drag strip is 1000 m long, determine:a. The net force on the dragster. b. The acceleration of the dragster. c. The time it takes for the dragster to finish the race.d. The dragster's velocity at the end of the race.The dragster now needs to slow down, so it opens a parachute. The force of air drag is 3500 N. The driver also locks the brakes of the dragster, and the coefficient of kinetic friction becomes .75. Determine:a. How long it will take to stop the dragster.b. The distance the dragster travels while stopping.
Determine the magnitude of the force P that would cause block A to accelerate to the right at 4 m/s- Neglect friction and the mass of the pulley. 3 kg P 8 kg Match each item to a choice: Force (P) Choices: 73.8 N # 65.3 N #59.2 N # 25.9 N : 35.6 N 37.8 N
Q1) Yousif pushes toward the right on an 11.0 N force on the box in the opposite direction. The magnitude of the kinetic friction force between the box and the very smooth floor is 4.50 N as the box slides toward the right. Also, the magnitude of the normal force is 98 N. For the above information, find the following? a box with a force of magnitude 31.0 N. Sarah applies 6. The free-body diagram 7. The mass of the box 8. The box's acceleration in the x-direction 9. The box's acceleration in the y-direction 10. coefficient of dynamic friction Q 2) A rope pulls the block up the ramp, as shown in the figure. Find the following: 7. Draw a free body diagram for the block. 8. Write the equation that sums the forces on the block that are parallel to the ramp. 9. Write the equation that sums the forces on the block that are perpendicular to the ramp. 10. What is the acceleration of the block perpendicular to the ramp? 11. What is the friction force? a = 4.3 m/s? T = N A = 0.45 6.0 kg 0= 30°…
1) Consider the masses A and B with weight as shown. If the two systems are released from rest, which block will accelerate more quickly? Note that System A has an externally applied load whereas System B has two weights. For full credit, draw the FBD and IRD of each system, compute the acceleration of each system, and state your final predication. System A System B 6 oz 6 oz 10 oz 10 oz 7:39 PM * 54°F Mostly cloudy 3/2/2022 P Type here to search 99+ End F10 PgUp PoDn PrtScn Home F7 &
Blocks of granite are to be hauled up a 15° slope out of a quarry and dirt is to be dumped into the quarry to fill up old holes. To simplify the process, you design a system in which granite block on a cart with steel wheels (weight w1, including both block and cart) is pulled uphill on steel rails by a dirt filled bucket (weight w2, including both dirt and bucket) that descends vertically into the quarry. How must the weight w1 and w2 be related in order for the system to move with constant speed? Ignore friction in the pulley and wheels and ignore the weight of the cable.
2) After playing a game of pinball, you decide to do some calculations on the launching mechanism. The pinball and the plunger have a mass of 0.30 kg and 0.50 kg respectively. The spring coefficient in the pinball machine is 300 N/m. The original length of the spring is 100 mm and the compressed length is 35 mm. If the coefficient of friction between the ball and the surface is 0.15, calculate the velocity of the ball right before it loses contact with the plunger (in m/s). Note that the plunger is never in contact with the ground and assume the ball slides without rolling. [Ans. to check: 1.23 m/s] HO www
Required information A photograph of the NASA Apollo 16 Lunar Module (abbreviated by NASA as the LM) is shown on the surface of the Moon. Such spacecraft made six Moon landings during 1969 - 72. A simplified model for one of the four landing gear assemblies of the LM is shown. Assume the weight of the LM is uniformly supported by all four landing gear assemblies, and neglect friction between the landing gear and the surface of the Moon. NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. A (2.5, 2.5, -2.2) m B (1.5, 1.5,0) m C(2, 1,-1.2) m D(1,2,-1.2) m Z B D If the LM has 14950 kg mass and rests on the surface of the Moon where acceleration due to gravity is 1.62 m/s2, determine the forces supported by members AB, AC, and AD. (Round the final answers to four decimal places. Include a minus sign if necessary.) The forces supported by members AB, AC, and AD are as follows: TAB 10621 N TAC= 2903 N TAD 6032 N
A crane is lifting a system with a constant speed. The weight of each object is shown. Neglect the mass of the cables. Note that K stands for Kipps [1K = 1,000lbs] and is a unit of force. Do NOT convert or multiply by g. cable 1 How many forces are acting on the ring? 4. ring (2K) 6 How many forces are acting on the spreader bar? cable 2 cable 3 How many forces are acting on the load? 3. 45° 45° Are the forces on the system balanced? yes v spreader bar (20K) cable 4 cable 5 How much tension in is cable 1? K How much tension in is cable 2? K load (48K) BARNHART K How much tension in is cable 3? K How much tension in is cable 4? K How much tension in is cable 5? check answers'
2. A lunar excursion module weighs weights 14.7 KN on earth where g=9.75 m/s?. What will be its weight on the surface of the moon where gm=1.7 m/s?. On the surface of the moon, what will be the force required to accelerate the module at 10m/s?