Question 2 Figure 2 shows a shaft carrying two disc A and b which are fixed with two bearings L and R. Disc A has a mass of 10kg and disc B has a mass of 15kg. The distance between the center of the disc mass from the shaft axis is 6mm for disc A and 4mm for disc B. The angle between the centers of disc A and disc B is 90°. If the shaft rotates at a speed of 300 rpm determine the total force acting on the bearings L and R. mm 6 mm L0.2 m 0.3 m 0.2 m Figure 2

Question 2 Figure 2 shows a shaft carrying two disc A and b which are fixed with two bearings L and R. Disc A has a mass of 10kg and disc B has a mass of 15kg. The distance between the center of the disc mass from the shaft axis is 6mm for disc A and 4mm for disc B. The angle between the centers of disc A and disc B is 90°. If the shaft rotates at a speed of 300 rpm determine the total force acting on the bearings L and R. mm 6 mm L0.2 m 0.3 m 0.2 m Figure 2

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

1. The 60-lb flywheel has a radius of gyration about its shaft axis of ko = 15 inches. Starting at 1 = 0 with a speed of 90 rpm, the flywheel is subjected to a torque that will stop the flywheel in 10 s. The torque M ramps up from 0 to Mmax in 3 s, then holds steady at Mmar until stopped. What must be the value of Mmar?
An inside cylinder locomotive has its cylinder centre lines 1 m apart and has a stroke of 1 m. The rotating masses per cylinder are equivalent to 200 kg at the crank pin, and the reciprocating masses per cylinder to 300 kg. The wheel centre lines are 2 m apart. The cranks are at right angles. The whole of the rotating and 2/3 of the reciprocating masses are to be balanced by masses placed at a radius of 0.8 m. Find the value of variation in tractive effort at 300 rpm. Select one: A. ±58476 N B. ±69780 N C. ±79654 N D. ±12475 N
An inside cylinder locomotive has its cylinder centre lines 1 m apart and has a stroke of 1 m. The rotating masses per cylinder are equivalent to 100 kg at the crank pin, and the reciprocating masses per cylinder to 200 kg. The wheel centre lines are 2 m apart. The cranks are at right angles. The whole of the rotating and 2/3 of the reciprocating masses are to be balanced by masses placed at a radius of 0.8 m. Find the magnitude of the balancing mass on the right most wheel. Select one: A. 55.32 kg B. 322.3 kg C. 225.3 kg D. 115.3 kg
Two gears (A and B) are in mesh (they are interlocked) and both spin around their centers of gravity. Gear A has a radius of .8 ft and is experinceing a 10 ft-lb CW moment Gear B has a radius of 1.2 ft If gear A is initially moving at 60 rpm CW, determine how long it will take for gear B to be rotating at 300 rpm CCW
FOR FIG REFER ATTACHED FILE The shaft is massless. A thin attached triangular mass ‘m’ is mounted on the shaft. Rotational speed of the shaft is ω. Neglect weight effect of attached mass. Bearings are at A and B. Take Z- axis along the shaft axis. X- axis is vertically downward. Y – axis is horizontal. Take origin at mid-point on the shaft. Question: Rotate the shaft by 90 degrees and write the bearing reactions at A and B.
If the speed of the shaft, as shown in Figure 1 below, is 220 rev/min, calculate the magnitudes and orientations of the bearing reactions at A and B for the two-mass system. Given a = b = 250 mm, c = 50 mm, R1 = 60 mm, R2 = 40 mm, m1 = 2 kg, and m2 = 1.5 kg.
Figure 5 shows a lever ABC pivoted at B and having a mass of 6 kg and a grinding radius of 75 mm at B. The lever GDF has a uniform section pivoted at G and has a mass of 1.2 kg. It carries a mass of I kg in F. The ECD chain has a mass of 1 kg and always moves on a vertical axis. It carries a mass of 1kg in E. K1 and K2 spring has a constant of 400 N/m and 1 kNm. Find the natural E K, 50 mm B C A K2 200 mm 300 mm 50 mm G F 350 mm 100 mm frequency of the system. Ignore all pendulum effects. [Ans: 14.68 rad/s]
In the multi-rotor system shown below, m1=2 kg, m2=5 kg, r1=36 mm, r2=65 mm, z1=119 mm, z2=414 mm, θ1=118o, θ2=252o. We have 2 kg masses to balance the multi-rotor shaft. Answer questions a, b, c, and d accordingly. 1/ Determine the radius at which the 2 kg mass will be placed on the R plane (mm). a.35,763 b.268,220 c.53,644 D.107,288 2/Determine the angle (degrees) at which the 2 kg mass will be placed on the R plane. a.69,256 b.83,107 c.90,033 D.55,405 3/ Determine the radius at which the 2 kg mass will be placed on the L plane (mm). a.105,006 b.12,251 c.36,752 D.18,376 4/Determine the angle (degrees) at which the 2 kg mass will be placed on the L plane. a.30,085 b.37,607 c.43,248 D.45,128 solve the question by using the rules of Machine Dynamics
3) These two steel wheels both have an outer radius of 1.0 m and a mass of 450 kg. Because of the way in which the mass is distributed, wheel A has a radius of gyration of 0.65 m and wheel B has a radius of gyration of 0.32 m (both about the center axis of the wheel). Wheel A: Wheel B: Each wheel is mounted on a separate shaft and a crate is lifted by winding a rope around the wheel. If a motor applies a moment of 200 N·m to the wheel, calculate how far will a 25-kg crate rise in 8.0 seconds for Wheel A, then Wheel B (assuming that all parts are at rest at t = 0).
A torque T = 0.30 N-m is applied to a bevel gear B. Bevel gear D meshes with gear B and drives pump A. Gear B has a radius of gyration of 150 mm and a weight of 50 N, whereas gear D and the im- peller of pump A have a combined radius of gy- ration of 50 mm and a weight of 100 N. Find how many revolutions of gear B are needed to get the pump up to 200 rpm from rest. What is the power output of the pump at this speed if it is 90% efficient.
3) These two steel wheels both have an outer radius of 1.0 m and a mass of 450 kg. Because of the way in which the mass is distributed, wheel A has a radius of gyration of 0.65 m and wheel B has a radius of gyration of 0.32 m (both about the center axis of the wheel). Wheel A: Wheel B: Each wheel is mounted on a separate shaft and a crate is lifted by winding a rope around the wheel. If a motor applies a moment of 200 N·m to the wheel, calculate how far will a 25-kg crate rise in 8.0 seconds for Wheel A, then Wheel B (assuming that all parts are at rest at t = 0). Hint: This is a constant angular acceleration and 1 revolution of the wheel equals the circumference of the wheel.
Question 5 A constant torque electric motor is used to drive the punching press. The press is provided with a flywheel that rotates at maximum speed of 125 r.p.m. The radius of gyration of the flywheel is 0.6 m. The press punches 200 holes per hour, each punching operation takes 1.5 second and requires 16 kNm of energy. Calculate the power of the motor and the minimum mass of the flywheel, if its speed is not to fall below 100 r. p. m.