Q2) Steam at a pressure of 10 bar and a dryness friction of 0.97 is to be dischargedthrough a convergent-divergent nozzle to a back pressure of 0.15 bar. The mass flow ratethrough the nozzle is at a rate of 8 kg/kw-hr. If the turbine develops 150 kW, determine:(i) the throat pressure, (i) the number of nozzles required, the diameter of nozzle at throatbeing 6.5 mm, and (iii) suitable exit diameter of the nozzle, assuming that 10% of theoverall isentropic enthalpy drop reheats the steam in the divergent portion of the nozzle.

Answered: Image /qna-images/answer/3796fa87-484f-4aef-a71d-1200529e91e1.jpg

Q2) Steam at a pressure of 10 bar and a dryness friction of 0.97 is to be discharged through a convergent-divergent nozzle to a back pressure of 0.15 bar. The mass flow rate through the nozzle is at a rate of 8 kg/kW-hr. If the turbine develops 150 kW, determine: (i) the throat pressure, (ii) the number of nozzles required, the diameter of nozzle at throat being 6.5 mm, and (iii) suitable exit diameter of the nozzle, assuming that 10% of the overall isentropic enthalpy drop reheats the steam in the divergent portion of the nozzle.

Q2) Steam at a pressure of 10 bar and a dryness friction of 0.97 is to be discharged through a convergent-divergent nozzle to a back pressure of 0.15 bar. The mass flow rate through the nozzle is at a rate of 8 kg/kW-hr. If the turbine develops 150 kW, determine: (i) the throat pressure, (ii) the number of nozzles required, the diameter of nozzle at throat being 6.5 mm, and (iii) suitable exit diameter of the nozzle, assuming that 10% of the overall isentropic enthalpy drop reheats the steam in the divergent portion of the nozzle.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

3.6. The following information is known about the steady flow of methane through a horizontal insulated duct: Entering stagnation enthalpy = 634 Btu/lbm Leaving static enthalpy = 532 Btu/lbm Leaving static temperature = 540°F Leaving static pressure = 50 psia (a) Determine the outlet velocity. (b) What is the stagnation temperature at the outlet? (c) Determine the stagnation pressure at the outlet.
f) A convergent-divergent nozzle receives steam at 4 bar and 200 °C with an initial velocity of 60 m/sec and expands into space at 1 bar. The nozzle efficiency is 92 % throughout the nozzle. For designing a nozzle, calculate the exit velocity. Draw h-s diagram. Also mark values on Mollier diagram and upload with solution.
2. A reciprocating compressor draws in 500 cubic feet per minute of air whose density is 0.079ft/cu. ft and discharges it with a density of 0.304 lb/cu. ft. At the suction, P 1 = 15 Psia; atdischarge, P 2 = 80 psia. The increase in the specific internal energy is 33.8 BTU/lb and the heattransferred from the air by cooling is 13Btu/lb. Determine the work on the air in BTU/min and inhp. Neglect kinetic energy. 3 decimal in final answer pls
In a reaction stage of a stcam turbine the nozzle angle is 20° and the absolute velocity the steam at inlet to the moving blades is 240 m/s. The blade velocity is 210 m/s. If 1.7 the blading is designed for 50% reaction, determine: (i) the blade angle at inlet and exit; il the cathalpy drop per unit mass of steam in the moving blades and in the complete stage; (i) the diagram power for a steam flow of 1 kg/s: (iv) the diagram efficiency. (79.3, 20°; 25.3 kJ/kg; 50.6 kJ/kg; 50.6 kW; 93.5%)
Air with negligible velocity enters the impeller eye of a centrifugal compressor at 15 deg C and 1 bar. The impeller tip diameter is 0.45 m and rotates at 18,000 rpm. Find the pressure and temperature of the air at the compressor outlet. Neglect losses and assume y = 1.4. A. 5.434 bar, 467 K B. 6.434 bar, 567 K C. 7.434 bar, 6467 K D. 8.434 bar, 767 K
Sta. 1- Turbine Inlet P1 = 1.6 MPa T1 = 350 °C hi =? Turbine Power W Turbine = 20 MW Mass Flow m =? Sta. 2 - Turbine Exit P2 = 0.1 MPa T2, hz, x2 ??? Problem 4: Steam enters an adiabatic turbine at a pressure of 1.6 MPa and a temperature of 350 °C. The exit flow is a two-phase mixture of steam and water 0.1 MPa. The exit flow contains 2% liquid water droplets by mass. The power output of the turbine is 20 MW (1 MW = 1 million Watts). Find the following quantities: a. Specific enthalpy of the steam at the turbine inlet: h, =. kJ/kg and, temperature of the steam at the turbine exit: T, = °C b. The quality, of the steam-water mix at the turbine exit: x, =. specific enthalpy of the steam at the turbine exit: h, =, and the kI/kg c. The turbine mass flow: n = kg/sec
In a stage of Parson's reaction turbine, the mean diameter of the wheel is 1.05 m and the speed is 3000 r.p.m. The angles of receiving tips are 35° and the discharging tips is 20°. If the steam flow rate is 1 kg/min, draw the velocity diagram for blades and evaluate, (a) Tangential thrust on blades (b) Axial thrust on blades (c) Power developed in the blades and (d) Diagram efficiency.
(548m/sec, 800m/sec, 32.1 cm2, 60.5cm2) nozzles is 11 kg/sec. Find (a) the throat and exit velocity, (b) 7. steam enters a group of convergent-divergent nozzles at a pressure of 2.2MPA and with a temperature of 260C. Equilibrium expansion through the nozzles to an exit pressure of 0.4MPA. Up to the throat the nozzles the flow can be assumed as frictionless. From throat to exit, however, there is an efficiency of expansion of 85%. The steam flow through the nozzles is 11 kg/sec. Find (a) the throat and exit velocity (h the throat and exit areas.
Pls. Answer this thank you!Steam enters a turbine stage with an enthalpy of 3628 kj/kg at 70 m/s and leaves the same stage with an enthalpy of 2846 kj/kg and a velocity of 124 m/s. Calculate the power in KW if there are 5 kg/s steam admitted at the turbine throttle.
Q4: Why the stroke length of the racing cars' engines is always smaller than its bore diameter?
3. For a Pelton turbine the pressure of the flow before the nozzle is 5 bar while the velocity of flow leaving the nozzle is 31m/s. If the speed of the turbine is 500 rpm and the wheel diameter is 1.5 m, the efficiency of the nozzle will be: а. 0.96 b. 0.97 c. 0.98 d. 0.99 e. None of the them.
HANDWRITTEN and with given, required and solution. Engr. Darmis is tasked to design a frictionless and constant temperature steady-flow system that will be used for power generation using Nitrogen as its working fluid. The initial gage pressure is 110 pounds per square inch and the final volume is 170 cubic feet. If ninety-one pound-mass of the fluid gain 3.253 BTU/R of entropy per minute. Find the (a) initial volume, (b) temperature, and (c) Work. (d) If the heat is equal to 9940 BTU, how long did the process took place?