Q1/ A stream of warm water is produced in a steady flow mixing process by combining 1.0 kg/s of cool water at 25 °C with 0.8 kg/s of hot water at 75 °C. During mixing, heat is lost to the surroundings at the rate of 30 kJ/s. What is the temperature of the warm water stream? Assume the specific heat of water constant at 4,18 kJ/kg K

Q1/ A stream of warm water is produced in a steady flow mixing process by combining 1.0 kg/s of cool water at 25 °C with 0.8 kg/s of hot water at 75 °C. During mixing, heat is lost to the surroundings at the rate of 30 kJ/s. What is the temperature of the warm water stream? Assume the specific heat of water constant at 4,18 kJ/kg K

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

5- Water vapor at 20000 kg / hour flow enters a steam boiler with a specific volume of 225 kPa 0.7565 m3 / kg. With the energy it receives from the fuel in the combustion chamber of the boiler, it rises up to 1200 kPa at 200˚C. Accordingly, how much heat does it gain in a second in the boiler? A. 454.5 kJ/sB. 549.8 kJ/sC. 609.3 kJ/sD. 2349.8 kJ/sE. 1144.7 kJ/s
Refrigerant 134a enters an insulated diffuser as a saturated vapor at 80°F with a velocity of 1400 ft/s. The inlet area is 1.4 in?. At the exit, the pressure is 400 lb;/in? and the velocity is negligible. The diffuser operates at steady state and potential energy effects can be neglected. Determine the mass flow rate, in Ib/s, and the exit temperature, in °F.
Box the final answer. Write legibly. Steam flows into a turbine at a rate of 3.5 kg/s and ¾ MW of heat are lost from the turbine. Ignoring elevation and kinetic energy effects, calculate the power output from the turbine in KW? Steam pressure entering the turbine is 62 Bar at 440ºC and leaves at 74 Kpa.
Time left 0:22:28 Air enters a compressor with h₁ = 378.7 kJ/kg and exists with h₂ = 7134 k/kg Steam enters a turbine with the shown conditions and exis's the turbine with quality x= 15%. If 13.4% of the turbine power is used to drive the compressor and the rest of the turbine power is sed to drive an electrical generator that needs 1.35 MW, what is the mass flow rate of the air (kg/s)? Note: Enter your answer. 1 MPa 10.0MP 700°C Answer: > < Air compressor ON L.P
Q2) Air al 283K and 0.08 MPa enters the diffuser of a jet engine steadily with a velocity of 200 m/s. The inlet arca of the diffuser is 0.4 m2. The air leaves the diffuser with a velocity that is very small compared with the inlet velocity. Determine: a) The mass flow rate of air. b) The temperature of the air lecaving the diffuser.
please show step-by-step calculations. answer choices are 0.34, 0.38, 0.42, 0.54, 0.85, 2.20, 2.58, 2.67, 3.11, 3.15, 1484, 1803, 2087, 2101, 2126
Problem A steam turbine operates with 1,6 MPa and 350 deg C steam at its inlet and saturated vapor at 30 deg C at its exit. The mass flow rate of the steam is 22 kg/s, and 610.2 kW of heat is lost through the casing of the turbine. 1. Create a sketch of the problem and indicate the control volume. 2. Write the continuity and energy equations and cross out terms by stating the relevant steady state assumptions. 3. Determine power produced. 4. Determine the specific work.
Do all parts in detail