Q) A source of 10 V and frequency 1000 KHz with internal resistance of 10 2 isconnected to the sending end of a transmission line which can be represented by aresistance of 70 Q in series with capacitance of 0.001 uF connected across the lineat the receiving end. An inductive load of inductance 0.002 H and resistance 100is connected across the receiving end of the line. Determine the load current.

Answered: Image /qna-images/answer/30ddeace-caef-4282-9421-3b9e0f7142a0.jpg

Q) A source of 10 V and frequency 1000 KHz with internal resistance of 10 2 is connected to the sending end of a transmission line which can be represented by a resistance of 70 2 in series with capacitance of 0.001 uF connected across the line at the receiving end. An inductive load of inductance 0.002 H and resistance 100 2 is connected across the receiving end of the line. Determine the load current.

Q) A source of 10 V and frequency 1000 KHz with internal resistance of 10 2 is connected to the sending end of a transmission line which can be represented by a resistance of 70 2 in series with capacitance of 0.001 uF connected across the line at the receiving end. An inductive load of inductance 0.002 H and resistance 100 2 is connected across the receiving end of the line. Determine the load current.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.14MCQ: The instantaneous power absorbed by the load in a single-phase ac circuit, for a general R LC load...

See similar textbooks

Similar questions

7- DC Chopper with output voltage of 120V and input voltage of 80V and output power of 240W. Assume lossless chopper. The average inductance current IL is * 2.6 A 3.0A 4.3A
QUESTION 50 RG180B/U is a coaxial cable with a nominal impedance of 95 02 and a capacitance per foot of 15.5 pF/ foot. Determine the inductance per foot of this cable. O a. 140 nH/ft Ob.45 nH/ft O c. 95 nH/ft O d.250 nH/ft
6. In symmetrical components, if IRI = 100 z 30° and IY= 20 z 90° What is the value of Is ?
phase The conductirs in a singke line are 6m above the guünd. gnünd. Each conductrs are spaced 3m a pant. Calculate the capacitance Capaci tance per milo, of the live if' bothe thu conductors radii s 75 mum. a.erdudlirg ground ef fet (ufvestal) b. mcluding gound effed.
In non-sinusoidal wave sources, the dissipated power in the load is depends on the value of . . Variable Current Average Current Constant Current All-of-them
estimate the value of equivalent impedance
A circuit consists of an AC voltage source, a 10-ohm resistor, and a capacitor, all connected in series. The magnitude of the impedance of the capacitor is also 10 ohms. Which of the following is true about the phase angle difference between the source voltage and the current through the circuit? a. Insufficient information is given. b. The phase angle difference will be zero degrees. c. The phase angle difference will be 45 degrees. d. The phase angle difference will be 90 degrees.
Two impedances are connected in parallel across a 220-volt source. If Z1= 4 cis (30) and Z2 = 5 cis (60) ohms. Find the equivalent admittance ( Siemen ) of the circuit. O 0.435 cis(- 43.3) O 2.3 cis (43.3) O 0.835 cis (-53.3) O 0.835cis (53.3)
following Series for divergent Test the Condergent or (3n)!
What is the capacitance per kilometer per phase of a single circuit, two bundle conductor line with horizontal configuration? The distance between the bundled conductors is 30 cm and the diameter of each conductor is 5cm. The distance between the centers of the bundle is 5mChoices: 0.0132uF/km 0.0126 uF/km 0.0143uf/km 0.0116uF/km Please in typing format please
Impedances Z1 = 5.83 at angle of -59 deg. and Z2 = 8.94 at an angle of 63.43 deg. are in series and carry an effective current of 5A. Determine the Power and power factor of the circuit indicating if it is leading or lagging.
In the figure, a traveling voltage wave of 500 kV proceeds towards point A. Calculate the voltages and currents in the branches after the first reflection and transmission at point A.