Please determine the hydraulic conductivity of soil sample. The length of soil is 200 cm, outflow rate is 10 cm3/s, the cross-sectional areas of tube, water tank, and soil column are 2 cm2, 200 cm2, and 25 cm2, respectively. The depth of water in the tank is 30 cm, the height of PC is 50 cm, the tilt angle of soil column is 30 degree. 30 degree

Please determine the hydraulic conductivity of soil sample. The length of soil is 200 cm, outflow rate is 10 cm3/s, the cross-sectional areas of tube, water tank, and soil column are 2 cm2, 200 cm2, and 25 cm2, respectively. The depth of water in the tank is 30 cm, the height of PC is 50 cm, the tilt angle of soil column is 30 degree. 30 degree

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter6: Hydraulic Conductivity

Section: Chapter Questions

Problem 6.7P

See similar textbooks

Similar questions

PROBLEM B For a constant head laboratory test on a fine sand, the following are the given values: • Length of the specimen • Di ameter of the specimen 14.00 cm 7.60 cm Head difference 42.00 cm Water collected in 3.50 mins 395 cu.cm Void ratio 0.40 A. Compute for the hydraulic conductivity of the soil in cm/sec. B. Determine the discharge velocity through the soil in cm/sec. c. Determine the seepage velocity in cm/sec.
In the setup below, the soil's hydraulic conductivity is in m/s and it's void ratio is 1. Determine the hydraulic conductivity, the elevation head and pressure head at point A, and the discharge velocity through the soil sample.
Determine the effective vertical hydraulic conductivity, keff, of the rectangular prismatic composite soil sample that is composed of soil A and soil B. Soil A has a hydraulic conductivity, k4, of 1x10 cm/s, and Soil B has a hydraulic conductivity, kB, of 1x106cm/s. Soil A and Soil B both have exactly the same height, width, and thickness (L=12cm, 11-4cm, 8cm). Assume porous stones are placed at the top and bottom of the composite soil sample so that the flow of water is equally distributed to both soil sides. a L A B W
Problem (2) The following data are for a variable head permeability test: Area of soil specimen=1200mm? Length of the soil specimen = 150mm Area of the standpipe = 1.3cm² At time t=0, head difference = 750mm At time t=2min, head difference = 500mm 2 %3D a) Find the hydraulic conductivity of the soil in cm/min.
2. For a falling head permeability test, the following are given. Length of specimen is 380 mm, are of specimen = 6.5 cm², hydraulic conductivity of soil specimen is 0.175 cm/min. a. What should be the area of the stand pipe for the head to drop from 650 cm to 300 cm in 8 min? b. Compute the the interstitial velocity under the test condition if the soil specimen has a void ratio of 0.50 in cm/sec. the head difference at time equal to 6 min. c. Compute
For a falling head permeability test, these valueare given: Length of the soil specimen = 200 mm Area of the soil specimen = 1000 mm2 Area of the standpipe = 40 mm2 Head difference at time, t = 0 min is 500 mm Head difference at time, t = 3 min is 300 mm1. Determine the hydraulic conductivity of thesoil in cm/sec.2. What was the head difference at time, t =100 sec?
A sand has Gs = 2.66. Calculate the hydraulic gradient that will cause boiling for e = 0.35, 0.45, 0.55, 0.7, and 0.8.
For a falling head permeability test, these values are given: Length of the soil specimen = 200 mmArea of the soil specimen = 1000 mm2Area of the standpipe = 40 mm2Head difference at time t = 0 is 500 mmHead difference at time t = 3 min is 300 mm Determine: Hydraulic conductivity of the soil in cm/sec.Head difference at time t = 100 sec.
The Laboratory Apparatus shown maintains aconstant head in both the upper and lowerreservoirs. The soil sample is a silty sand with ahydraulic conductivity K = 5 x 10-3 cm/sec. and amoisture content of 18.5%. Specific gravity of soilsample = 2.70. Compute the seepage velocity.Determine the time required for the plug of water topass through the soil. Compute the discharge ofwater.
2а.) | 15% For a falling-head permeability test, the following are given: • Length of the soil specimen= 20 in. Area of the soil specimen = 4 in.? Area of the standpipe = 0.2 in.? Head difference at time t = 0 is 30 in. Head difference at time t = 10 min is 12 in. Determine the hydraulic conductivity of the soil (in./min). What was the head difference at time t = 5 min?
be the hydraulic conductivity at 20°C? Ans. 1.0 x 10 cm/sec 4. For a normally consolidated clay, the following values are given. k(cm/sec) 0.45 x 10 e 0.78 1.1 0.88 x 10 Estimate k at a void ratio of 0.97 6.0089 107
CVE 331: Theoretical hydraulic conductivity calculation Problem 1: The hydraulic conductivity of a sandy sol is 7x10 cm/sec at void ratio 0.68. What is the hydraulic conductivity at void ratio 0.85 ? (o.re) A= 2,42e k2 ei Problem 2: The hydraulic conductivity of a clay soil is 121o* cm/sec at void ratio 0.56, and 3.1x10 cm/sec at void ratio 0.74. What is the hydraulic conductivity the soll at void ratio 0.65 ? e3 ki %3D - 3. 797 GRAIN SIZE DISTRIBUTION GRAPH. A- PROJECE