Part b) You can use psychrometric chart to solve this part of the question. (while submitting file response answers, you may also submit picture of your working on psychrometric chart) At steady state, a cold moist air stream (stream 1) of 0.1 m/s is available at 10°C, 1 atm, and 10% relative humidity. A hot moist air stream (stream 2) at 40°C, 1 atm, and 60% relative humidity i mal also available. It is required to mix the 2 streams adiabatically to obtain a single stream (stream 3) at a temperature of 20°C. (hint: %3D W3 -W1 i) Determine the humidity ratio of stream 3 kg/kg of dry air. m3/s. ii) Determine the volume flow rate required for stream 2

Part b) You can use psychrometric chart to solve this part of the question. (while submitting file response answers, you may also submit picture of your working on psychrometric chart) At steady state, a cold moist air stream (stream 1) of 0.1 m/s is available at 10°C, 1 atm, and 10% relative humidity. A hot moist air stream (stream 2) at 40°C, 1 atm, and 60% relative humidity i mal also available. It is required to mix the 2 streams adiabatically to obtain a single stream (stream 3) at a temperature of 20°C. (hint: %3D W3 -W1 i) Determine the humidity ratio of stream 3 kg/kg of dry air. m3/s. ii) Determine the volume flow rate required for stream 2

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The following data were obtained from space cooling load survey of an Air-Conditioning (AC) system of a Conference Hall: Sensible Heat Load Latent heat Load 10.5 tons 2.0 tons Design inside condition is set at 22 C dry bulb temperature and 60 percent relative humidity. Cold air is supplied to the Hall at 14 °C. The AC system is designed with mass ratio of 4:1 total supplied cooled air to required minimum outdoor ventilation air. Outdoor air is 30 °C dry bulb and 70 % relative humidity. Determine: a) Recommend an AC system suitable to the set-up above. b) What is the air-cooling apparatus SHF? c) What is the probable Apparatus Dewpoint (ADP)? d) What is the probable cooling coil Bypass Factor (BPF) of the cooling apparatus? e) Fan capacity needed that supplies air to the hall in liters/hour f) Refrigeration capacity of the Air-Cooling Apparatus in tons FOCL
2. Air flowing at 2 kg / s has a dry ball temperature of 60 ° C and a wet bulb temperature of 30 ° C, mixed with another air stream flowing at 3 kg / s at 25 ° C and a relative humidity of 50%. Using a psychrometric chart determine the air flow properties of the mixture. (a) humidity ratio = (kg water / kg air). b. Enthalpy = (kJ / kg) c. Dry bulb temperature. = (° C)
There are 300 cubic meter/min of atmospheric air initially at 25 C wet bulb temperature and 60 % RH flowing thru air duct header junction mixed with 400 cubic meter/min of cold air at 18 C dry bulb temperature and 10 C wet bulb temperature. After the adiabatic mixing, determine for the mixture:a) relative humidity b) specific humidityc) dewpoint temperatured) plot the process on the psychrometric chart and label completely
D. Much of the humidity in the air comes from vaporization from large bodies of water, like the Schuylkill and Delaware Rivers. Assuming the area of Philadelphia is 3.6 x 108 m² and the height of the city is 297 m (top of Comcast center), calculate the energy needed to reach 100% humidity by vaporizing water from the rivers at the afternoon high temperature. (For the sake of this exercise, assume ideal gas applies) a. Having trouble? Review questions from Chapter 10: 51.
Determine the specific humidity, the relative humidity and the enthalpy of the airshow step by step solution
An air-conditioning system to be installed in a factory with sensible and latent cooling loads of 175 KW and 65 KW, respectively. Assume that the relative humidity of supply air is 90%. The inside state is at 21 °C DB and 70% RH. What is the approximate required dry-bulb temperature in °C of the supply state of air? Select one: O a. 17 b. 16 O c. 18 O d. 14.5 Oe. 14 L
During performances, a theatre experiences a sensible heat load of 500,000 Btu/hr and moisture load of 175 Ib/hr. Air enters the theatre at 65°F and 55% relative humidity and is removed when it reaches 75°F or 60% relative humidity, whichever comes first. What is the ventilation rate in mass of air per hour?
Required information Problem 14.108 - Cooling Tower Assessment NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. The cooling water from the condenser of a power plant enters a wet cooling tower at 40°C at a rate of 91 kg/s. The water is cooled to 25°C in the cooling tower by air that enters the tower at 1 atm, 23°C, and 60 percent relative humidity and leaves saturated at 32°C. Neglect the power input to the fan. Use data from the psychrometric chart and tables. Problem 14.108.a - Cooling Tower Assessment Determine the volume flow rate of air into the cooling tower. m³/s. The volume flow rate of air is
Moist air at 25 °C and 50% relative humidity enters a dehumidifier operating at stecady state with a volumetric flow rate of 280 m/min. The moist air passes over a cooling coil and water vapor condenses. Condensate exits the dehumidifier saturated at 10°C. Saturated moist air exits in a separate stream at the same temperature. There is no significant loss of energy by heat transfer to the surroundings and pressure remains constant at 1.013 bar. Determine (a) The mass flow rate of the dry air, in kg/min. ANA (b) The humidity ratios at the inlet and outlet using the psychrometric chart (Show the procedure on the attached chart). HMIAH (c) The required refrigerating capacity, in tons.M N Take: 1 ton = 211 kJ/min R = 8314 J/kmol.K Ma = 28.97 kg/kmol %3D %3D %3D Cooling col Heating coil 1sated CAV), -280 m 10°C T 25°C Coahrpl volume Condensate rated al 10°C
Required information NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. An air-conditioning system operates at a total pressure of 1 atm and consists of a heating section and a humidifier that supplies wet steam (saturated water vapor) at 100°C. Air enters the heating section at 10°C and 70 percent relative humidity at a rate of 32 m /min, and it leaves the humidifying section at 20°C and 60 percent relative humidity. Use data from the tables. Sat. vapor 100°C Heating coils Humidifier 10°C Air 20°C 70% 60% ymYmin P=1 atm Determine the temperature and relative humidity of air when leaves the heating section. The temperature is °C. The relative humidity is %.
For each of the given initial state parameters, select the appropriate enthalpy value: Note: Tdb - dry bulb temperature, F h -enthalpy, Btu/lbair RH - relative humidity, %
Thermodynamic