|!;9 ELABORATE Try solving the following problem: Practice Problem: The following are the results of a consolidation test on a sample soil: a. Plot the e-log o' curve b. Using Casagrande's method, determine the preconsolidation pressure. c. Calculate the compression index, Cc e 1.1 1.085 1.055 1.01 0.94 0.79 0.63 Pressure, o' (ton /ft²) 0.25 0.50 1.00 2.00 4.00 8.00 16.00

|!;9 ELABORATE Try solving the following problem: Practice Problem: The following are the results of a consolidation test on a sample soil: a. Plot the e-log o' curve b. Using Casagrande's method, determine the preconsolidation pressure. c. Calculate the compression index, Cc e 1.1 1.085 1.055 1.01 0.94 0.79 0.63 Pressure, o' (ton /ft²) 0.25 0.50 1.00 2.00 4.00 8.00 16.00

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter11: Compressibility Of Soil

Section: Chapter Questions

Problem 11.15P

See similar textbooks

Similar questions

Q: I an oedometer test on a specimen of saturated clay (Gs = 2.72), the applied pressure was increased from 107 1o 214 kPa and the following compression readings recorded: TaBLE| Tmen 0 025 05 1 225 4 &5 9 16 Guugelmm) 78 742 732 721 6% 678 &6 643 637 Teme(mi) 25 % 4 s om0 X0 a0 Guge(nm) 629 626 621 618 616 615 610 602 After 1440 min, the thickness of the specimen was 15.30 mm and the water content was 23.2%. Determine the values of the coefficient of consolidation and the compression atios from (a) the root time plot and (b) the log time plot. Determine also the values of the coefTicient of volume compressibility and the coefficient of permeability.
The results of a laboratory consolidation test on a clay specimen are the following. Pressure, ir (lb/ft²) 500 1.000 2.000 4.000 8,000 16.000 Total height of specimen at end of consolidation (in.) 0.6947 0.6850 0.6705 0.6520 0.6358 0.6252 Given the initial height of specimen = 0.748 in.. G specimen = 95.2 g. and area of specimen = 4.91 in.²: a. Plot the e-log or curve = 2.68. mass of dry b. Determine the preconsolidation pressure c. Calculate the compression index, C.
In falling head permeability test the initial head was 350 mm and the final head was 50 mm. The cross-sectional area of the burette was 200 mm2. The sample was 50 mm in diameter and 100 mm long. If the test took 8 hours and 45 minutes, what was the coefficient of permeability of the soil in m/s? a.7.15 x 10-7 m/s b.6.29 x 10-7 m/s c.7.89 x 10-7 m/s d.8.78 x 10-7 m/s e.5.69 x 10-7 m/s
Undrained triaxial tests are to be carried out on soil samples which have property as c = 0.28 kg/cm²2 and internal friction angle as 27°. Determine a) Deviator stress if cell pressure is 2.2 kg/cm². (At failure) b) The cell pressure. If failure of sample occurs when deviator stress gains the value as 1.61 kg/cm². BI UGG ΤΣ Ε Submit my answers G
Q2: The dial readings recorded during a consolidation test at a certain load increment are given below. Determine c, by both the square root of time and log of time methods. The thickness of the sample = 2 cm and the sample is drained both sides. Time Dial Reading Time min Dial Reading cm x 10-4 min cm x 10-4 0 240 15 622 0.10 318 H 30 738 C₁=0.848- 0.25 340 60 842 0.50 360 120 930 1.00 385 240 975 2.00 415 1200 1070 C,=0.197 4.00 464 8.00 530 90 H² tso
Table 2.A consolidation test data An oedometer test is conducted for a soil sample.The sample is consolidated under vertical stress of 50 kPa. The Time (min) Dial gauge reading (mm) 194 0.01 0.02 193 0.05 190.5 oedometer test finished at 144 min and 0.1 186.5 data are given in Table I. Average thickness of the sample is 20 mm. Predict the coefficient of 0.2 181 0.5 173 1 168 2 164.5 consolidation (c, in mm?/min) using Casagrande log t method and Taylor square root of t method. Please use the empty graphical papers. 5 161.5 10 160 20 158.5 50 156.9 100 155.7 144 155.1
From the constant head permeability test arrangement shown, the following values are given: Void ratio of specimen = 0.46 Length of Soil Sample = 450mm Constant head difference = 700mm Water collected in a period of 3 min = 0.000354 m3 Cross-sectional Area of Soil Sample = 0.00226 m2 Determine the coefficient permeability in m/hour (Ans: 2.102 m/hr) Compute the discharge of velocity in m/min. (Ans: 0.052 m/min) Compute the seepage velocity in m/min. (Ans: 0.165 m/min)
a .l zain IQ elearning7.uokufa.edu.iq CHAPTER SEVEN STERSSES WITHIN SOIL MASS Н.W The detailed results of a standard Proctor test on a soil classified as CL-ML and group name silty clay with sand are shown in the table below. Determine the maximum dry unit weight and optimum water content. Diameter of mould = 4 in. Height of mould 4.584 in. Volume of mould = 1/30 ft3. Weight of mould, M = 4.45 lb. Unit weight data Water content data Weight of wet soil and mold (Ibs) Mass of can and wet soil (grams) Mass of can and dry soil (grams) Mass of can (grams) M. M. M. 7.32 114.92 111.48 7,57 163.12 155.08 7.68 190.43 178.64 46.20 193.13 178.24 46.50 7.65 188.77 171.58 46.10 II
Q # 2. The following are the results of a consolidation test on a sample of a clayey soil. Pressure, o'(kN/m²) e 1.116 25 1.108 50 1.055 100 0.962 200 0.845 400 0.755 800 0.65 1600 0.658 800 0.675 400 0.685 200 Plot the e, log o' curve. b. Using Casagrande's method, determine the preconsolidation pressure. c. Calculate the compression index, Ce, and the ratio of Cy/Cc. a. Note: Use excel for calculation and drawing. Discuss the details in your own words.)
Homework 1-Results from liquid and plastic limit tests conducted on a soil are Moisture given below. Plastic limit tests: PL 13.4% a) Draw the flow curve and obtain the liquid limit. b) What is the plasticity index of the soil? C) Determine the liquidity index of the soil if Win situ = 32% Number of blows, N content (%) 39.2 %3D 15 34.5 22 26 31.2 29.0 %3D 29 U.S. sieve no. Mass of soil retained 1- The followi
Geotechnical Engineering (UPVOTE WILL BE GIVEN. PLEASE ANSWER THE QUESTION CORRECLTY. NO LONG EXPLANATION NEEDED. FOLLOW THE INSTRUCTIONS CAREFULLY.) A moist soil weighed 895 g with a volume of 425 cm3. After drying, the sample weighed 775 g. Of the dried soil, 400 g was poured into a vessel loose state. Its volume subsequently determined to be 275 cm3. That same 400 g was then vibrated and tamped to a volume of 212 cm3 with Gs = 2.71. Determine the designation of the granular soil based on its relative density. (3 decimal places - Do not round off unless it's the final answer)
Geotechnical Engineering (UPVOTE WILL BE GIVEN. PLEASE ANSWER THE QUESTION CORRECLTY. NO LONG EXPLANATION NEEDED. FOLLOW THE INSTRUCTIONS CAREFULLY.) A moist soil weighed 895 g with a volume of 425 cm3. After drying, the sample weighed 775 g. Of the dried soil, 400 g was poured into a vessel loose state. Its volume subsequently determined to be 275 cm3. That same 400 g was then vibrated and tamped to a volume of 212 cm3 with Gs = 2.71. a. Determine the relative density of soil in %. b. Determine the designation of the granular soil based on its relative density.