If u is unknown, using Michel's formula for transition, find the value of u₁ =10_cal such that both separation and transition occur at the point of separation. (i.e. the two points are co-located.) When, u₁ >10_col, state whether the transition point x,, is upstream (towards the leading edge) or downstream (towards the trailing edge) of the point where separation occurs? Take the kinematic viscosity to be: v=1.5×105 m²/s. Neglecting freestream turbulence, the decelerating freestream velocity profile over a flat plate is given by, u=u₁ (1-x/L)", with L = 10m.

If u is unknown, using Michel's formula for transition, find the value of u₁ =10_cal such that both separation and transition occur at the point of separation. (i.e. the two points are co-located.) When, u₁ >10_col, state whether the transition point x,, is upstream (towards the leading edge) or downstream (towards the trailing edge) of the point where separation occurs? Take the kinematic viscosity to be: v=1.5×105 m²/s. Neglecting freestream turbulence, the decelerating freestream velocity profile over a flat plate is given by, u=u₁ (1-x/L)", with L = 10m.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A hydrodynamic journal bearing is subject to 2000 N load at a rotational speed of 2000 rpm Both bearing bore diameter and length are 40 mm. If radial clearance is 20 um and bearing is lubricated with an oil having viscosity 0.03 Pa-s, what is the Sommerfield number of the bearing?
QI A ball made of INOX AISI 365 steel with density of 8.52 gricm3 was used to determine the viscosity of oil with specific gravity of 0.91. In the viscometer, the ball traveled 19 cm in 2.2 seconds. If the diameter of the ball is 2.95 mm, what is the viscosity of the oil in pa.s ? assume that water density is 1000 kg/m'.
Can i get the answer as an image i cant see the hold write up Tried using my laptop same issue
n = Xe()r -------Equation 1 where X = 1.7419 and (E/R) = -0.018 are constants for a given fluid. You are required to carry out appropriate calculations on the effect of changes in temperature given in table A by using equation 1 for Ethanol on the viscosity of a fluid. Table A NO Temperature viscocity n T°C cP 10 3 20 30 5 40 6. 50 7 60 8 70 In addition to this, calculate other constraints such as the variety of shear stress (T) and force due to fluid viscosity, when the two layers of different compressible Newtonian fluids are contained between two flat plates separated by a distance of 0.05m and fluid moving with the velocity of 2m/s in the horizontal direction. Assume the shear area between the fluid layers is 0.5m². To do this you required to explain, with examples, the effects of temperature and shear forces on Newtonian and non-Newtonian fluid. Also, explain the operation and constraints of different viscometers that quantify viscosity in fluids. 2.
Question 1: Define and state the viscosity equation for a Coutte flow. Question 2: Develop and algebraic equation for viscosity of a liquid as a function of temperature. Calculate the kinematic viscosity of water at T = 303 K. Question 3: If a liquid water at 300C is flowing in a pipe and the pressure drops to the vapor pressure, what happens in the water and why, explain?
Provide detailed explanation: Explain the variation of the viscosity of a fluid withA. TemperatureB. PressureC. DensityD. Temperature & amp; pressureE. Temperature, pressure & amp; density
Question: The Viscosity Of A Fluid Is To Be Measured By A Viscometer Constructed Of Two 75 Cm Long... The viscosity of a fluid is to be measured by a viscometer constructed of two 75 cm long concentric cylinder. The outer diameter of the inner cylinder is 15 cm as shown in Figure 2, and the gap between the two cylinders is 0.12 cm. The inner cylinder is rotated at 200 rpm, and the torque is measured to be 0.8 N.m. Determine the viscosity of the fluid? 0.12 cm 200 rpm Figure 2 Fluid Stationary cylinder
5.1 Water is pumped out of a tank through a pipe, 50 mm in diameter.The dynamic viscosity of the water is 1.308 x 10-3 kg/ms.The velocity of the water in the pipe is 0.55m/s. Determine : 5.1.1 The Reynolds number and specify the type of flow in the pipe
f. A study of the physical characteristic of honey was conducted due to the large demand of royal jelly. A capillary tube viscometer was used by a researcher in determining the viscosity of the honey. The viscometer is 250 mm long with an outside diameter of 55mm and effective thickness of 2.5mm and was used horizontally so that the effect of gravity was neglected. At an ambient temperature of 30°C the following data were collected: Q (cc/s) 1.25 1.55 1.80 2.05 ДР (Ра) 10.0 12.5 15 17.5 20.0 2.55 What will be the stress produced per unit length in the tube used in the production of royal jelly if it has a radius of 5mm and a flow of 1 capsule per second. (1 capsule = 0.85 cc of royal jelly).
b
Please solve in simplest terms
Hello! I need the answer of the question attached. Thank you!