Thermodynamics **Transcription for Educational Website:**---**Liquid Water and Steam Mixing Process**Liquid water at 200 kPa and 15°C is entering a chamber by mixing it with superheated steam at 200 kPa and 200°C. The flow rate of the water is 4 kg/s and the steam is fed into the chamber at a rate of 6 kg/s. Given that the heat loss to the surroundings is 600 kJ/min, find:1. The temperature of the mixture at the exit of the mixing chamber.2. The mass flow rate of the superheated steam.3. The wasted work potential during this mixing process.---**Diagram Explanation:**The diagram is a schematic representation of the mixing chamber. It is labeled as follows:- **Inlet 1:** Liquid water entering the chamber. Conditions are 150°C, 4 kg/s.- **Inlet 2:** Superheated steam entering the chamber. Conditions are 200 kPa, 200°C.- **Outlet:** Mixed flow leaving the chamber at 80°C.- The chamber is described as a "mixing chamber" where the two streams combine.- An arrow indicates the heat loss to the surroundings which is 600 kJ/min.This setup provides a visual overview of the mixing process, illustrating the inflows, the mixing chamber, and the outflow conditions.

Answered: Image /qna-images/answer/c222cc53-938a-42fd-8232-737c5bca6876.jpg

Liquid woter at 200 K Pa and 15°C is heated 1n a chumber hy mixing it with Superheated stean at 200 KPa and 200°C, OrZE Liguid water enters, the mixing Chamber 'at a chamber is estimuted to Yose heat to the surroundinga air at 25°C at a rate of 600 KS/mind If the mixture leaues The nixing chamber at 200 K Pa and 80 determine Ca) the maso Plow rate of the 84per heatedsteam and (6) the wasted work potential during Thir rate A 4 Kg/s and the gixing procest 600 KJlmin つS GuIス) 20

Liquid woter at 200 K Pa and 15°C is heated 1n a chumber hy mixing it with Superheated stean at 200 KPa and 200°C, OrZE Liguid water enters, the mixing Chamber 'at a chamber is estimuted to Yose heat to the surroundinga air at 25°C at a rate of 600 KS/mind If the mixture leaues The nixing chamber at 200 K Pa and 80 determine Ca) the maso Plow rate of the 84per heatedsteam and (6) the wasted work potential during Thir rate A 4 Kg/s and the gixing procest 600 KJlmin つS GuIス) 20

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

8. thermodynamics
5.7. For the "standard atmosphere" shown in Fig. 5.5, perform the following calculations= (a) Derive the pressure-height relation for the troposphere. (b) Calculate the pressure at the troposphere-stratosphere boundary. (c) Derive the pressure-height relation for the stratosphere.
Humpty-Dumpty with second law of thermodynamics
Water contained in a piston-cylinder assembly undergoes two processes in series (point 1 to point 2 and point 2 to point 3): point 1: T1 = 100°C and P1 = 5bar point 2: 71= 151.9°C and P2 = 5bar and v2 = 0.300 .300 m³ point 3: 73= 200°C and v3 = .300" kg Use the thermodynamic tables A.2, A.3, and A.4 to answer the following questions: For questions 1, 3, and 5 choose from: subcooled water, saturated water, saturated liquid, saturated vapor, superheated vapor 1) What is the thermodynamic state of water at point 1: 2- What is the specific volume of water at point 1: 3) What is the thermodynamic state of water at point 2: 4) What is the quality of water (x) at point 2: 3) What is the thermodynamic state of water at point 3: 4) What is the pressure of water at point 3: (bar) On paper draw points 1, 2, and 3 on the following P-v and T-v diagrams and show the two processes. Add number values, units, and constant pressure or temperature lines if needed. Specify which table you used to find…
Explain the concept of system reliability and its significance in engineering applications.
THERMODYNAMICS (UPVOTE WILL BE GIVEN. PLEASE WRITE THE COMPLETE SOLUTIONS. NO LONG EXPLANATION NEEDED. ANSWER IN 3 DECIMAL PLACES. BOX THE FINAL ANSWERS. PLEASE ANSWER ALL) An unknown ideal gas (MW=10 kg/kmol and k=1.3) closed system underwent in a cycle described by the following processes below:Process 1-2 : From 40°C and 1 bar to 3 bars isentropicallyProcess 2-3: Polytropically to 5 bars at n=2Process 3-1: Isometrically Find the pressure at the 3rd state in bars and overall change of entropy for the cycle in kJ/kg-K.
Energy: 1. What is the Law of Conservation of Energy? 2. What is the Law of Conservation of Matter? 3. Why do organisms need energy?
Q True or False 1. PMM1 states that: there can be no machine which would continuously supply mechanical work without some form of energy disappearing simultaneously. 2. The filling of a tank is an example of unsteady flow process. 3. For steam nozzle the change in potential energy is zero 4. In case of boiler the change in kinetic energy is zero. 5. For steady flow only interaction between system surroundings are work and heat. 6. Superheated steam behaves like a gas and therefore, it follows gas laws 7. Extensive properties do not depend on the mass of the system. 8. The change of internal energy for an isolated system is equal to heat and work. 9. With the use of centrifugal pump, the heat transfer is maximum. 10. For the flow in reciprocating compressor, the change in the kinetic energy is maximum
* Thermodynamic as a science dealing with the concept of work Ture O O False
what is the term that refers to the total energy content of a system in the topic of Thermodynamics?
Based on the first law of thermodynamics, which of the following is wrong? A the heat transfer equal the work plus energy change B the net heat transfer equals the net work of the cycle c) the heat transfer cannot exceed the work done D the net heat transfer equals the energy change if no work is done
Please show sholutios completely use those formula that i give. thank youuu.... Please answer it in 2hrs.