Ensssprrs wuii. Inside a helical spring of circular cross-section 20 mm in dimater spring is placed having the same cross-section. The mean radius of the outer spring is 80, that of the inner spring is S0 mm. Both the springs are of the same height and have 10 coils With a load being transmitted to both the springs they deflect by 50 mm. In which spring is the maximum shear stress greater, and what are their magnitudes? What is the corresponding load being transmitted? The shear modulus C = 80 GPa for both the spring materials. pe 07. Inside a helical spring of circular cross-section 20 mm in dimater anotherspring is placed having the same cross-section. The mean radius of the outer spring is 80 mm whereasthat of the inner spring is 50 mm. Both the springs are of the same height and have 10 coils each.With a load being transmitted to both the springs they deflect by 50 mm. In which spring is themaximum shear stress greater, and what are their magnitudes? What is the corresponding load beingtransmitted? The shear modulus C = 80 GPa for both the spring materials.%3D

Spring: It is a mechanical device that carries mechanical energy in it. The energy is stored in it…

Inside a helical spring of circular cross-section 20 mm in dimater spring is placed having the same cross-section. The mean radius of the outer spring is 80, that of the inner spring is S0 mm. Both the springs are of the same height and have 10 coils With a load being transmitted to both the springs they deflect by 50 mm. In which spring is the maximum shear stress greater, and what are their magnitudes? What is the corresponding load being transmitted? The shear modulus C = 80 GPa for both the spring materials.

Inside a helical spring of circular cross-section 20 mm in dimater spring is placed having the same cross-section. The mean radius of the outer spring is 80, that of the inner spring is S0 mm. Both the springs are of the same height and have 10 coils With a load being transmitted to both the springs they deflect by 50 mm. In which spring is the maximum shear stress greater, and what are their magnitudes? What is the corresponding load being transmitted? The shear modulus C = 80 GPa for both the spring materials.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter2: Axially Loaded Members

Section: Chapter Questions

Problem 2.8.11P: A bumper for a mine car is constructed with a spring of stiffness k = 1120 lb/in. (see figure). If a...

See similar textbooks

Similar questions

Repeat Problem 11.2-14 using L = 12 ft, ß = 0.25 kips/in., ßRl= 1.5ßL2, and ßR2= 2 ßR1.
Compare the angle of twist 1 for a thin-walled circular tube (see figure) calculated from the approximate theory for thin-walled bars with the angle of twist 2 calculated from the exact theory of torsion for circular bars, Express the ratio 12terms of the non-dimensional ratio ß = r/t. Calculate the ratio of angles of twist for ß = 5, 10, and 20. What conclusion about the accuracy of the approximate theory do you draw from these results?
A small lab scale has a rigid L-shaped frame ABC consisting of a horizontal aim AB (length b = 30 cm) and a vertical arm BC (length c = 20 cm) pivoted at point B. The pivot is attached to the outer frame BCD that stands on a laboratory bench. The position of the pointer at C is controlled by two parallel springs, each having a spring constant k = 3650 N/m. that are attached to a threaded rod. The pitch of the threads is p = 1.5 mm. If the weight is 65 N. how many revolutions of the nut are required to bring the pointer back to the mark?
A bumper for a mine car is constructed with a spring of stiffness k = 1120 lb/in. (see figure). If a car weighing 3450 lb is traveling at velocity v = 7 mph when it strikes the spring, what is the maximum shortening of the spring?
Asap
In a compound helical spring, the inner spring is concentric with the outer spring, but is 9 mm shorter. The outer spring has ten coils of mean diameter 24 mm, and the wire diameter is 3 mm. Find the stiffness of the inner spring if an axial load of 150 N causes the outer spring to compress 18 mm. If the mean coil diameter for the inner spring is 15.94 mm, find the wire diameter of the inner spring when it has eight coils. Both the springs are made of the same material having G = 77 GPa.
Design a helical spring to be used in spring balance with a wire diameter of 6mm and the outside diameter should be limited to 66mm. if the permissible shear stress of the spring material is 325 N/mm? and the Modulus of rigidity is 85kN/mm?. a) Compute the deflection of spring per active turn and the axial load on the spring considering the effect of curvature, take Wahl's factor as Kw= 1.1 b) Calculate the value of axial load neglecting the effect of stress factor. **Note: Please upload your handwritten working/solution to the link provided. The value of Mean diameter of the spring in mm . The Spring Index is. Shear stress factor, neglecting curvature effect . Deflection per active turn in mm Axial Load W in N .. Axial Load W in N. considering effect of curvature .
A helical compression spring has a scale of 500 lb/in., an outside diameter of 2.75 in, a free length of 8 inches and with squared and ground ends. The load is 1,000 lbs and the working stress on the wire material is 65000 psi. If the Wahl factor of 1.25 is to be used, calculate the following: A. The standard wire diameter B. The number of active coil if G = 10 800 000 psi C. The solid height D. The stress at solid height
A helical compression spring is required for a mechanism under static loading with a maximum force of 1250N. The deflection caused by this load is 30mm the ends are squared and ground. The spring has an index of 6 and is made of cold drawn steel wire with tensile strength of 1090 N/mm and modulus of rigidity of 81370 N/mm2. The permissible shear strength is taken as 50% of the ultimate tensile strength. Design the spring and calculate: (a) The wire diameter (b) Mean coil diameter. (c) Number of active coils (d) Total number of coils (e) Free length of the spring (f) Pitch of the coil
A helical compression spring is wound using 0.12-in-diameter phosphor-bronze B159 wire. The spring index C = 10 and the total number of coils is N = 14. You may assume that the spring has both ends squared and ground and is supported between fixed ends. Also, Sgy = 0.45 · Sut- a. Estimate the spring rate. b. Estimate the static load corresponding to the yield strength. c. What should the free length of the spring be to ensure that when it is compressed solid the torsional stress does not exceed the yield strength? d. Calculate the critical value of the free length of the spring to avoid buckling.
3. A helical compression spring with squared and ground ends is made of music wire. It is to have a spring rate of 2,400 N/m. The force corresponding to a solid length is 120 N. The spring index is set to be 10. At closure use a design factor of 1.2 guarding against yielding. For static loading, determine the wire diameter, the mean coil diameter, the number of coils, the free and solid lengths of the spring, and show whether buckling may occur. The helical spring of Problem 3 is subjected to a fluctuating load varying between 20 N and 100 N in service. Estimate the factor of safety guarding against fatigue-failure using a torsional Goodman fatigue criterion with Zimmerli data.
For Hibiscus and Rose Groups A steel helical spring is wound from No. 14 music wire with a mean helix diameter of 0.6 in. The load varies continuously between 10 and 4 lb. Find the factor of safety.