Form the figure shown, a flexible belt placed around a rotating drum of 4-inch radius acts as a brake when the arm ABCD is pulled down by the force P. The coefficient of kinetic friction between the belt and the drum is 0.7. What force P that would result in a braking torque of 400 lb. in., assuming that the drum is rotating counterclockwise. Neglect the weight of the brake arm. 60° A 4 in. B 4 in. 60° -2 in.- D Р

Form the figure shown, a flexible belt placed around a rotating drum of 4-inch radius acts as a brake when the arm ABCD is pulled down by the force P. The coefficient of kinetic friction between the belt and the drum is 0.7. What force P that would result in a braking torque of 400 lb. in., assuming that the drum is rotating counterclockwise. Neglect the weight of the brake arm. 60° A 4 in. B 4 in. 60° -2 in.- D Р

Name: Form the figure shown, a flexible belt placedaround a rotating drum o
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: Form the figure shown, a flexible belt placedaround a rotating drum of 4-inch radiusacts as a brake when the arm ABCD is pulleddown by the force P. The coefficientof kinetic friction between the belt and thedrum is 0.7. What force P that●would resul

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter7: Dry Friction

Section: Chapter Questions

Problem 7.60P: The force P applied to the brake handle enables the band brake to reduce the angular speed of a...

See similar textbooks

Similar questions

The coeffient of static friction between the uniform bar AB of weight W and the ground is 0.45. Find the smallest angle and the corresponding force P that would initiate simultaneous tipping and sliding of the bar.
Form the figure shown, a flexible belt placed around a rotating drum of 4-inch radius acts as a brake when the arm ABCD is pulled down by the force P. The coefficient of kinetic friction between the belt and the drum is 0.7. What force P that would result in a braking torque of 400 lb in., assuming that the drum is rotating counterclockwise. Neglect the weight of the brake arm. 60° B 4 in.. 60° +2 in.- 2 Р
Form the figure shown, a flexible belt placed around a rotating drum of 4-inch radius acts as a brake when the arm ABCD is pulled down by the force P. The coefficient of kinetic friction between the belt and the drum is 0.7. What force P that would result in a braking torque of 400 lb . in., assuming that the drum is rotating Neglect the weight of the counterclockwise. brake arm. 60° 4 in. 60° A B C -2 in.²4in. 2 in. 42×-| -2 D P
Form the figure shown, a flexible belt placed around a rotating drum of 4-inch radius acts as a brake when the arm ABCD is pulled down by the force P. The coefficient of kinetic friction between the belt and the drum is 0.7. What force P that would result in a braking torque of 400 lb in., assuming that the drum is rotating counterclockwise. Neglect the weight of the brake arm. 60° 4 in. A 60° B C |-2in²4in. -in.- D
The figure below shows a cylinder, which is rotating in clockwise direction. A lever is pushing onto the cylinder, thus exerting a braking torque. The lever itself is loaded by a force FE . a) Draw the free-body diagram of the lever, determine the direction of the kinetic friction force.
The system shown below is made up of two pulleys attached to the same shaft, with radii ri and re of 0.29 mm and 0.43 mm, respectively. The total mass of the pulley system is 14 kg and its turning radius is 0.26 mm from its center. The mass of block A is 9 kg and the mass of block B is 2 kg. If the coefficient of kinetic friction between block B and the floor is 0.2, find the angular acceleration of the pulley.
A car has hydraulically operated disc brakes at the front and drum brakes at the rear. The frontbrakes have pistons of 58 mm diameter each, whereas each of the wheel cylinder at the rearbrake has 28 mm diameter. The master cylinder piston has diameter of 40 mm. The brake footpedal has a leverage of 4. If the brake pedal is applied a force of 100 N, Calculate (i) The brakingforce on the front axle, (ii) The braking force on the rear axle.
B r P F A UBC Engineering Your team is prototyping a simple braking system for your model car. The 3.4 kg wheel with a radius of r = rad 0.15 m is rotating at w = 18 - .A servo motor can apply a variable force F, which in its first two seconds of operation is equal to F = 10t N and afterwards is equivalent to a constant force of F = 20 N . If the coefficient of kinetic friction between the braking arm and the wheel is μ= 0.2, determine the time needed for the wheel to come to a full stop. The point of contact P between the wheel and the arm is a distance r = -0.2 + 0.26 ĵ m from point A. The force of the servo motor is applied at exactly half of the horizontal distance to A from the point of contact. Assume the wheel can be treated as a disk and that the braking arm is massless. t =
A flat belt passes over two idler pulleys and under a rotating drumof diameter 8 in. The axle of the drum is free to move vertically ina slot, and a spring keeps the drum in contact with the belt. Whatis the minimum force which should be exerted by the spring if slippageis not to occur when a 30-lb · ft torque is applied to the drum? Thecoefficient of static friction between belt and drum is 0.30 and theangle of contact is 180 degrees.
5. A motor is using a large pulley to pull a crate with a mass of m= 200 kg up a 30 degree incline. The pulley has a mass of m = 50 kg, a radius of r = 0.5 m and a radius of gyration of ko = 0.25 m. The motor supplies a torque of M = (500 +1500) N*m to the pulley. If the crate starts from rest and the coefficient of kinetic friction between the crate and ground is µ = 0.2 (assume the crate immediately starts moving, so no static friction analysis needed). Determine the speed of the crate after it travels 4m. M 777 30°
Page 6 of 8 8. Figure 7 shows a four-wheel drive car of mass m = 970 kg. The coefficients of friction is u=0.6. Neglect the mass of the tyres. (a) Determine the greatest possible acceleration of the race car so that its front tyres do not kave the ground nor the tyres slip on the track. (b) Determine the corresponding reactions on tyres A and B. (c) From (b) above, recalculate the coefficient of friction. If it is not same as either the given values H, or Hk, then in one sentence, state or explain why the difference in values? h=0.55 m a= 1.82 m B b = 2.20 m Figure 7 Page 7 of 8
A ladder of length 2L and mass M is positioned on level ground leaning against a wall such that the angle between the ladder and the horizontal is @. The coefficient of static friction between the ladder and the wall and between the ladder and the ground is jistatic = 0.66. The centre of mass ofthe ladder is halfway along it. For the ladder to be in mechanical equilibrium: Write down equations for the total r- and y-components of the 5 forces acting on the ladder