For the simply supported beam with square cross sectional area as shown in the figure below: 1. Drive the shear force and bending moment equation and then draw them 2. Find the maximum bending stress in the distance of 3 m from the left hand side 3. Find the maximum shear stress at the distance of 4.5 m from the left hand side

For the simply supported beam with square cross sectional area as shown in the figure below: 1. Drive the shear force and bending moment equation and then draw them 2. Find the maximum bending stress in the distance of 3 m from the left hand side 3. Find the maximum shear stress at the distance of 4.5 m from the left hand side

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter4: Shear Forces And Bending Moments

Section: Chapter Questions

Problem 4.5.27P: The simple beam ACE shown in the figure is subjected to a triangular load of maximum intensity q0=...

See similar textbooks

Similar questions

The simple beam ACE shown in the figure is subjected to a triangular load of maximum intensity q0= 200 lb/ft at a = 8 ft and a concentrated moment M = 400 Ib-ft at A. Draw the shear-force and bending-moment diagrams for this beam, Find the value of distanced that results in the maximum moment occurring at L/2. Draw the shear-force and bending-moment diagrams for this case. Find the value of distance a for which Mmaxis the largest possible value.
Determine the internal normal force and shear force, and the bending moment in the beam at points C and D. Assume the support at B is a roller. Point C is located just to the right of the 8-kip load. For your explanation section, complete a FBD of the other side of the beam from the version you did to solve the problem. 8 kip 40 kip · ft A to to D B- 8 ft 8 ft- -8 ft
1: Determine the internal normal force and shear force, and the bending moment in the beam at points C and D. Assume the support at B is a roller. Point C is located just to the right of the 8-kip load. For your explanation section, complete a FBD of the other side of the beam from the version you did to solve the problem. 8 kip 40 kip · ft D B 8 ft – 8 ft 8 ft
For the simply supported beam subjected to the loading shown, derive equations for the shear force V and the bending moment M for any location in the beam. Place the origin at point A. Let a=4.00 m, b=5.25 m, c= 2.50 m, P = 26kN and M = 160kN-m. Construct the shear-force and bending-moment diagrams. Use the bending-moment diagram to determine the maximum positive bending moment, Mmax, pos, and the maximum negative bending moment, Mmax, neg.
The simply supported beam is subjected to the force F = 700 N and the uniform distributed load with intensity w = 150 N/m. Draw the shear force and bending moment diagrams (in your homework documentation) and determine the equations for V(r) and M(x). Take a = 0 at point A. 19 F a Values for dimensions on the figure are given in the following table. Note the figure may not be to scale. Variable Value a 5.2 m 2.6 m 3.12 m Support Reactions The reaction at A is N. The reaction at D is N. Shear Force and Bending Moment Equations In section AB: V(x)= N and M(x)= N-m. In section BC: v(x)- N and M(x)= N-m. In section CD: V(x)- N and M(x)= N-m. A
Consider a beam with two 60-inch-long rods. both rods have a cross section area of 0.50 in 2 . Find the axial stress in each rod, draw the shear and moment diagrams for the beam, and find the maximum stress in the beam. Please do this without knowing the forces in the rods. it is supposed to be an indeterminate beam. Thank you
3 For the beam shown, find the reactions at the supports and plot the shear-force and bending-moment diagrams. V = 9 kN, V2 = 9 kN, V3 = 200 mm, and V4 = 1100 mm. ATAT-V3 Provide values at all key points shown in the given shear-force and bending-moment diagrams. X (mm) B A = B = C = D = E= F= P = Q = E * KN * KN * KN × KN KN x KN ✩ kN.mm *kN.mm D 0.00 Reaction force R₁ (left) = In the shear-force and bending-moment diagrams given, +V 0.00 X (mm) 6.3 kN and reaction force R2 (right) = P 11.7 kN. Q 0.00
Establish the Shear & Moment Equation and Diagram of the loaded beam shown. Consider the Left Body Diagram of each section in establishing the equations. Draw and label the figure properly. Locate the maximum moment and the point of inflection. Figure: 5 kN/m 5 m 12 kN 50 kN-m n D B 2.5m C 2.5 m
For the simply supported beam subjected to the loading shown, derive equations for the shear force V and the bending moment M for any location in the beam. (Place the origin at point A.) Let a=11.0 ft, b-4.5 ft, c= 7.5 ft, w = 4 kips/ft and M = 250 kip-ft. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. 27 W Ay a b Calculate the reaction forces Ay and Cy acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Ax = 0, it has been omitted from the free-body diagram.) W M a B M C b C C₂ C -X
Establish the Shear & Moment Equation and Diagram of the loaded beam shown. Consider the Left Body Diagram of each section in establishing the equations. Draw and label the figure properly. Locate the maximum moment and the point of inflection. Figure: A 5 kN/m 5m B 2.5 m 12 kN C 2.5 m 50 kN-m D
The simple beam AB, shown below, supports a concentrated load of 22 kN and a segment of a non-uniform load varying from 20 kN/m at point C to 40 kN/m at point B.1- Calculate the shear force V and the bending moment M at a cross section located at x = 4.2meters from the support A.2- Draw the shear force and the bending moment diagrams for the beam
The uniform beam with a mass of 500-kg is subjected to three external loads as shown in the figure. Draw the shear force and bending moment diagrams