Figure Y shows a rigid body consisting of beam ABC loaded with a 500 Nm moment, a box with a weight of 600 N, and a tyre hanging down the AB beam. The mass of the tyre is 10kg. The beam is connected to the rest of the system by a pin joint at B and a roller support at C. (g = 9.81 m/s²) %3D

Figure Y shows a rigid body consisting of beam ABC loaded with a 500 Nm moment, a box with a weight of 600 N, and a tyre hanging down the AB beam. The mass of the tyre is 10kg. The beam is connected to the rest of the system by a pin joint at B and a roller support at C. (g = 9.81 m/s²) %3D

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter10: Statically Indeterminate Beams

Section: Chapter Questions

Problem 10.4.39P: A beam supporting a uniform load of intensity q throughout its length rests on pistons at points A,...

See similar textbooks

Related questions

Q: The AB rigid beam in the figure rests on AC and BD supports. The length of the AC support is LAC =…

A: Part 1) The equivalent load for a uniformly varying load w kNm acting over a beam span of L m is…

Q: Consider a wooden rectangular slab of mass M, length L, and width W nailed vertically to a wall. The…

Q: image479

A: Draw the FBD diagram of the given system:

Q: Total Length Of the beam L = 50 cm, Li= 17.5 cm , L2 = 10 cm , L3 =7.5 cm and self weight of beam =…

A: L = 50 cm L1 = 17.5 cm L3 = 7.5 cm Self weight = 5 N F1 = 1.5 N F2 = 1 N F3 = 1.5 N

Q: machine of mass 2000kg originally placed at midspan of a simply supported beam of length 1.2 m…

A: Given:m=500 KgL=2 md=0.1 mw=1.2 mE=206 GPa

Q: Figure 1 ilustrates a cross-section of an aircraft fuselage. The floor beam of the arcraft is…

A: To find the solution to the given questions, we need to find the reaction forces on the simply…

Q: Q.3 A steel column (E = 30 x10 3 ksi) that is fixed at the base and free at the top is constructed…

Q: The structure ABCD, is subjected to horizontal and vertical loads P and Q, Calculate the dis-…

A: Given: To find: Nodal displacements

Q: A beam has a bending moment of 2.5 kN-m applied to a section with a hollow circular cross-section of…

A: Since we only answer up to 3 sub-parts, we’ll answer the first 3. Please resubmit the question and…

Q: Consider a cantilevered, rectangular beam subjected to a load pro- duced by a 1 kg point mass at the…

Q: A rigid beam is supported by a pin at A and two metallic wires at B and C. Determine the force P…

A: I have attached my work below, correct option is option Cplease don't forget to upvote, thanks!!

Q: Consider the frame below consisting of 3 beams with pins at B, C, and D. Beam CDE is 7 meters long,…

Q: round bar of length L. modulus of elasticity E, and weight density tapers uniformly from a diameter…

A: Given:Length of round bar=L,Modulus of elasticity= E,Weight density=γ,Diameter at one end=3DDiameter…

Q: As shown in the figure, a rigid beam with negligible mass is pinned at one end and supported by two…

Q: A 200kg machine is attached to the end of a cantilever beam of length L=2.5m, elastic modulus…

Q: 10. A steel rectangular block, a = 2.4cm wide and b =1.2 cm deep, is subjected to an axial tensile…

A: GIVEN :- Width : a=2.4 cm=0.024 mdepth : b=1.2 cm=0.012 mLength : L=10 cm=0.1 mincrease in length :…

Q: 1. A beam of negligible mass is hinged at support P and has a roller support Q as shown in the…

A: Figure with reaction forces is as below: As Q is hinged joint, it has only reaction which is normal…

Q: A 70kg human steps at the tip of a springboard used to dive in a pool. The springboard has a length…

Q: A beam has a bending moment of 4 kN-m applied to a section with a hollow circular cross-section of…

A: Given data: The maximum bending moment is M = 4 kN-m. The external diameter of the beam is D = 3.7…

Q: In the figure, a 140 kg uniform log hangs by two steel wires, A and B, both of radius 1.25 mm.…

A: Given:mass of the log, m=140 kgradius of wires, rA=rB=r=1.25 mmlength of wire A, LA=2.30 mwire A is…

Q: Figure 1 shows a stepped bar BCD made of steel material with the top end B rigidly fixed to a…

A: Given data:-Young's Modulus, E=200GPa=200×103N/mm2Cross-sectional area of segment BC,…

Q: A 200 kg load is hung on a wire of length 4 m, cross sectional area of 0.2 x 10 -4 m2 and Young’s…

A: Hello. Since you have posted multiple questions and not specified which question needs to be solved,…

Q: A brass rod (E 110 GPa) with cross sectional area of 250 mm2 is loaded by forces P =15 kN, P2 =10…

A: GIVEN DATA- E=110GPa A=250mm2 P1=15KN P2=10KN P3=8KN WE HAVE TO FIND CHANGE IN LENGTH OF BAR

Q: Fx Fx

Q: 50 kN 30 kN A 2 m 1 m 3 m

A: For solution refer below images.

Q: The circle ring whose one end is fixed and the other end is free, acting on the shaft torsional…

Q: Beam ABC is loaded by a uniform load q andpoint load P at joint C. Using the method of…

A: Given data as per question L = 4 m, a = 2 m , q = 15 kN/m, P = 7.5 kN,E = 200 GPa, I = 70.8 X106…

Q: A rigid beam of negligible weight is supported in a horizontal position by 2 rods ma steel and…

Q: The stair beam in the figure will have support reactions. A support is a fixed, B support is a…

Q: A beam has a bending moment of 2 kN-m applied to a section with a hollow circular cross-section of…

Q: Prob. 6.4-6. (a) A glued, laminated (glulam) beam is made by gluing together n planks of width b and…

A: (a) Given Data The half distance of the section is: c=nt2 The width of the section is: b The…

Q: a steel clamped manhole cover, subjected to uniform load Po, consists of a flat plate reinforced by…

A: In order to limit distortion during the machining process, clamping devices are utilized. Once the…

Q: Example The beam ABC is loaded via a 500 N.m couple and a 600 N force as shown The beam is connected…

Q: A solid uniform brick is placed on a sheet of wood.When one end of the sheet is raised (see…

Q: Example The beam ABC is loaded via a 500 N.m couple and a 600 N force as shown. The beam is…

A: Static equilibrium: A body is said to be in static equilibrium if it satisfies the following…

Q: A steel clamped manhole cover, subjected to uniform load Po, consists of a flat plate reinforced by…

A: When a load is applied to a material or structure it tends to bend or deform due to the stress…

Q: a machine mass m = 500 kg is mounted on a simply supported steel beam of length l = 2 that has a…

Q: A beam supported by three identical springs at points A,B,C (see figure). Given that flexural of…

Q: A cantilever solid pole 280 mm in diameter and 3m high weighs 22kN/m³. The pole is subjected to the…

A: Diameter of pole, d=280 mm Height of pole, h=3 m Weight of pole, w=22 kN/m3 Vertical load, P=3 kN…

Q: A rigid beam of negligible weight is supported in a horizontal position by 2 rods made of steel and…

Q: A uniform, 8.0 m, 1150 kgbeam is hinged to a wall and supportedby a thin cable attached 2.0m from…

A: A tension can be defined as the force which exerts in a cable or string due to the stiffness of the…

Q: The beam AB in Fig. P-238 supports a load which varies an intensity of 220 N/m to 890 N/m. Calculate…

A: It is required to determine resultant force magnitude and it's location for given loading

Q: 300 mm 5.5 KN 1500 mm 500 mm

Q: SITUATION. Given: a = 1.5 m, b = 1.5 m, L= 2.4 m W |A B Beam properties: I = 198 x 10° mm* Rod…

A: Given data: a=1.5 mb=1.5 mL=2.4 mE=200 GPad=12 mmI=198×105 mm4 Need to determine the load.

Q: A 15,000 N crane pivots around a friction-free axle at its base and is supported by a cable making a…

A: GivenM=15000Nm=11000N

Q: A simply supported steel beam is subjected to a uniformly distributed load as shown in Figure E5.2.…

Q: Assume portion ABC of the rod is made of steel (Ee= 200 GPa , v=0.3) and portion CD is made of…

Question

Figure Y shows a rigid body consisting of beam ABC loaded with a 500 N-m moment, a box with a weight of
600 N, and a tyre hanging down the AB beam. The mass of the tyre is 10kg. The beam is connected to the rest
of the system by a pin joint at B and a roller support at C. (g = 9.81 m/s²)
A
300 m
300 m
250 m
20
500 Nm
w
a) Draw a free body diagram for the system shown.
b)
Determine the magnitude of the reaction forces on the beam at the supports and find its resultants.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Trending now

This is a popular solution!

Step by step

Solved in 4 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A beam supporting a uniform load of intensity q throughout its length rests on pistons at points A, C and B (sec figure). The cylinders are filled with oil and are connected by a tube so that the oil pressure on each piston is the same. The pistons at A and B have diameter d1and the piston at C has diameter D2. (a) Determine the ratio of d2to d1so that the largest bending moment in the beam is as small as possible. Under these optimum conditions, what is the largest bending moment Mmaxin the beam? What is the difference in elevation between point C and the end supports?
A small dam of a height h = 6 ft is constructed of vertical wood beams AB, as shown in the figure. The wood beams, which have a thickness I = 2.5 in., are simply supported by horizontal steel beams at A and Ä Construct a graph showing the maximum bending stress tram in the wood beams versus the depth d of the water above the lower support at B. Plot the stress0mas(psi) as the ordinate and the depth d(ft) as the abscissa. Note: The weight density y of water equals 62.4 lb/ft3.
Solve the preceding problem (W 250 × 44.8) if the resultant force P equals 110 kN and E = 200 GPa.
A temporary wood flume serving as a channel for irrigation water is shown in the figure. The vertical boards forming the sides of the flume are sunk in the ground, which provides a fixed support. The top of the flume is held by tic rods that are tightened so that there is no deflection of the boards at that point. Thus, the vertical boards may be modeled as a beam AB, supported and loaded as shown in the last part of the figure. Assuming that the thickness t of the boards is 1,5 in., the depth d of the water is 40 in., and the height h to the tie rods is 50 in., what is the maximum bending stress in the boards? Hint: The numerically largest bending moment occurs at the fixed support.
A sign of weight W is supported at its base by four bolls anchored in a concrete footing. Wind pressure P acts normal to the surface of the sign; the resultant of the uniform wind pressure is force fat the center of pressure (C.P). The wind force is assumed to create equal shear forces F/4 in the y direction at each boll (see figure parts a and c). The overturning effect of the wind force also causes an uplift force R at bolts A and C and a downward force (— R) al bolts B and D (see figure part b). The resulting effects of the wind and the associated ultimate stresses for each stress condition are normal stress in each boll (h — 60 ksi); shear through the base plate (th = 17 ksi); horizontal shear and bearing on each bolt ( tfur = 25 ksi and cr^ = 75 ksi): and bearing on the bottom washer at B (or D) (abor = 50 ksi).
Find expressions for shear force V and moment M at x = L/2 of beam BC. Express V and M in term s of peak load intensity q0and be a m length variable L.
Find expressions for shear force V and moment M at v = L/2 of beam AB in structure (a). Express V and M in terms of peak load intensity q0and beam length variable L. Repeat for structure (b) but find Fand M at m id-span of member BC.
The Z-section of Example D-7 is subjected to M = 5 kN · m, as shown. Determine the orientation of the neutral axis and calculate the maximum tensile stress c1and maximum compressive stress ocin the beam. Use the following numerical data: height; = 200 mm, width ft = 90 mm, constant thickness a = 15 mm, and B = 19.2e. Use = 32.6 × 106 mm4 and I2= 2.4 × 10e mm4 from Example D-7
Repeat Problem 11.2-3 assuming that R= 10 kN · m/rad and L = 2 m.
A freight-car axle AS is loaded approximately as shown in the figure, with the forces P representing the car loads (transmitted to the axle through the axle boxes) and the forces R representing the rail loads (transmitted to the axle through the wheels). The diameter of the axle is d = 82 mm, the distance between centers of the rails is Z., and the distance between the forces P and R is A = 220 mm. Calculate the maximum bending stress vmaxin the axle if P = 50 kN.
A foot bridge on a hiking trail is constructed using two timber logs each having a diameter d = 0.5 m (see figure a). The bridge is simply supported and has a length L = 4 m. The top of each log is trimmed to form the walking surface (see Fig, b)LA simplified model of the bridge is shown in Fig. g. Each log must carry its own weight w = 1.2 kN/m and the weight (P = 850 N) of a person at mid-span, (see Fig. b). Determine the maximum tensile and compressive stresses in the beam (Fig, b) due to bending. If load h is unchanged, find the maximum permissible value of load ... if the allowable normal stress in tension and compression is 2.5 M Pa.
Find the shear force and bending moment at points B and D. Note: B lies just to the right of the 150 lbf force and D is just to the right of the bearing at C. The bearing at A is a thrust bearing, while the bearing at C is a journal bearing. 150 lb A Answer: VB = -100 lbf MB = 750 lbf in VD = 75lbf Mp = -750 lbf in I 15 in. B 15 in. C. D 75 lb 10 in.