Design a concentric spring for an air craft engine valve to exert a maximum force of 5000 N under a deflection of 40 mm. Both the springs have same free length, solid length and are subjected to equal maximum shear stress of 850 MPa. The spring index for both the springs is 6.

Design a concentric spring for an air craft engine valve to exert a maximum force of 5000 N under a deflection of 40 mm. Both the springs have same free length, solid length and are subjected to equal maximum shear stress of 850 MPa. The spring index for both the springs is 6.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter2: Axially Loaded Members

Section: Chapter Questions

Problem 2.8.11P: A bumper for a mine car is constructed with a spring of stiffness k = 1120 lb/in. (see figure). If a...

See similar textbooks

Related questions

Q: A centrifugal pump equipped with a variable frequency (speed) drive running at 3500 rpm is dischargi...

Q: The box beam shown in Figure P8.63b has dimensions of b = 80 mm, d = 120 mm, and t = 8 mm. A downwar...

A: Given: The dimension, b = 80 mm The dimension, d – 120 mm The dimension, t = 8 mm The force, F = 42 ...

Q: Determine the gauge pressure at P in the figure below which shows a compound manometer. Take all dim...

A: It is required to determine gauge pressure P

Q: Q6. The two blocks are released from rest. Their masses are ma =40 kg and mg = 30 kg. The coefficien...

Q: Q2/ Suppose we are told that the acceleration a of a particle moving with uniform speed v in a circl...

A: (2): Given: Speed of the particle rotating in a circle of radius r is constant. Hence acceleration i...

Q: Solve for the resultant force.

Q: ship has a displacement of 80,000 tonnes. Its fuel coefficient is 130,000. Estimate the amount of fu...

A: Voyage fuel requirement @ 16 knots = 304.69 tonnes Voyage fuel requirement @ 14 knots = 233.27 tonne...

Q: Select the correct response 88.56 m 61.75 m 81.56 m

A: GivenQ=50L/s=0.05 m3/sN=1450rpmNS≥760 rpm

Q: etermine the specific speed by a pump delivering 5gpm when running at 1350 rpm if the head required ...

Q: A hydro electric installation is to develop 12 200 Hp. The head is 8ft and the speed of rotation is ...

A: Given data: The head of water is H = 8 ftThe speed of rotation is given as N = 150 RPMThe specific s...

Q: A square plate 0.5m x 0.5m weighing 100N is allowed to slide down an inclined plane which is laid to...

Q: A rigid tank contains a gas mixture that consists of 2.5 kg N2, 1.5 kg O2 and 4 kg CO2 at 300 K and ...

Q: At vertical fall, water creates pressure in A. Having 12.62 psi in B, determine pressure in A in kPa...

A: Find the pressure in kpa at STP. Given - Pressure is 12.62 psi.

Q: Find the value of x5 in 1 decimal places (positive value) using Newton-Raphson Method f(x) = 2x2 + x...

Q: scuss the Effect of the action of forces on rigid bo

A: Rigid body: The rigid body is the body which does not deformed when an external force applied on it,

Q: Velomobile Characteristics Mass: 29 kg in addition to the rider Aerodynamic drag: F = 0.0492 V (Newt...

A: Disclaimer: Since you have posted multiple questions we will solve the first question for you. If yo...

Q: Give an Example of a problem on Actual Reheat rankine cycle with complete solution and compare it wi...

Q: A compound bar consisting of bronze, aluminium and steel segments is loaded axially as shown in figu...

Q: A turbine running at 400 rpm has a specific speed of 160 rpm and head available is 41 m. If the rati...

A: GivenN=400rpmNS=160rpmH=41mP=200kW

Q: PROBLEM 17.116 A sknder nod of kengthL and mass m is released from rest in the position shown. k is ...

A: Given Slender rod To find Coefficient of restitution Proof of bouncing

Q: A pump delivers 500gpm of water against a total head of 200 ft and operating at 2000rpm. Changes hav...

Q: A pump receives 8kg/s of water at 230kPa and discharges it at 1200 kPa. Compute the power required i...

A: It is required to choose correct answer

Q: Find the value of xg in 3 decimal places (positive root) using Secant Method (8th Iteration) f(x) = ...

Q: A certain hydraulic lift has an input cylinder with a radius of 2 cms and an output cylinder of radi...

Q: (a) Replace the loading acting on the beam by an equivalent resultant force FR and couple moment (MR...

A: From varignons theorem can replace the the loading of beam into single force.

Q: problem Show that Cg = F where: Cq= Isothermal Compressibility Coefficient psi'

A: Solution: To Derive:

Q: A spherical balloon with a diameter of 4.25 m is filled with oxygen at 25°C and 16 kPag. Determine t...

A: GIVEN DATA- T=25'C Pgauge=16KPa Patm=0.99bar WE HAVE TO FIND MASS

Q: a m an ideal Rankine aycle, steam fieist enters the turbinne 1e Mpa and 4woc. It esxpands to a press...

A: GIVEN DATA- RANKINE CYCLE WORKING BETWEEN 10MPa 400'C AND 10KPa WE HAVE TO FIND GIVEN POINTS

Q: please answer the table

Q: where p(t) is an arbitrary input depending only on time and the output is x(t). Write the equa- tion...

Q: a lake has a deepness floor measured at 0.06 kms. determine the absolute pressure in kPa having ambi...

A: Given data: h=0.06 km=60 mPatm=91 kPa Need to determine the absolute pressure in the lake.

Q: A pump driven by an electrical motor moves 20gpm of water from reservoir A to B, lifting the water t...

A: Given that: Volume flow rate = 20 gpm = 20 gal/min Total head = 255 ft efficiency of pump = 64% = 0...

Q: Solve for the resultant force. F4 F1 F3 1 m F2 125 m 125 m F1 = 602 N F2 = 107 N F3 = 105 N F4 = 382...

Q: A hydro electric installation is to develop 12 200 Hp. The head is 8ft and the speed of rotation is ...

A: GIVEN DATA- POWER =12200hp HEAD H=8ft N=150 rpm Ns=485 WE HAVE TO FIND NO. OF TURBINE

Q: Determine the head developed by a multi-stage pump delivering 50 L/s when running at 1450 rpm if the...

Q: 10-51 Determine the phases present, the compo- sitions of each phase, and the amount of each phase i...

Q: 1) Assume that a lamina is made using glass fiber and epoxy with the following properties: E = 74 GP...

Q: 600 N/m The shaft is supported by a smooth thrust bearing at A and a smooth journal bearing at B. De...

Q: 6. A 130 cc block has a piece of lead tied to it. Suppose that the SG of lead is 11.13 and SG of the...

Q: Two objects are moving in the x, y plane as shown. The magnitude of their total angular momentum (ab...

Q: A jet impinges on a splitter block. The incoming jet is horizontal and has a flow rate of Q, = 8000 ...

A: Given:

Q: Determine the pressure difference between the points at A and B. Take the density of air as 0.03486 ...

A: It is required to determine the pressure difference between A and B

Q: - H.W2 - Find the local force in each member of the shown truss; Assume A and E are constant for all...

A: Answer: The forces in each member of the truss are: ◆ FAB = 883.33 kN (Tension). ◆ FAC = -1104.17 kN...

Q: Water with a velocity of 7.83 m/s flows through a 126 mm diameter pipe. Solve for the mass flow rate...

Q: In the diagram below, a force P of 750 N is applied to the 350 kg block. Find the acceleration of th...

Q: A venturi meter has air flowing through it. The diameter at the entrance is 2.1 in and at the throat...

Q: A pudding mix is being formulated to achieve a total solids content of 20% in the fi nal product. Th...

Q: State other types of pumps use in hydraulic systems and explain for each one its pressure and three ...

A: To find :- Type of pimp and there application

Q: /hat is the fracture energy for tensile tests at room temperature, and impact energy at room emperat...

A: Fracture energy is a significant attribute for the brick unit, especially in the current study, beca...

Q: failure Mode why bellows corrosion.cause of corosion bellows and their solutions

A: Given Bellow To find Cause of corrosion Solution to corrosion

Concept explainers

Forced undamped vibrations

In mechanical engineering, vibration is expressed as the term that occurs due to an object's backward and forward movement about a point of equilibrium. Generally, there are three types of vibrations which are,

Question

Design a concentric spring for an air craft engine valve to exert a maximum force of 5000 N under a
deflection of 40 mm. Both the springs have same free length, solid length and are subjected to equal
maximum shear stress of 850 MPa. The spring index for both the springs is 6.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Step by step

Solved in 3 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A typical compound helical spring consists of two coaxial closed coil spring having the following particulars: Outer spring 1: Mean coil diameter = 100mm Wire diameter = 12.5 mm No. of turns = 15 Inner spring 2: Mean coil diameter = 75 mm No. of turns = 20 Both the springs are of equal initial length when unloaded. If the working stress for each spring is to be the same. The modulus of rigidity for the wire material is 80 GPa. Calculate the following: a. Diameter of steel wire for inner spring b. Stiffness of inner spring c. Stiffness of the compound spring
A typical compound helical spring consists of two coaxial closed coil spring having the following particulars: Outer spring 1: mean coil diameter = 100 mm Wire diameter = 12.5 mm No. of turns = 15 Inner spring 2: mean coil diameter = 75 mm No. of turns = 20Both the springs are of equal initial length when unloaded. Ifthe working stress for each spring is to be same. The modulus of rigidity for the wire material is 80 GPa. Calculate the following:a. Diameter of steel wire for inner spring. b. Stiffness of inner springc. Stiffness of the compound spring. I need answer ASAP. Thank you!
A helical compression spring is 1o exert a force of 8.0 Ib when compressed 1o a length of 1.75 in. At a length of 1.25 in, the force must be 12.0 Ib. The spring will be installed in a machine that cycles slowly. and approximately 200 000 cycles total are expected. The tem- perature will not exceed 200°F. The spring will be installed in a hole having a diameter of 0.75 in. For this application. specify a suitable material, wire diameter. mean diameter. OD. ID. free length, solid length. number of coils, and type of end condition. Check the stress at the maximum operating load and at the solid length condition. The first of two solution procedures will be shown. The numbered steps can be used as a guide for future problems and as a Kind of algorithm for the spreadsheet approach that follows the manual solution.
Design helical compression spring for a service load ranging from 300 N to 375 N. if the permissible shear stress 500 MPa and maximum deflection of the spring for the load range is 8 mm and modulus of rigidity G-80 KN/mm². Draw a fully dimensioned of the spring.
A helical compression spring is to be used for a maximum load of 1.5 kN using the spring index of 8. The maximum permissible shear stress for the spring wire is 400 MPa. Which of the following is the wire diameter of the spring to be used?
A helical spring with a load range of from 450 N to 800 N from valve-closed to valve-open conditions is used to close the valve of a spring-set relief valve having a lift of 10 mm. Assuming the spring wire to be of chrome vanadium steel, the spring is rendering average service, determine the diameter of the wire if the spring index is 7 and Sg - 420 MPa. Use G=83GPA. Select one: O a. 2.4-mm wire O b. 5-mm wire O c. 6-mm wire O d. 7-mm wire
Design a compression helical spring to carry a load of 500 N with a deflection of 25 mm. The spring index may be taken as 8. Assume the following values for the spring material: Permissible shear stress 350 MPa Modulus of rigidity = 84 kN/mm? 4С -1 0.615 Wahl's factor 4C – 4 where C= spring index. C [Ans. d= 5.893 mm; D= 47.144 mm;n=6| %3D
2. A helical valve spring is to be designed for an operating load range of approximately 90 to 135 N. The deflection of the spring for the load range is 7.5 mm. Assume a spring index of 10. Permissible shear stress for the material of the spring = 480 MPa and its modulus of rigidity 80 kN/mm2. Design the spring. 4С - 1 0.615 , C being the spring index. Take Wahl's factor %3D 4С - 4 [Ans. d = 2.74 mm ; D = 27.4 mm ; n = 6]
PROBLEM: 5 A helical valve spring is to be designed for an operating load range of 90N to 195N. The maximum deflection of the spring for this load range is 7.5 mm. Assuming a spring index of 9, a permissible shear stress of 550 N/mm2 for the material and the modulus of rigidity of 0.85x105 N/mm2. Determine the dimensions of the spring. (i.e. Diameter of the spring wire ,Mean coil diameter, Outer diameter of the spring, number of active turn and free length of the spring). Assume the spring coil is squared and ground.
- A flat spiral steel spring is to give a maximum torque of 1500 N-mm for a maximum stress of 1000 MPa. • Find the thickness and length of the spring to give three complete turns of motion, when the stress . decreases from 1000 to zero. The width of the spring strip is 12 mm. The Young's modulus for the material of the strip is 200 kN/mm2.
A semi-elliptic spring used for automobile suspension, consists of twoextra full-length leaves and eight graduated-length leaves, including themaster leaf. The centre-to-centre distance between the two eyes is 1 m.The leaves are made of steel 55Si2Mo90 (S = 1500 N/mm yt2 andE = 207 000 N/mm2) and the factor of safety is 2. The maximum springload is 30 kN. The leaves are pre-stressed so as to equalize stresses in allleaves under maximum load. Determine the dimensions of thecross-section of the leaves and the deflection at the end of the spring.
1. Design a compression helical spring to carry a load of 500 N with a deflection of 25 mm. The spring index may be taken as 8. Assume the following values for the spring material: Permissible shear stress = 350 MPa Modulus of rigidity = 84 kN/mm2 4С - 1 0.615 Wahl's factor where C-spring index. 4С - 4